Question about Office Equipment & Supplies

1 Answer

Monolta di 351 code cof32

The code cof32 is appearing on my display and I dont undestand it

pleaseI need any explication and solutions
tanks

Posted by on

  • Anonymous May 07, 2009

    j'ai un probleme:
    le code C0F32 s'affiche sur l'ecran de ma machine Minolta DI 620
    j'ai esaiyé de le resoudre en remplaçant le feur complet par un autre feur neuf mais pas de resultat, j'ai essaiyé ausssi avec le tembour mais pas de resultat aussi, j'ai essaiyé aussi avec le mode F8, le meme resultat...
    est ce que vous pouvez m'aider a resoudre ce probleme s.v.p
    merci beaucoup

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

  • Expert
  • 87 Answers

C0F32
there is a sensor in drum unit
open drum unit
pull drum out from unit
see at bottom there is a small sensor
it is dirty
having toner on it
clean it properly
check its cable also
problem will bi removed
never forget to rate solution
MAIN AKHLAQ

Posted on May 09, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My konica minolta bizhub 163 is displaying an error Code COF32, please i need a solution for it thanks.


Here is a link to the factory support site, it is the best I can offer on this, please contact them. index

Oct 17, 2016 | Konica Minolta Office Equipment & Supplies

2 Answers

Como reparar error cof32


Has the developer been replaced and the F8 function run and has the counter for the developer been reset. Also the drum should be replaced. at the same time. If this was already done did the person doing it use a vacuum cleaner to remove the old developer if so the Sensor for this code was destroyed by the static electricity from the vacuum cleaner never ever use a vacuum cleaner to remove old developer

Jan 28, 2014 | Minolta Di3510 All-In-One Laser Printer

1 Answer

Minlota Photocopier Di Alta Di 351 Broblem code CO510 COULD YOU PLEASE ADVISE ME WHAT IS THE PROBLEM WITH MY PHOTO COPIER AND WHAT COULD BE THE SOLUTION


Hello the problem you have with error code c0510 is caused by the fuser unit the best thing to do is to replace the fuser unit also make sure you have the most up to date firmware installed on the machine

Feb 02, 2011 | Konica Minolta Office Equipment & Supplies

1 Answer

Our copier is showing error code cof32


Sir,
Your image unit my have a problems has it been replaced recently, the starter my need replacing. What model is it BizHub, Di or EP? IF it is EP model then open and close front door to reset, if Bizhub or Di model turn on and off machine wait at least ten between on and off. If these dont work then starter/developer needs replacing and or ATDC sensor needs replacing

Feb 27, 2010 | Minolta DI-2010F Copier

1 Answer

Code cof32


ATDC (Automatic Toner Density Control)sensore malfunction.Enter in the service mode and check the ATDC gain value 153 to 164.If your specify the copier models Minolta Di or EP ? I can help you.

Sep 13, 2009 | Minolta Office Equipment & Supplies

1 Answer

Fixing code cof32


The excess toner is under cleaning blade.Posible you emptied the developer.COF 32 ATDC sensor malfunctions.Tray ATDC gain level from 155 to 168.

Apr 22, 2009 | Minolta Office Equipment & Supplies

1 Answer

My Monolta Dynax 5D judders on startup, then the shake reduction display flashes then it wont take pictures or turn off. It just shows br1 in viewfinder display


It would appear from other sites and users that the anti-shake mech has failed and the cost to repair outweighs the value so I will stick with my SonyA700, sell the lenses and filters I dont need and scrap the body. Thanks for the reply.

Aug 07, 2008 | Konica Minolta Dynax 5D / Maxxum 5D...

3 Answers

Code cof32


I removed Drum Unit, emptied excess toner, cleaned and installed. After short start-up code cof32 appeared.

Nov 05, 2007 | Minolta Office Equipment & Supplies

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

879 people viewed this question

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

k24674

Level 3 Expert

7993 Answers

yadayada
yadayada

Level 3 Expert

74945 Answers

Are you an Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...