Syncing of palm times out

All you need to operate it on windows 7 is the active sync application for the 64 bit system which is available here: Windows Microsoft Activesync Application

try syncing it with the cable provided with the handset using palm hotsync Manager..

its because of the battery or it cant bare that

Treo 650 can't be synced to Vista 64 via the cable, but Bluetooth works OK. Details later (I hope).

Try uninstalling the Microsoft Activesync. The Palm website offers the newly, innovated Activesync software available for your device. I would recommend reinstalling Microsoft Activesync from this support site.

Based on the things that you have said the first suggestion that i could give is to try another computer install the program and see if it will sync with the Treo. That will help you isolate the probelm.

I just reset it and it work. You can reset it by taking the battery out for a couple of mins, put it back in and it should work just fine.

Older palm products and vista aren't compatible. You either needs to transfer info via bluetooth or upgrade your palm if you wish to continue using vista.

Assuming you are running Palm OS and not one of the rare beta Windows Mobile versions, here is my take on this.

Are you using a USB or Serial Sync cable? With either solution, make sure that the setting on the Palm Desktop Hotsync Manager is set to the correct setting (either USB, Serial, IR, etc). Conflicts between the cable type and the settings on your PC are common.

I prefer using USB cables since they are faster and you can tell if you are connected quicker than with a serial cable. Initiate the sync via your phone or the Palm Desktop Manager software. I have had faulty cable sync buttons and this was a good solution for me. If you haven't tried a new sync cable, you might want to.

Actually if you have time and a laptop, you can take your Treo to a Palm store and borrow one of their cables to try and sync. They were really helpful whenever I went in there.

Good luck.

Try reseting the palm.