Question about RCA HD52W58 52" TV

3 Answers

Turn tv on stays on for up to ten minutes then shuts off,

This set is 5 years old rca 52", worked great till this afternoon. cleaned front, vacumed set front and back. stayed on a little longer then went back to the 10 minute shut off. thanks ken

Posted by on

3 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Turn off the timer

Posted on Apr 22, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • RCA Master
  • 3,866 Answers

Its either the timer or it could be a sleep timer or alarm. got to the menu settings of the TV - go to timers/sleep times and turn it off

Posted on Apr 22, 2009

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 8 Answers

Im not a big tv knowledge man but i think its either that youer magnet in your tv has gone, you can buy another magnet for your tv, i dont know but i think its either your magnet or a fault with your power supply.

Posted on Apr 22, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ignition / start problem


Check the wire to your starter. Chect the battery connections. Check alternator connections. Clean them all and apply a little grease to each. Not so bad in central FL today either, supposed to be mid 60's.

Feb 19, 2010 | GMC C1500 Cars & Trucks

1 Answer

Lines across tv


try cleaning T-CON Board to Lcd panel cable

Jul 23, 2009 | Sony BRAVIA KDL-52W3000 52 in. LCD...

1 Answer

Rca r52wh74 - no auto convergance


Go to menu then setup look for convergence if it is missing on menu then you have a open FUSE/ FL231, But if you have convergence on menu then go into service mode turnTV off then PRESS and hold at same time ch- and vol- wait for set to come on then release TV should now be in Factory settings.

Feb 20, 2009 | RCA D52W23 52" HDTV CRT TV

1 Answer

On off switch


clean front panel contact switches on/off vol- vol+ use contact cleaner .

Dec 03, 2008 | RCA D52W19 52" Rear Projection Television

1 Answer

12 YEAR OLD RCA PROJECTION


Need NTE replacement for CR4106 in the 20 volt standby circuit

Jun 03, 2008 | RCA Televison & Video

5 Answers

Rca r52wh74 - no auto convergance


On this particular model when your convergence is out of alignment, and the auto convergence is suddenly missing from the TV's menu all together, there is a easy fix.

Diode on Main Power supply, Location dl321 and fuse at Location fl231.

This problem has a high failure rate.

Jan 10, 2008 | RCA D52W20 52" Rear Projection HDTV-Ready...

1 Answer

RCA 52" second time in the shop in less than one year, won't stay on, green light flashes 3 times then goes out


try changing the cap 150 on the same board as flyback transformer this should help with the tv not staying on.

Jan 09, 2008 | RCA D52W20 52" Rear Projection HDTV-Ready...

1 Answer

Crazy menu, comes on periodically without using remote


believe it or noT: try replacing all of the switches on the control panel (((power button switch,menu button switch, etc...)))

Oct 27, 2006 | RCA HD52W56 52" Rear Projection HDTV

1 Answer

Rca 52' projection convergence problem


Its a good possibility that your convergence problem could for now be cold solder connections on the driver ICs on the convergence board. The longer you use it the more of a problem its going to surge those ICs till they go bad and maybe cause other componet falure as well. If your not a technician i would have this set serviced asap before it becomes a major repair Good Luck

May 22, 2006 | RCA P52926 52" Rear Projection Television

Not finding what you are looking for?
RCA HD52W58 52" TV Logo

Related Topics:

141 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Televison & Video Experts

The Knight
The Knight

Level 3 Expert

73698 Answers

matt martin
matt martin

Level 3 Expert

1208 Answers

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

Are you a RCA Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...