How to calculate standard deviation and varience using casio fx-250. i have no manual available

SOURCE: standard deviation

Is there a PDF with the Statistical procedures for this product? I bought my Casio FX-115 used (second hand). No instructions. I need help using the Statistical functions for my Stats classes:

Correlation Coefficient

Standard Deviation/Variance

Chi-Square

x-x(bar) summations

HELP!

Posted on Nov 19, 2008

SOURCE: how to do standard deviation on a casio fx-300 MS

http://www.geocities.com/calculatorhelp/casiofx300ms.htm

Posted on May 14, 2009

SOURCE: Standard Deviation

Hello,

In the main menu select [STAT] icon to enter Stat mode and display the statistical data lists. Use the satistical data lists to input data and perform statistical calculations. Use the arrows to move the highlighting around the lists.

Exemple: Enter the following values in List 1

1st line enter 90 [EXE]

2nd line 85 [EXE]

3 79 [EXE]

4 75 [EXE]

5 70 [EXE]

6 68 [EXE]

7 56 [EXE]

When finished you press [F2:Calc], then [F1:1Var] and the statistical results appear on screen.

Title of screen : 1-Variable

x bar =74.7142857

Capital Sigma x= 523

Capita Sigma X squared = 39851

x lower case sigma n = 10.5249945

x lower case sigma n-1= 11.3682934

n = 7

Scroll down with Down arrow to access other data

minX =56

Q1=68

Med =75

Q3=85

Xbar -x lower case sigma n =64.1892911

x bar + x lower case sigma n = 85.2392802

maxX=90

Mod=90

All you have to do now, is to look at the theory you learned and interpret what these values mean.

Hope it helps.

Posted on Sep 19, 2009

SOURCE: FX-115ES Scientific Calculator: how to do standard deviation...

I assume you know the theory. I will show you the key strokes for
1-Var statistics and 2-Var statistics

Press [MODE][3:STAT] [1:1-VAR].
You are ready to
enter values in the X column.

Enter a number and press [=]. Cursor
jumps to second number to enter.

Keep entering numbers and pressing
[=] till all numbers are in. Press the [=] key after the last one.**Press
[AC] key to clear the screen.**

Press
[SHIFT] [STAT] (above digit 1.) then [5:Var]. Screen displays the
statistical variables 1:n ;2: x bar; 3: x sigma n; 4:x sigma n-1.

Press
the
number corresponding to Referable you want, ex 1:n . The
variable appears on screen. Press [=] and it will be displayed.

To
display another variable press [SHIFT][STAT][5:Var][ 1,2, 3, or 4] .

- To access the sum of squares sigma x^2 and the sum of data sigma x
press[SHIFT][STAT][4:SUM] then [1: for sigma x^2] or [2: for sigma x].
Press [SHIFT][STAT][6:MinMax] to access minX and maxX.

To
perform 2 variable statistics you press [MODE][3:STAT] and any of the
other regression options (except 1:1-Var). A two column template opens
where you enter the X and Y values. When finished entering data, press
[SHIFT][STAT][5:Var]. to access the different statistics. As I assumed
above, you should be able to
recognize what each variable means.

Posted on May 21, 2010

SOURCE: How do i use this calculator (casio CFX 9850)to find the variance

Part A shows you how to enter your data and calculate some statistical values. Keep in mind that the variance is the square of the standard deviation.

You can safely ignore the PART about REGRESSIONs until that time you need the information.

PART A

In the main menu select [STAT] icon to enter Stat mode and display the
statistical data lists. Use the
satistical data lists to input data and
perform statistical calculations. Use the arrows to move the
highlighting around the lists.

Exemple: Enter the following values in List 1

1st line enter 90 [EXE]

2nd line 85 [EXE]

3 79 [EXE]

4 75 [EXE]

5 70 [EXE]

6 68 [EXE]

7 56 [EXE]

When finished you press [F2:Calc], then [F1:1Var] and the statistical
results appear on screen.

Title of screen : 1-Variable

x bar =74.7142857

Capital Sigma x= 523

Capita Sigma X squared = 39851

x lower case sigma n = 10.5249945

x lower case sigma n-1= 11.3682934

n = 7

Scroll down with Down arrow to access other data

minX =56

Q1=68

Med =75

Q3=85

Xbar -x lower case sigma n =64.1892911

x bar + x lower case sigma n = 85.2392802

maxX=90

Mod=90

All you have to do now, is to look at the theory you learned and
interpret what these values mean.

