Question about LG WD-16115FD Front Load Washer

2 Answers

Lg 801 3f washing machine. 15 seconds after selecting any cycle a

15 seconds after selecting any cycle
all Spin,Temp& Option lights flash and the machine won''t
work. The filters are clean, water supply ok. water pump ok, drum motor belt ok.No obvious
obstructions.

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I had the same problem. Redistributing the clothes inside the machine seems to do the trick. Even though the clothes seemed evenly distributed and I had far less than maximum capacity in the machine- it seemed to think that something was out of sync- simply moving the clothes around did the trick!

Posted on Oct 05, 2009

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 2 Answers

I had a similar problem i unplugged the machine and left it stand for 8 hours .. it works ok..

Posted on Apr 30, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My lg wd-80134t does not spin


Try pressing the "Temp" and "Option" buttons simultaneously for 3 seconds, check if the machine will start, if not unplug the mains supply for a couple of minutes, replug and check whether all the buttons are working and that it will start.

Jun 04, 2015 | LG Washing Machines

1 Answer

HE3 doesn't respond to any button. Time light keeps flashing time. Pause cancel button does nothing, Cycle doesn't start. The only thing that will change is if you push a different mode ie, heavy,...


Unplug the machine for at least half an hour to eliminate the possibility of an electronic glitch. Then upon plugging in back, close the door then push CONTROL/ON (if present on this model). Select the DRAIN/SPIN cycle then select NO SPIN by pressing the SPIN SPEED button. Push PREWASH OPTION four times within five seconds. If PREWASH OPTION is not present on this model, press EXTRA RINSE four times within five seconds. C:00 will light up on the display. If the Starting procedure fails, push the PAUSE/CANCEL button then repeat the starting procedure.

In order to advance to the next step of the test procedure, push PREWASH OPTION button two times. If PREWASH OPTION is not present on this model, press EXTRA RINSE two times. The test program goes from C:00 to C:08 and should flash an error code when a problem is present. Post the code back for further troubleshooting, including the exact model number of the machine.

Sep 20, 2011 | Kenmore 3.8 cu. ft. HE3 Front Load Washer

1 Answer

Lost manuel an forgot how to run cleaning mode on duet front load model#ghw9150pw4


1) turn to rinse/spin option on dial
2) select low spin speed button
3) select warm/cold temp
4) set end of cycle signal to softer
(you will notice all the lights light up in a row, that is how I remember)
5) Press the extra rince button 4 times within 5 seconds.

The bleach you add is either 1 cup if you haven't done this in a while and then 1/3 monthly


Hope that helps!

Jan 04, 2011 | Whirlpool Duet GHW9150P Front Load Washer

2 Answers

The machine will start a cycle normally, but after the timer reaches a certain point it stops counting down and the machine will continue to agitate until you force it to stop.


Thank you for verifying the model type so many folks post non FAV6800A/FAV9800A questions in this forum machine specific topic area.

FAV6800A/FAV9800A Service Manual for reference. Sears Parts Direct for reference.

You will need the Service Manual for support. I’m an owner like you with a solid repair skills on the machine and will try to help you DIY the repair if we can ID the issue through troubleshooting.

Do you have this condition in all wash cycles? Will a Quick Wash cycle complete? Do you see the Cycle Status LED ever indicate the machine has moved to the Spin Cycle during the wash cycle? This could be a Control Board failure but we need to troubleshoot.

I want to make sure the Wash basket will spin up with a Spin Only cycle selection. Can you select a Spin Only cycle with a empty wash basket. I would release the washer top so you can observe this test. I want to rule out a broken Clutch large wrap spring.

Page 33 of the Service Manual will show you how to release the washer top from the base. In Spin Only cycle raise the top just enough to make sure the wash basket is rotating Counter Clock Wise – CCW with the Spin Only cycle selected and operated.

If the above test doesn’t indicate an issue I would like you to try the Quick Service Cycle test on page 15 of the Service Manual and see if your FAV6800A will pass that test with no clothes in the washer. When you put the machine in Service Mode press and hold simultaneously the Enviro Plus and Spin Only keys until the machine beeps and the LED display reads 00. Then press Wash/Rinse Temp to start Quick Service Cycle test. Did the test complete with a PA indication in the display? It will only display the PA code for a few seconds. End of cycle will beep washer will unlock and Cycle Status LED will indicate complete.

Waiting for your reply….Rich

Dec 24, 2009 | Maytag Neptune FAV6800AW Top Load Washer

1 Answer

When I start my LG WM2101HW washer, the spin light


sounds like a clitch under warrenty would call them out so you dont void warwrnty

Dec 06, 2009 | Washing Machines

1 Answer

Washing machine - LG TROMM - door is not opening


Try buttons "dry" & "spin" together for a few seconds. This is the child lock display.

Or press "end of cycle" for over 3 seconds.

Or press "options & select" till the light goes off.

Works for other machines..............I'll be back with a further post

Mar 30, 2009 | LG TROMM WM2688H 4.0 cu.ft. Front Loading...

1 Answer

Spin cycle error - UNB


Haier have had one or two problems with there spin,
option 1 make sure the machine is balanced perfect [no rocking at all ] use a level on the machine [ truly ] it works.
option 2 you can not wash one item [ underload the machine or overload the machine this will give same result UNB .
option 3 if you have had the machine a few months and this has just started [ clean the armature on the motor with emery cloth and a quick spray of W D 40 please plug out the machine first
0161 355 8254 if you need help , good luck

Feb 17, 2009 | Haier HWD1000

Not finding what you are looking for?
LG WD-16115FD Front Load Washer Logo

423 people viewed this question

Ask a Question

Usually answered in minutes!

Top LG Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1456 Answers

yadayada
yadayada

Level 3 Expert

75117 Answers

Are you a LG Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...