Question about Sharp UX 108 Roll paper Thermal Fax

1 Answer

Memory full ux300

How do I remove full memory? thanks. greif

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 19 Answers
Re: memory full ux300

To clear memory(which i must warn will clear everthing) first press function then press the number 9,next press * (asterict) then press the number 8 then press the # key then 7 key, press start, you should see a ram version on screen,then press start again,next press # key untill it say's memory clear,press start and it should say memory clear.

Posted on Sep 24, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Copy from computer to Sharp ux300

The UX-300 is a fax/copier. It can send and receive faxes over a telephone line and it can make copies of paper documents. It is not designed to connect to a computer.
If you need a manual you may download a copy at

Apr 23, 2013 | Sharp UX 300 Plain Paper Thermal transfer...

1 Answer

Fax memory full message

Try unplugging the power cord for 30 seconds.

Mar 17, 2009 | Panasonic KX-FHD332 Plain Paper Thermal...

2 Answers


I can advise you on the 'memory full' problem, mate.

If you get a MEMORY FULL message while scanning the first page of a fax, press Stop to cancel the scan. If you get a MEMORY FULL message while scanning in a subsequent page, you’ll have the option to press Start to transmit the pages scanned
so far, or to press Stop to cancel the operation. In this case, send the fax by the Manual Transmission.
Depending on your typical faxes, MEMORY FULL errors can occur frequently. If this happens, change the Memory Transmission setting back to OFF.
To do this:

Press Function/Set, 3, 9.
This should take you to MEMORY TX
Then press either the left or the right arrow (< or >) to switch on or off, and press Function/Set.
For the next fax transmission only, press < or > to select
NEXT FAX ONLY and press Function/Set.

This will mean you don't add any more to the memory and may be able to send faxes. There is a possibility that you will only be able to fax using manual transmission, but at least you should be able to use the machine to fax at all!

I apologise if the jargon is confusing, just try to go through the process one step at a time and you should be fine.

Hope this helps :)

Chris (ziraffa)

Dec 13, 2008 | Brother IntelliFAX 560 Plain Paper Fax

1 Answer

UX-B800SE Fax

I had the same "Full Memory" problem & called Sharp. You need to unplug the fax, then hold (press down) on both the "Start/Memory" & the "Stop" buttons at the same time. While holding them down, plug the fax back in. After it's plugged in, you may need to press the start button again. That should clear it.

Aug 02, 2008 | Sharp UX-B800H Fax

1 Answer

Full memory

Hi Guys

Solution for L800 memory full

Open one touch cover press "Data Registration"
Press "Set"
Arrow to "TX Settings"
Press "Set"
Arrow to "Erase Failed TX"
Press "Set"
Arrow to "On"
Press "Set"
Then press the Orange stop key.

Good Luck
The Great Gordini

Jun 09, 2008 | Canon FAX-L800 Plain Paper Laser

2 Answers

Memory full

If your brother Intelli Fax 775 says..Memory full, erase message...this is what you do. Press "menu 84" then press the fax start button. Your fax will print every fax in memory and it will clear itself. To turn off the memory so this does not happen again..Press Menu then 82, then a up or down button, so it reads "off". Then the stop/exit button, and your done.

Jan 28, 2008 | Brother IntelliFAX 775 Plain Paper Thermal...

1 Answer


check where the paper comes out after a copy or fax, there is a lever ( sensor ) there, it is most likely stuck in the up position, it should be able to go down after each print. "output tray full means there is too much paper in the output bin you need to remove it before continuing to print.

Jan 24, 2008 | Canon LaserClass 2060P Plain Paper Fax

Not finding what you are looking for?
Sharp UX 108 Roll paper Thermal Fax Logo

Related Topics:

804 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sharp Fax Machines Experts


Level 3 Expert

1113 Answers

Norman  J Weimar Jr
Norman J Weimar Jr

Level 3 Expert

5693 Answers


Level 3 Expert

469 Answers

Are you a Sharp Fax Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides