Question about Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Mod WFW 8400tw00 the bearing on the drum is out and the drum

Would not turn.I took the back off and removed the snap ring but could not figure out how to remove the bearing . The bolt holding the pully on seems to be stripped since I had a hard time removing it. Is the bearing covered under warranty and do I need a special tool to remove and install it. Thanks for your help.

Posted by on

  • lockemuprob Apr 23, 2009

    Mine wore a groove in the front half of the outer drum.
    To change that bearing you speak of, you must replace the rear half of the outer drum and it is $400 for the part.http://www.appliancepartspros.com/Applia... Mine will need both halves... http://www.appliancepartspros.com/Applia...
    This thing didn't even last nearly as long as an old Kenmore top load washer.

  • lockemuprob Apr 23, 2009

    Mine wore a groove in the front half of the outer drum.
    To change that bearing you speak of, you must replace the rear half of the outer drum and it is $400 for the part.http://www.appliancepartspros.com/Applia... Mine will need both halves... http://www.appliancepartspros.com/Applia...
    This thing didn't even last nearly as long as an old Kenmore top load washer.

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Http://www.appliancepartspros.com/Appliance-Parts/WHIRLPOOL-Outer-tub-item-number-AP3773839.aspx

Bearing NOTsold separately...

Posted on Apr 23, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do I change rear wheel bearing on 2009 k12 nissan micra


That should be in the service manual: You can search for one using Google and this in the search box: "2009 k12 nissan micra service manual" without the quotes, it should show a lot of different sources for one.

Nov 28, 2014 | Nissan Cars & Trucks

1 Answer

How do you remove the upper wheel on a craftsman 12 inch bandsaw


Check with bandsawmanuals.com if they have the manual for your band saw. You might want to try these steps. First, you need to unplug the saw and remove the band. Then remove the outside snap ring.
I am not sure but you might have to remove the self locking screw in the shaft.
Once the snap ring is removed, you should be able to remove the wheel and the outer bearing.
Then remove the back bearing from the shaft. Next, install the bearings in the reverse order.

Aug 29, 2014 | Craftsman 113.243300 & 113.243311 12" Band...

1 Answer

My model MAH5500BWW Neptune does not have a snap ring on the back drum bearing. Is that a problem?


You have the same washer and issue I have it's a compression fit bearing and will require the "tony tool" to remove and install

Jan 04, 2013 | Maytag Washing Machines

2 Answers

I have a Maytag front load Mod. # MFW9600SQ1 and It is making a grinding sound when the drum is rotating. I took off the back and belt to see if it was the motor but it is still making the sound. Is...


Is it making the noise with the belt removed ?? If so it is the pump has an obstruction in it most likely. As for the bearing it is not an easy job . The whole drum assembly must be removed from the case and separated.

Dec 07, 2010 | Maytag EPIC MFW9600S

1 Answer

Hotpoint dryer dlb155obdlad will not turn. just replaced the belt.


first check to see if you can manually turn the drum ..then go to back of dryer in the center their is a cover plate...remove 2 screws to see the drum shaft ...remove the snap ring to remove the 2metal washers..and 1 fiber washer ..their should be a fiber sleave/bearing that slides onto the shaft that is in a metal bracket ...this is the rear support for the drum ..its prob.. out of bracket an grinding a big er hole ///or the front of the dryer drum slides are bad ..if you did the belt they are on top of the front panel of the dryer door they are plastic slides ..the inside of the drum has to be ontop of them to rotate ....let me know an good luck.../joe/

Aug 30, 2010 | Hotpoint NLL113EYWO Electric Dryer

1 Answer

How do you take the inner drum out of a Frigidaire front loading washer?


Make sure you have plenty of well-lit space to work as well as lay out the parts removed. Remove the cabinet top by removing several screws from the rear, slide it back somewhat, then lift up. Remove the back panel by removing screws along the top rear, then lift up. Pull loose the rubber boot (it's glued to the cabinet front opening as well as to the outer drum face) CAREFULLY from the front panel opening. After uncoupling the drum motor, wiring, hoses, and suspension components, lift out the entire outer drum assembly. The case splits after removing a handful of bolts from the split circumference. Remove the large drum pulley and any snap-rings holding the large shaft in place. The inner drum should pull out of the rear case, but leave the bearings and seal in the case. The inner bearing and seal are prone to failure over time. The official fix is to replace the rear case (with new seal and bearings) for some 300 to 400 dollars. We chose to replace the bearing and seal from a local bearing supply house for about $16. It's still working well after over 10 years. Assemble in reverse order. Use 3M automotive trim cement for gluing the rubber boot back to the cabinet front. Hope this helps!

Jul 25, 2010 | Frigidaire GLTF1670A Front Load Washer

1 Answer

The container that bakes the bread has a tab on the bottom that turns, and is on a shaft that goes thru the bottom, and this shaft is held by a snap-ring. we can't get the tab off,(supposed to come off to...


Hi,
Thank you for visiting Fixya. The tab you speak of is called the paddle. The paddle sits on a shaft that is pressed into a sealed bearing. This shaft is not supposed to move in the bearing. If the shaft moves the bearing will lose it's seal and lubricating fluid (oil) will leak out. The snap ring, bearing, and shaft are put together before they are installed into the pan. If you can't fit the ring back onto the shaft so the shaft doesn't move, then you should hunt around for a new bread pan. P.S. Putting soapy warm water in the pan and letting it sit for a while will free up the paddle so it lifts off the shaft. Also lubricating the shaft with a squirt of olive oil will help stop the paddle from sticking on the shaft. Good Luck...Hank

Nov 28, 2009 | Zojirushi Kitchen Appliances - Others

1 Answer

MOD T700 ASKO DRYER REPLACED DRUM ROLLERS PUT BACK TOGETHER WILL NOT TURN ON


When I took the back off my Asko to clean it out I had to lay it on its face to get the drum to line up again with the back - in the doing this a wire pulled off its setting. Did not figure this out until I took the top off the dryer and found the loose wire. I have no idea if this is your problem but it was very frustrating. There is also a black reset button on the back of the dryer that you might try.

Jun 15, 2009 | Asko T701 Electric Dryer

Not finding what you are looking for?
Whirlpool Duet GHW9150P Front Load Washer Logo

172 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Sal DeAngelo

Level 3 Expert

2341 Answers

yadayada
yadayada

Level 3 Expert

76848 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...