Question about Televison & Video

1 Answer

Control of vertical TV image projected on the screen

SONY Trinitron multisystem KV2566MW 24 inch The vertical image projected on the screen exceeds the top and bottom of the screen by about 10% so I miss any information which scrolls across the bottom of the screen. Can not find any button on the TV or the remote control which allow me to adjust the vertical setting of the image projected on the screen. No problem with horizontal projection.

Posted by on

  • barent Apr 22, 2009

    the remote does not have any of the suggested function buttons

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 48 Answers

You can try looking for 2 things

1. A button on your remote that says either: ARC, Ratio, 16:9, 4:3.... Some remotes have a picture of a square with arrows pointing out towards each corner..... I'm unfamiliar with this set, but it sounds like a widescreen, so give it a go

Posted on Apr 22, 2009

  • MRL85 Apr 22, 2009

    It could be a setting in the manual, or your vertical deflection circuit may be faulty

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Red light flashing 4 times


sounds like it's toast http://community.sony.com/t5/Television-Picture-Sound/Vertical-Lines-of-death-KDL-52W4100/td-p/29582

Mar 26, 2014 | Sony KD-27FS170 27-Inch FD Trinitron WEGA...

1 Answer

Cross lines ontop of screen my G21 M1 tv.. pls tell me how to solve it


The vertical output section of your TV has the fault. Replace all the electrolytic capacitors there, including smoothing capacitor to supply line to IC. Check for any loose solder termianls too. The lines you are seing across the screen, on it tope side, about 2 inches might be due to this fault, and are technically called [vertical retrace lines].

Apr 26, 2012 | Sony FD Trinitron WEGA KV-24FS120 24" TV

1 Answer

Sony lcd projection tv vertical adjustment KF-50E200A


Try changing the settings for the video formats, widescreen, regular, and all that. There are angle mirrors in the back of the tv that direct the projected image on the screen. The mirrors are positioned such that if, says, a piece of a metal bracket or something falls down inside the projection area, it'll fall right against the projection lens and block the image. Open up the back of the tv and follow the light path from the screen backwards to its source and make sure there's no debris in the projection path.

Sep 17, 2009 | Sony KF50E200 TV

1 Answer

Green line running vertically along the edge of picture


If its a LCD projection TV (such as Sony Wega, Hitachi, Epson, Philips, and some Panasonic, some Mitsubishi), and the green image is in the whole screen or just one part as a blob or a line. Is most probably that one of your LCD Color Filters is damaged (burned out or starting to get busted), I don’t know if you can just replace the color filter, I believe you need to change the whole light engine system or the optical block. There are some places around, I found some on ebay but you should definitely try on discountdashmerchantdotcom their price range $260.00 - $330.00

Jun 25, 2009 | Sony Grand WEGA KDF-42WE655 42" Rear...

1 Answer

PS2 not working properly on a Sony Trinitron KV-25DA65 (japanese)


the vertical has a problem, check the following
capacitors near the the verticle ic especially eletrolitic capacitors
and resistor they may have changed values

what is happening is that voltage is not consistant.

Feb 28, 2009 | Sony FD Trinitron WEGA KV-24FS120 24" TV

1 Answer

32 inch sony wega flat screen but not a lcd


try to check horinzontal output. and vertical ic.

Jan 11, 2008 | Sony FD Trinitron WEGA KV-24FS120 24" TV

1 Answer

Black Screen with vertical lines down the side?


· http://esupport.sony.com/perl/news-item.pl?news_id=24
· Which models are affected with the "flicker" problem?
A1: There are 12 models in total: KDP57XBR2, KDP65XBR2, KP46WT500, KP51HW40, KP51WS500, KP57HW40, KP57WS500, KP57WV600, KP57WV700, KP65WS500, KP65WV600 and KP65WV700.

Jan 03, 2008 | Sony KP-57HW40 57" Rear Projection...

2 Answers

Where is the vertical control??


ok well their in so pot if that is what you are looking for most off the times in these sets the problem is bad solder connections maybe a bad cap or two look at the board carefully and tell me what you see the vertical ic is labeled on the component side get back to me

Nov 05, 2007 | Sony FD Trinitron WEGA KV-24FS120 24" TV

1 Answer

Sony Trinitron Flat Screen 15" TV - Sound not working, image pauses every 5 seconds


Sounds like a DVD player issue. The TV is all analog and can't replicate issues like that.

Jan 28, 2007 | Sony FD Trinitron WEGA KV-24FS120 24" TV

1 Answer

I have trinitron Sony Television.. i got some problem with my TV, the Vertical screen size gone out of focus... I want to know about remote control Commander Codes from which i can resolve my problem and...


I think what your asking is for an on screen service menu?? That wont fix your problem. It sounds like you have a vertical height problem where the screen doesnt fill the entire screen with the Picture. The adjustments wont go out like that for no reason and all by them selfs. The vertical sweep IC went bad and is going to have to be replaced. This is not a job for the end user. You should call an experienced tech to assist you with this repair. Good Luck

Aug 12, 2006 | Sony FD Trinitron WEGA KV-20FS120 20" TV

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

133 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74185 Answers

Cindy Wells

Level 3 Expert

5124 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...