PART B

- Once you enter your data [MENU][STAT],
- press [F1:Graph],
- select Gph1, Gph2, or Gph3.
- Once the graph of the experimental data is drawn, you will have access to the diverse regression models.
- Your choices are

- [X:Linear]
- [Med-Med],
- [Quadratic :X^2]
- [Cubic;X^3]
- [Quartic: X^2].
- Press [F6] to scroll right to access the others:
- [Logarithmic:LOG],
- [Exponential :EXP],
- [Power :Pwr] and
- [Sinusoidal:Sin]

- After you select a model and press [EXE], the screen displays the equation and its various coefficients.
- On that same screen, you have a menu option [F6:Draw].
- If you select it, the regression curve will be drawn on the same screen as your statistical graph.
- This allows you to judge if the fit is good. If it is not, you have the option to choose another model.
- The other option [F5:Copy] allows you to save the regression equation in the Y1, Y2, etc. variables.

Posted on Jul 25, 2010

SOURCE: How to calculate standard deviation

TO COMPUTE STANDARD DEVIATION AND 2-VAR STATISTICS.

I assume
you
know the theory. I will show you the key strokes

For
1-Var statistics

Press [MODE][3:STAT] [1:1-VAR].
You are ready to
enter values in the X column.

Enter a number and press [=]. Cursor
jumps to second number to enter.

Keep entering numbers and pressing
[=] till all numbers are in. Press the [=] key after the
last one.**Press
[AC] key to clear the screen.**

Press
[SHIFT] [STAT] (above digit 1.) then [5:Var]. Screen displays the
statistical variables 1:n ;2: x bar; 3: x sigma n; 4:x sigma n-1.

Press
the
number corresponding to the statistical value you want, ex 1:n . The
variable appears on screen. Press [=] and it will be displayed.

To
display another variable press [SHIFT][STAT][5:Var][ 1,2, 3, or 4] .

To access the sum of squares sigma x^2 and the sum of data sigma x
press[SHIFT][STAT][4:SUM] then [1: for sigma x^2] or [2: for sigma x].
Press [SHIFT][STAT][6:MinMax] to access minX and maxX.

For 2-var statistics

To
perform
2 variable statistics you press [MODE][3:STAT] and any of the
other regression options (except 1:1-Var). A two column template opens
where you enter the X and Y values. When finished entering data, press
[SHIFT][STAT][5:Var]. to access the different statistics. As I assumed
above, you should be able to
recognize what each variable means.

Posted on Nov 13, 2010

Follow the instructions beginning on page E-44 of the fx-115ES manual: http://support.casio.com/pdf/004/fx-115ES_991ES_E.pdf

Jun 15, 2013 | Casio FX-115ES Scientific Calculator

Follow the instructions under "Statistical Calculations" beginning on page E-44 of the manual. Examples 053 through 059 in the Appendix show an example (especially 057).

You may download the manual and the appendix from http://support.casio.com/manualfile.php?rgn=1&cid=004001004

You may download the manual and the appendix from http://support.casio.com/manualfile.php?rgn=1&cid=004001004

May 06, 2013 | Casio fx-115ES Plus Scientific Calculator

Calculate the population standard deviation and then square it.

Statistical calculations begin on page E-22 of the manual.

Statistical calculations begin on page E-22 of the manual.

Mar 15, 2012 | Casio FX570ES Scientific Calculator

Here are the capabilities of the Casio calculators.

The screen captures may not look like ones taken from the FX-7400G

plus display but the instructions are accurate.

In stat enter the values in List1 and the frequencies in List2**(if doing paired variable statistics)**

Press the key corresponding to the CALC tab

Press the 1-var tab and you get the results as seen on the screen with title 1-variable.

Other screens show some two-variable stats or regressions.

Use you knowledge of sample standard deviations and

population standard deviation to select which is relevant to your case.

They are given by xsigma-n and xSigma n-1

The screen captures may not look like ones taken from the FX-7400G

plus display but the instructions are accurate.

In stat enter the values in List1 and the frequencies in List2

Press the key corresponding to the CALC tab

Press the 1-var tab and you get the results as seen on the screen with title 1-variable.

Other screens show some two-variable stats or regressions.

Use you knowledge of sample standard deviations and

population standard deviation to select which is relevant to your case.

They are given by xsigma-n and xSigma n-1

Aug 15, 2011 | Casio FX-7400G Plus Calculator

The following is an example for the dataset {5,7,18}. This will generalize to any dataset that you would like to use.

- Enter your datapoints:

Press "5", "SIGMA+", "7", "SIGMA+", "1", "8", "SIGMA+" - Calculate the standard deviation

Press "2nd", "sigma_(x n-1)" - Square the standard deviation to get the varience:

Press "x^2"

If you followed the correct steps you should see "49" as your answer.

Mar 03, 2011 | Texas Instruments TI-30XA Calculator

- Calculator must be in SD mode (standard deviation mode) :Press [MODE] [.]
- However, if [FIX] or [SCI] appears on display you must press [MODE][9] first.
- Data input always starts with [SHIFT][SAC], to clear the registers of old data.
- Type a number and press the [DATA] key, it is the [M+] key at the bottom right of keypad.

Press [SHIFT] [9] (sigma n-1) to get sample standard deviation

Press [SHIFT][8] (sigma n] for the population standard deviation

Press [SHIFT] [7] (xbar) for the mean

Press [SHIFT] [6] (n) for the number of data entries

Press [SHIFT] [5] (capital sigma x) for the sum of values

Press [SHIFT] [4] (capital sigma x to y) for the sum of squares of the values

For additional information you might consider taking a look at the calculator manual

Apr 27, 2010 | Casio FX-260 Calculator

Hello,

I am happy that you found my solution helpful and even flattered that you copied it in this thread. By doing this, you gave me the opportunity to discover an error in my post. In fact, the calculator does provide a column for the frequency. If you enter nothing in the frequency column, all data items will have their frequency set to 1, by default.

Back to the current subject: How to get the variance (the square of the standard deviation).

When you finish entering your data:

While the symbol xSigma_n or xSigma_n-1 is still displayed with the blinking cursor to its right, press the [x^2] key above the [HYP] key. The screen displays say xSigma_n ^2. Press [=] to calculate the variance.

As my motto says, I am always happy to help, but happier still when people show true appreciation.

Hope it helps.

I am happy that you found my solution helpful and even flattered that you copied it in this thread. By doing this, you gave me the opportunity to discover an error in my post. In fact, the calculator does provide a column for the frequency. If you enter nothing in the frequency column, all data items will have their frequency set to 1, by default.

Back to the current subject: How to get the variance (the square of the standard deviation).

When you finish entering your data:

- Press the [AC] button to exit the data editor.
- Press [****][STAT].
- Press [5:Var] to open the statistical result selection screen.
- Press [3: xSigma_n] or [4:xSigma_n -1] depending on what you are interested in (population or sample) standard deviation.
- The screen echoes the symbol for the value selected (the value displayed on the bottom line may be 0 or an old value from a previous calculation: it is not the value you have just calculated).
- Press [=] to display the current value of the SD chosen.
- By doing this you are in fact storing it it answer memory.
- All you have to do now is to raise it to power 2 by pressing the [x^2] key ( the one above the [HYP] key).
- The calculator will display Ans^2.
- Press [=] to display the value of the variance.

While the symbol xSigma_n or xSigma_n-1 is still displayed with the blinking cursor to its right, press the [x^2] key above the [HYP] key. The screen displays say xSigma_n ^2. Press [=] to calculate the variance.

As my motto says, I am always happy to help, but happier still when people show true appreciation.

Hope it helps.

Dec 11, 2009 | Casio fx-300ES Calculator

http://www.geocities.com/calculatorhelp/casiofx300ms.htm

Mar 11, 2009 | Casio FX-300MS Calculator

standard deviation

calculate mean of a data set:

1. Turn calc. on or press MODE SeTUP

2.Press 3 for STAT

3. Press 1 for VAR

4.Enter values for X column

5. WHen done entering press SHIFT 1

6.Press 5

7.Press 2 to calculate the mean

8.Press =

calculate mean of a data set:

1. Turn calc. on or press MODE SeTUP

2.Press 3 for STAT

3. Press 1 for VAR

4.Enter values for X column

5. WHen done entering press SHIFT 1

6.Press 5

7.Press 2 to calculate the mean

8.Press =

Oct 05, 2008 | Casio FX-115ES Scientific Calculator

This calc will do standard deviations. In the manual it is on page 2 and also on page 40.

Sep 07, 2006 | Casio FX-7400G Plus Calculator

Feb 08, 2014 | Casio FX-250HC Calculator

Jan 29, 2014 | Casio FX-250HC Calculator

463 people viewed this question

Usually answered in minutes!

I have a fx 250d and want to know how to use it for standard deviation and variance. i don't have a manual.

how to use the caculator of standard deviation

How to calculate standard deviation, mean, variance?

×