My Hoover Duros S3590 on/off pedal doesn't work. I bought new switch on/off. How I can establish it myself.

Sorry we don’t have access to parts here

Anne, Do you mean that when you depress the pedal on the left side of the machine body that you can't get the upper portion to release into a lower mode? Or are you fully depressing the pedal?? As for the switch for the self propelled mode, that's actually just a small button that you move around in the slot of the handle to select which mode you want to use. It's not actually a switch. If you are fully depressing the handle release pedal and it's not releasing, you should take it to the store where you purchased it, if it was a vacuum store. If you bought it at a big box store, then you'll need to take it to some repair shop that does warranty work, if it's within the warranty period of course.

manual > http://hoover.com/file/682/
To reset the breaker:

(1) Push the ON/OFF switch
http://hoover.com/file/682/completely
down. You will feel some

resistance when the switch moves

downward. The switch will also move

slightly upward on its own.

(2) Wait one minute.

(3) Repeat step 1.

(4) Turn the cleaner ON and continue

cleaning.

If the brushes continue to stall and

the breaker trips again, clean the

brushes to remove debris. (Figs. 4-1

through 4-4)
To reset the breaker:(1) Push the ON/OFF switch
completely
down. You will feel someresistance when the switch movesdownward. The switch will also moveslightly upward on its own.(2) Wait one minute.(3) Repeat step 1.(4) Turn the cleaner ON and continuecleaning.If the brushes continue to stall andthe breaker trips again, clean thebrushes to remove debris. (Figs. 4-1through 4-4)

try this link below it may be some help to you
http://www.ereplacementparts.com/hoover-s3590-duros-legacy-vacuum-series-parts-c-37315_37445_37448.html

dont no wot you wont but here is the manual > http://hoover.com/file/396/

you must see any clogged from Hose, or nozzles, and clean, or repair.

Will be a good idea tha yur use user manual, or download from the Hoover.com and proceed according.

God bless you

I just had the same problem with my hoover duros, the vacuum was running fine but the powerhead kept going off. I would make a sweep with it and powerhead would be running and then next sweep powerhead would shut off. I had tried checking connection and belt, etc. I thought it was the powerhead. But then I found the problem. On the duros there are 2 pieces of wands that hook powerhead to hose on canister. They both connected and clicked in fine but I decided to check them separately. I hooked just one piece to hose and powerhead and then turned it on and then I did the other piece. ta-dah! that's what it was...it was only one section of the wand. When I hooked them up separately, one piece the powerhead worked totally fine and vacuumed like normal. When I removed that piece of wand and tried the second piece (actually the bottom section when both are hooked together) the powerhead did not work at all. So I just need to get a new section of wand. Hope this helps!

http://www.hoover.com/CustomerService/Manuals/Default.aspx Enter your model number on Hoover's website to view or print a manual. I suspect that you may have accidentally discarded the bag frame ( part # 93001544 ), which holds the bag in position.

The problem you are describing sounds like to be electrical in the cord reel. I would take it to a repair shop for estimate, sometimes these can be repaired rather than replaced. If under warranty, I would definitely take it in.

I’m happy to assist further over the phone at https://www.6ya.com/expert/robert_b96ba3f038cf317c

Hi Bobbie Take apart the electro floor head if you can and inspect inside - it may well be that there's clogged dust preventing the brush from turning and also check both sides of the actual beater bar as thread and tangled hair can often lead to a brush turning every so often.