Question about HP Office Equipment & Supplies

2 Answers

Hp 2210 will not print complete

I am using a program called PCB layout and when I print the schematic there are no lines, just pads? also it will not print tables or any of that.

Posted by on

  • install247 Apr 23, 2009

    Thank you, I will try that.

×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Black ink do not print colored ink prints fine 2210ink jet

Posted on Aug 27, 2009

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 433 Answers

You might try uninstalling and installing the printers drivers, install the latest drivers from HP...

hope this simple fix does the trick for you

Posted on Apr 23, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need a shematic diagram for BN44-00444B or BN44-00444A


This site seems to have the schematic you need, but it apparently requires you to download a download application... not something I'd really feel comfortable doing... and if I did, I'd make sure to uninstall the program immediately after I used it. Service Manual free download schematics datasheets eeprom bins pcb repair...

Jan 02, 2015 | Samsung PN51D550C1F 3D Plasma TV

Tip

PCB DESIGNING - THE ULTIMATE REFERENCE GUIDE


The Old Days
Back in the pre-computer CAD days, PCBs were designed and laid out by hand using adhesive tapes and pads on clear drafting film. Many hours were spent slouched over a fluorescent light box, cutting, placing, ripping up, and routing tracks by hand. Bishop Graphics, Letraset, and even Dalo pens will be names that evoke fond, or not so fond memories. Those days are well and truly gone, with computer based PCB design having replaced this method completely in both hobbyist and professional electronics. Computer based CAD programs allow the utmost in flexibility in board design and editing over the traditional techniques. What used to take hours can now be done in seconds.
PCB Packages
There are many PCB design packages available on the market, a few of which are freeware, shareware, or limited component full versions. Protel is the defacto industry standard package in Australia. Professionals use the expensive high end Windows based packages such as 99SE and DXP. Hobbyists use the excellent freeware DOS based Protel AutoTrax program, which was, once upon a time, the high-end package of choice in Australia. Confusingly, there is now another Windows based package also called AutoTrax EDA. This is in no way related to the Protel software. This article does not focus on the use of any one package, so the information can be applied to almost any PCB package available. There is however, one distinct exception. Using a PCB only package, which does not have schematic capability, greatly limits what you can do with the package in the professional sense. Many of the more advanced techniques to be described later require access to a compatible schematic editor program. This will be explained when required.
Electronics Equipment Repair Center

Ajin Gopakumar Google

on Feb 16, 2015 | Dacor Key printed circuit board - 82633

1 Answer

What is different between electronic circuit & PCB layout.


The electronic circuit is the map of the components and and the flow of the current, (schematic) PCB (printed circuit board) is the layout of the components (where they go and symbols of what they are.
Hope this helps

Jan 12, 2011 | Lands Phones

1 Answer

My hp psc 2210 prints test page but nothing eles it acts like its printing for a line or two then kicks out a blank page


its the problem with your printer's head. firrst check it by cleaning and it remainis on same condition as you mentioned than change your head..........lolx

Jan 06, 2010 | HP PSC 2210 All-In-One InkJet Printer

2 Answers

HP 6110 check cartridge error won't clear with new cartridges. Anyone know how to fix this?


Hi,

You could try this way first as its a lot quicker and easier than the official steps from HP:

Just hold down the ENTER button and then press the MENU button. There will be a series of 3 fast, high beeps. Then everything resists and is a-okay. Both problems go away.

OR The HP way as listed below:

The ink cartridge-related error messages may occur due to one
of the following reasons:

* The ink cartridge does not make a proper electrical contact
* The cartridge is bad or wrong
* The cartridge is remanufactured or refilled

To resolve the error, follow these steps:

Step one: Check the print cartridges and clean the cartridge contacts

Even if the cartridge is new, follow these steps to clean the print
cartridge contacts. Print cartridges have a substance on the contacts
to keep them from corroding during storage that may cause poor
electrical contact between the print carriage and the print cartridge.

1. Verify that the product is turned on.

NOTE: If the HP product is not turned on, you will not be able to
remove the print cartridges.

2. Open the top cover or the cartridge access door in one of the
following ways:

* Pull the control panel forward and then lift the top section
toward the back.
* Open the access door on the left or right of the unit. This door
may be located under the scanner glass lid on some flatbed
products.
* On many flatbed products, you raise the front center section of
the unit to access the print cartridges.
* Raise the cartridge access door on the front of the product.

3. After the print carriage stops moving, unplug the power cord. You
must unplug the power cord to prevent the print carriage from
moving.

4. Remove both print cartridges.

5. Verify that the part number on the cartridge is the correct part
number for the all-in-one and that the carriage is not blocked
preventing the cartridges from moving. Visit the following HP Web
site for a cartridge compatibility chart.

http://h10025.www1.hp.com/ewfrf/wc/genericDocument?lc=en&cc=us&docname=bpa00586

6. The electrical contacts of the print cartridge are coated with a
thin layer of grease to protect them from oxidation. This grease
may inhibit the electrical connection and should be removed. Using
a cotton swab or cloth lightly moistened with distilled, filtered,
or bottled water, clean the electrical contacts of the cartridge.
This usually occurs with a new ink cartridge, but may also occur
with an older cartridge.

