Question about Zenith P42W34P 42 in. EDTV-Ready Plasma Television

1 Answer

My LG50PY2DR lost video, but the audio is OK

While watching the TV I heard a pop then the picture went out, but the audio was fine. I was told by a friend that either ZSUS or the YSUS board needs to be replaced, how can I figure out which one needs to be replaced.

Posted by on

  • Sudarshan Biligiri Apr 23, 2009

    I saw 2 fuses on the X_SUS board, I checked both the fuses using a multi meter, both are OK, but I do not see any fuse on the Z_SUS.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 48 Answers

There are fuses on each board, they're ceramic, so you will not be able to see if they are blown physically, you will need a multimeter. Only one is normally blown, that will be the board you will need to replace

Posted on Apr 22, 2009

  • MRL85 Apr 24, 2009

    You need to check the Y-Sustain (Looking from the back, its the board on the left, connected to the upper/lower scan PCB's), the fuse should be close to where the power supply is plugged into.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Had a loud snap when watching then no power.


TV repair, clicking and will not power on, loud snap, no ...

? 13:57
https://www.youtube.com/watch?v=UKoR7pWAHzk
Nov 25, 2014 - Uploaded by Robert DIY
TV Power board replacement - 30 - 60 minutes ($20 / $110 / $250 / Replacement) This video will show you ...

Samsung LCD 46 Pop! Then Dead! - TV Forums

www.tv-forums.com/...Repair.../Samsung_LCD_46_Pop!_Then_Dead!_...

Nov 23, 2011 - 7 posts - ‎3 authors
While watching TV, I heard a loud pop, then the tv went dead. ... Ok, so I tested the fuses and the main fuse, by the power plug, had no ...

Samsung power defect causes some TVs to fail, and a class ...

www.cnet.com > Home Entertainment

CNETFeb 14, 2012 - A defective capacitor in some Samsung LCD, plasma and DLP TVs is causing the ... The LN-S4051D is one of the TVs Samsung admits has issues ... In a February 9 report entitled "More than 7 million Samsung TVs plagued by possiblepower defect", ..... Today I heard a loud pop and now I have no picture.

Feb 09, 2016 | Samsung Televison & Video

1 Answer

Sound but no picture,black screen hitachi#50GX30B Was watching Tv then I think I heard a little pop and no picture just sound


hi voltage transformer went need a professional to fix unless you can get parts and solder it in

Mar 27, 2014 | Hitachi 57F710 TV

1 Answer

Tv picture went out


Sorry bad news these TV's work off of lights that shine thru the back of the screen if you heard a pop it was the power board that turns on those lights not an easy fix sorry.

Jan 28, 2013 | Samsung LN40D550K1FXZA - LN40D550 40 1080p...

1 Answer

Viewsonic N3252W picture ok but no sound


Download the repair book to this TV by net. It will have all details.

May 23, 2012 | ViewSonic N3252w 32 in. LCD Television

1 Answer

42 inch LG Plasma TV - Lost picture


If you paid by cheque or credit card, that is your proof of purchase.

Mar 09, 2017 | LG 50PG6000 50 in. HD-Ready Plasma TV

1 Answer

Picture went out on TV


you need to change the sustainer boards and TV will be good as new.

Apr 05, 2009 | V, Inc. Vizio P4 Plasma Television

2 Answers

42 inch LG Plasma TV - Lost picture


Most likely what happened is one of the capacitors went bad. When a capacitors goes bad it produces a popping sound. This could be an easy and cheap fix if you find the bad capacitor or capacitors. The bad capacitor will have a bulging top most likely on the power board but could be anywhere.

Feb 24, 2009 | LG 42LC3R 42 in. LCD TV

1 Answer

Whistle noise? POP? Black out


sounds like the lamp has shattered. check the lamp

May 18, 2008 | Samsung HLN5065W 50" Rear Projection...

1 Answer

42 inch LG Plasma TV - Lost picture


ysus pcb that supplies voltage to the panel is faulty

Dec 14, 2007 | LG 42PX4DV 42 in. EDTV-Ready Plasma...

Not finding what you are looking for?
Zenith P42W34P 42 in. EDTV-Ready Plasma Television Logo

Related Topics:

290 people viewed this question

Ask a Question

Usually answered in minutes!

Top Zenith Televison & Video Experts

The Knight
The Knight

Level 3 Expert

73591 Answers

matt martin
matt martin

Level 3 Expert

1208 Answers

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

Are you a Zenith Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...