Speed control connection k56flex

96000

What does your ISP provide? Usually the ISP cable company will set one up that you connect to, or, take a look at these: http://www.tigerdirect.com/applications/category/category_slc.asp?CatId=160&srkey=cable%20modems

Connect ISP modem to main RJ45 connection. Them simply connect PC to any other port. Wireless network connection requires discovery of your network from device(s).

Unplug router for a minute or so and re connect also check if the computer is even recognizing the router in control panel under network conections

Yes you can use the laptop with this router because this is a wireless router.

Details of the router are:-

Manufacturer: 2wire Product MPN MPN 1000-400108-001 Key Features Router Functionalities Wireless Access Point • DSL Modem • Firewall • DHCP Server Connectivity Wireless Interfaces Built-In 4-port Built-In Switch LAN Interfaces 10/100 Base-T Additional Interfaces 1 x USB Standards and Protocols LAN Standards IEEE 802.3 CSMA/CD or Ethernet • IEEE 802.3u 100 Mbps (Fast Ethernet) Protocols AAL5 • ARP • ATM • DHCP • ICMP • IP • PPPoA • PPPoE • TCP • UDP Remote Management Protocol SNMP • HTTP Firewall / VPN Firewall Features Stateful Packet Inspection (SPI) • NAT VPN Protocols IPSec Pass-Thru • PPTP Pass-Thru • L2TP Pass-Thru Authentication CHAP Wireless WLAN Standards IEEE 802.11b 802.11b Data Rates 11 Mbps, 5.5 Mbps, 2 Mbps, 1 Mbps Modulation CCK • DBPSK • DQPSK • DSSS Security WEP Antenna Type Internal / Integrated Antenna x 3 Modem DSL Standards ADSL Lite (G.Lite ITU G.992.2) Other Features LED Indicators Power • DSL • Link Additional Features Auto Crossover (MDI/MDI-X) Dimensions Width 2 in. Depth 10 in. Height 8 in. Weight 1.4 lb. Miscellaneous Release Date December, 2003

y must contect ur service provider

please rate me

1. check to see if you have an IP address
2. Go to the DOS prompt by typing "cmd" then type "ipconfig /all this will tell you if you have a valid IP address and that you are connected to the ISP.
3. At the same prompt type "ipconfig /release" then type "ipconfig /renew"

Hi

You can set up the AP 5131 through Hyperterminal by accessing it through COM1 to start,
19200 bits per second
8 data bits
Parity: None
Stop bits: 1
Flow Control: None.

Good Luck. :)

If you connect the computer directly to the modem, does it work?
If that works then the modem is working.
Now connect the computer to the router and the modem to the router.
You will need to open the set up page of the router to check the settings of the router.
You can set up the router without the CD also.
It is very easy.
Click Here for step by step instructions about how to set up the router