Question about Husqvarna Sewing Machines

1 Answer

Bobbin sewing loose

Boobin is sewing loose and bunching up...it has been working fine until this started just use straight sewing stitch nothing fancy at all

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 374 Answers

Hi there,
there is a problem on tension adjustment and setting of stitch
try to learn on actual video how to set thread and sewing, log on www.youtube.com on search box type Husqvarna sewing machine
and theres a lot more tricks on sewing.have a nice day don't forget to rate me. thank's

Posted on Apr 22, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

The stiches become loose after few seconds after i start sewing


I had a problem similar to this-- when sewing, tons of thread was bunching and looping out of the stitches instead of a nice neat stitch. I finally figured out that this old metal bobbin I put in was incompatible. I switched to a plastic bobbin (the kind like that which came with the sewing machine) and the stitches looked fine.

May 21, 2014 | Yamata FY812 Mechanical Sewing Machine

1 Answer

Boobin winder isn't working correctly


Needs to be in the tensioner as it winds on or will be loose

Mar 20, 2014 | Singer 1725

1 Answer

Trouble shooting


its the tensioner knob turn it a little bit till the stitch is back to the way its suppose\ed to be, don't turn the knob a lot ust a hair a little AT a time try the stitch each time you turn it to see if the stich is tight again. The knob has numbers on it you have to d this in straight stich setting

Apr 28, 2017 | Sew D'Lite Lightweight Portable Mechanical...

1 Answer

Bernina activa 210 won't zigzag and has bobbin issues on straight stitch


it's very possible that the machine is slightly out of time & needs to be service at a sewing machine shop
is the fabric & thread & needle compatable with each other?
did you use every thread guide when threading the machine?
is the bobbin in correctly?
is the bobbin warped?

Mar 20, 2012 | Bernina Sewing Machines

1 Answer

I have an older New Home Sewing machine XR-V11 electronic I have figured out the threading, bobbin, regular stitching and back stitching. It has alot of fancy stitching on it I can get the dial to move to...


It does not matter what pattern you select, if you have the stitch width dial on 0 or set on straight stitch then that is all it will do, to do patterns you need a close stitch length about 2 or if it is not numbered get the stitches close to suit yourself and the stitch width on the widest number.

Mar 06, 2010 | New Home HF-2022

1 Answer

Sewing a bunch of thread from the bottom, this stops the machine from actually sewing


Yes, it does. There are a couple of reasons the bobbin thread could be bunching up on the underside of the fabric. It could simply be that the machine needs cleaning. Take the bobbin assembly out, brush all the old lint out as best you can, reoil the machine once it's all clean, and make sure there aren't any little bits of thread caught in the bobbin assembly. Rethread the machine (carefully) and change the needle. This solves the problem usually--especially if the machine was sewing along fine and the problem develops suddenly. '
The other thing to check is your tension. It could be that the top tension is too loose. But different color thread in the top and in the bobbin, stitch a few inches (be sure to held the top and bobbin thread ends behind your needle as you start to stitch) and check. WIth the pressure foot down, adjust the tension, and stitch again. Keep stitching, checking, and adjusting until you see little if any bobbin thread on the top or top thread on the bobbin.
Another thing to reminder: use the appropriate thread and needle for the fabric you're sewing.
Let me know if this works, ok?

Robbie

Jan 31, 2010 | Elna Sewing Machines

1 Answer

My new sewing machine, just opened to use, is bunching thread on the underneath or bobbin side when I attempt to straight stitch. What is causing this to happen. Thanks.


re thread the top and bobbin threads

after pulling up the bobbin thread pull both threads to the back and hol them when stitching the first few stitches

with out holing the threads the machine will pull the thread into the machine and bunch the thread

Aug 24, 2009 | Kenmore Sewing Machines

1 Answer

The bobbin thread is bunching on the under side of the fabric,. Decorative designs are close together, not like the pattern and when I use the more intricate decorative designs, they just sit in a quarter...


Make sure that you use the F foot when using decorative stitches.

The stitch balance my be off. Remove the accessory bin and you will see a large plastic screw with a + and a - and an arrow. Using a coin, turn the arrow to the center and test. Turn the arrow towards the + to stretch the pattern out.

If this doesn't work, it must me calibrated internally and requires an experience hand.

Jul 07, 2009 | Janome Memory Craft 9000 Computerized...

1 Answer

Bottom of stitch is bunched with alot of thread and machine jams


Try these time savers:
Test your thread quality to start, thread your machine and LIFT the presser foot (this opens the tension disks). Pull your top thread straight back. If you feel no tension no mater how much thread you pull, your thread is good. If that your machine passes that test, then let me know, we can go to step 2. If not, try different spool of thread, same test until you get a smooth pull (tip: always check your thread this way when you thread your machine)
Step 2:
Pull on your threaded bobbin thread while it’s in the machine. Does it pull smooth and even? If so, go to step 3. If not, try a new bobbin (bobbins get bent or distorted if wound too tight).
Clean thoroughly in the hook and bobbin case area and oil 1-2 drop is all.

Mar 17, 2009 | Singer 3116 Simple

1 Answer

Brother LS2020 Unable to sew because bobbin locks up


Okay I think i can help- i have mastered the lower bobbin threading after 4 hours and am now trying to sew but thread keeps bunching up. Anyway you have to line finger of boobin in the top notch, this will keep your bobbin from getting stuck. Hope i helped Lesnbek

Jan 13, 2009 | Brother LS2020 Sewing Machine

Not finding what you are looking for?
Sewing Machines Logo

Related Topics:

138 people viewed this question

Ask a Question

Usually answered in minutes!

Top Husqvarna Sewing Machines Experts

Douglas Plant
Douglas Plant

Level 2 Expert

179 Answers

Tally Girl
Tally Girl

Level 3 Expert

1122 Answers

Derek Massey

Level 2 Expert

92 Answers

Are you a Husqvarna Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...