NOTE: When an all-in-one is used frequently for black and white
printing but infrequently for color printing (for example,
an all-in-one that is used primarily as a fax machine), the
color cartridge will still eventually fail and need to be
replaced. The pins in the print carriage can cause dents
on the contact points of the color cartridge over time
(usually between six and twelve months).

7. Wipe the contacts with a dry, cotton cloth.
8. Reinsert the cartridges and lock them in place.
9. Close the top cover or access door and plug in the power cord.
10. If the error persists, repeat these steps. If further cleaning
fails to resolve the error, proceed to "Step two: Clean the
print carriage contacts" section.

Step two: Clean the print carriage contacts

Have the following materials available to clean the print carriage
contacts:

* Cotton swabs or any soft material that will not come apart or leave
fibers (for example, a scrap piece of clean cotton cloth).
* Distilled, filtered, or bottled water (tap water may contain
contaminants that can damage the print cartridges).

CAUTION: Be careful not to get ink on hands or clothing.

To clean the cartridge contacts inside the product, follow these steps:

1. Turn on the unit.
2. Open the top cover or cartridge access door.
3. After the print carriage stops moving, unplug the power cord.
4. Remove both print cartridges.
5. Using a cotton swab or cloth lightly moistened with distilled,
filtered, or bottled water, clean the electrical contacts of the
print carriage.
6. On models equipped with locking latches, lower the latches.
7. Wait five to ten minutes for the contacts to dry and then plug in
the power cord. The unit will begin to reinitialize. Wait until
the process is complete before proceeding.
8. Reinsert the print cartridges when prompted and then close the top
cover or access door.
9. If the message recurs, replace the print cartridge indicated by the
message.

* If you are using refilled or remanufactured cartridges or non-HP
cartridges, replace them with new HP cartridges. HP cannot
guarantee that refilled or non-HP cartridges will function
correctly in HP products.


10. If the problem still exists, replace both print cartridges. Since
the cartridges are electronically connected through the printed
circuit board, the cartridge not indicated in the message might be
the causing the failure.

If the issue still persists, please click on the link below and install
the firmware update:

ftp://ftp.hp.com/pub/softlib/software3/COL4415/oj-14700-3/HpAiOFWUpdate2_2.exe

NOTE: Clicking the link may give an error indicating it is
invalid. If this occurs, copy the portion of the address
on the remaining line(s) and paste it at the end of the
address showing in your browser until the complete address
is displayed in the Address box.

1. Download the file "HpAiOFWUpdate2_2.exe" to a local hard drive. Make
note where (in which folder) the file gets copied.
2. The hp all-in-one software for the OfficeJet 6100 series must be
installed on your PC before installing this firmware update. The
OfficeJet 6100 series must also be connected to your PC and turned on
before proceeding.
3. Locate the file "HpAiOFWUpdate2_2" on your hard drive and
double-click the file to install the firmware update.


This should resolve the issue. If you need further assistance, please
reply to this message and we will be happy to assist you further.

You may receive an e-mail survey regarding your e-mail support
experience. We would appreciate your feedback.

Please visit our Owner Services Web site for details on keeping your HP
and Compaq products up and running.

http://www.hp.com/home/ownerservices

I hope this helps

Mike

Jun 14, 2009 | HP PSC 2210 All-In-One InkJet Printer

1 Answer

Mackie 1400 overload lights on


hey Ron
use a larger ground wire it will stop the overload you may have to place it somewhere new but its the size of the wire that trips the overload feature too small and amp will go and protect itself (bigger ground better sound)
hope this helped

Feb 28, 2009 | Bob Mackie Mackie M-1400i Power Amplifier...

1 Answer

Hp psc 2210 all in one printer


You can't load the software that came with the printer.

HP has a Vista page for your printer. Here is a link: PSC2210 Using Vista

Basically, you need to uninstall the software AND delete the printer from your computer. Disconnect your USB cable. Power up your printer. Connect the USB cable.

The above link gives some workarounds for scanning and importing images.

Nov 07, 2008 | HP PSC 2210 All-In-One InkJet Printer

2 Answers

HP PSC 2210xi all-in-one won't print....Please HELP!


I had a problem downloading HP psc 2210 software from the internet after a reinstall of winxp. One of the device drivers was not completing its installation. HP support provide a troubleshoot process to fix the problem. This process is manual but did complete the installation of the device driver. The printer is working.

Feb 14, 2008 | HP PSC 2210 All-In-One InkJet Printer

1 Answer

HP psc 2210 All in One Fax stopped working w/Vista program


Iam affraid HP has full feature printer driver for the PSC 2210 All-In-One on Vista operating Systems,
But you can try the following link:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00808543&lc=en&dlc=en&cc=us&lang=en&os=2093&product=79499

And Also for the Press Enter to Align Cartridge issue try the bellow link:

http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&cc=us&docname=c00042820&dlc=en&product=79499

Good Luck

Jan 15, 2008 | HP PSC 2210 All-In-One InkJet Printer

1 Answer

HP PSC 2210 Vista prints part of page


Call HP tech support - they walked me through an easy work-around that solved this problem for me.

Dec 06, 2007 | HP PSC 2210 All-In-One InkJet Printer

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

86 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Seeker5211
Seeker5211

Level 3 Expert

1089 Answers

kakima

Level 3 Expert

102366 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...