Question about Sony Cyber-shot DSC-W55 Digital Camera

5 Answers

TURN POWER OFF AND ON AGAIN.

WHEN I TURN ON MY CAMERA IT SAYS ACCESS. AFTER A COUPLE OF SECONDS IT SAYS TURN THE POWER OFF AND ON AGAIN. I KEEP TURNING IT OFF AND ON AND IT SAYS THE SAME THING.

Posted by on

  • Anonymous Apr 27, 2009

    I had the same problem, we banged the camera on its side and low and behold, the lense came out and its solved the problem, so thanks, its saved me a £95.00 repair fee....

  • dramaqueen49 May 03, 2009

    i turn on the camera and it has a black screen and says access and takes a while to turn off, and i cant take pictures or review them

×

Ad

5 Answers

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 3 Answers

The problem is that the lens is jammed.
Here's what I did: I smacked the side of the camera on a tile floor a few times, until the lens started trying to open. Then I used a knife to pry up the lens a little. Believe it or not, it is now taking pictures. You can't imagine how excited I was to get it working.

If this sounds like a joke (it did to me), I got the idea from these forums:
http://www.digitalcamera-hq.com/digital-cameras/sony-cybershot-dscm1_question.html?qid=2900
http://www.camerahacker.com/Forums/DisplayComments.php?file=Digital%20Camera/Sony/dsc-w50_acess.turn_off_on_again.html

Good luck!

Posted on Apr 22, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Hey i had the same problem. n seeing as nothing else worked... taking out the battery and all i decided to take everyone else advice and bang it a few times. so what i did was bang it a few times on the side with the lenses down on the bathroom tiles. n waalaaa! as good as new now :D hope it works for tou

Posted on Jun 21, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have hit the side of the camera and like magic its working again thank u guys so much I have just saved money by doing a little research Thanks Guys.

Posted on Jun 28, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

If the camera appears to freeze or lock and the word ACCESS is displayed in the LCD, then a problem has occurred during the reading or writing of data on the Memory Stick® media. This could be caused by the media, or the camera itself.
Follow the steps below to troubleshoot this issue.

  1. Perform a power reset on the camera.
  2. If the issue is not resolved, turn off the camera.
  3. Remove the Memory Stick® media from the camera.
  4. Clean the metal contacts on the Memory Stick media with a soft, dry cloth or clean pencil eraser.
  5. Reinsert the Memory Stick media into the camera.
  6. Turn on the camera.
  7. If the issue reoccurs, turn off the camera.
  8. Remove the Memory Stick media from the camera.
  9. Insert a different Memory Stick media.
  10. Turn on the camera. NOTE: If the issue does not occur with different Memory Stick media, the previous Memory Stick media may be faulty and should be discarded.
The troubleshooting steps listed above should resolve your issue. If you have completed all of the steps and the issue is not resolved, service may be required. The Sony® eService Web site at http://eservice.sony.com/ can assist you in obtaining service from a Sony Service Center or locating a Sony Authorized Servicer.

Posted on Apr 25, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Hahaha...funny thing is that it works. Just smack it on its side

Posted on Jun 30, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Not working always show "turn thepower off and on


I'm sorry that the Camera is displaying the error message. "TURN THE POWER OFF AND ON AGAIN" displays on the LCD screen when the Lens Mechanism is stuck or when affected by any malfunction. If turning the power on and off again does not resolve the error message, try doing a power reset. Please follow the below steps to perform a power reset.


·Turn off the camera.
·Remove the battery pack.
·Press and hold the power button for 30 seconds.
·Allow the camera to remain without power for 60 seconds.
·Reinsert the battery pack.
·Turn on the camera.



Also try initializing the Camera if you're able to access the Menu items on the Camera. The Initialize option will be available underSetup or Main settings Sub Menus.

If the issue persists again, service is required. Pleaseclick hearto locate the service center near your area.

Thanks for understanding. Please let me know if your require any clarifications.

Aug 01, 2011 | Sony Cybershot DSCW310 Digital Camera

1 Answer

When i turn it on tried to access then tell me to turn the power off and on again


Hi,

Error: TURN THE POWER OFF AND ON AGAIN is displayed on the LCD screen when the Lens Mechanism is stuck or when affected by any malfunction. If turning the power on and off again does not resolve the error message, try doing a power reset and Initialize option.
Performing a manual power reset
Turn off the camera.
Remove the battery pack.
Press and hold the power button for 30 seconds.
Allow the camera to remain without power for 60 seconds.
Reinsert the battery pack.
Turn on the camera.
To reset the Camera back to factory default, select the INITIALIZE Option from the Setup 1 Menu of the Camera to OK. This will set the user defined settings back to factory default. The images and videos will not get deleted.
If the issue persists, service may be required.

Thanks for contacting FixYa.

Jun 19, 2011 | Sony Cyber-shot DSC-W35 Digital Camera

1 Answer

My camera displays "turn the


I'm sorry that the Camera is displaying the error message. "TURN THE POWER OFF AND ON AGAIN" displays on the LCD screen when the Lens Mechanism is stuck or when affected by any malfunction. If turning the power on and off again does not resolve the error message, try doing a power reset. Please follow the below steps to perform a power reset.



·Turn off the camera.
·Remove the battery pack.
·Press and hold the power button for 30 seconds.
·Allow the camera to remain without power for 60 seconds.
·Reinsert the battery pack.
·Turn on the camera.


Also try initializing the Cameraif you're able to access the Menu items on the Camera. The Initialize option will be available underSetup or Main settings Sub Menus.
If the issue persists again, service is required. Pleaseclick hearto locate the service center near your area.

Thanks for understanding. Please let me know if your require any clarifications.

Jun 10, 2011 | Sony Cyber-shot DSC-W70 Digital Camera

1 Answer

My sony Camera (DSC -W110) is showing "Turn the power off and on again" while switch on the camera,it appers again & again after switching the camera on and off


I'm sorry that the Camera is displaying the error message. "TURN THE POWER OFF AND ON AGAIN" displays on the LCD screen when the Lens Mechanism is stuck or when affected by any malfunction. If turning the power on and off again does not resolve the error message, try doing a power reset. Please follow the below steps to perform a power reset.





· Turn off the camera.

· Remove the battery pack.

· Press and hold the power button for 30 seconds.

· Allow the camera to remain without power for 60 seconds.

· Reinsert the battery pack.

· Turn on the camera.




Also tryinitializing the Cameraif you're able to access the Menu items on the Camera. The Initialize option will be available under Setup or Main settingsSub Menus.

If the issue persists again, service is required. Please click hear to locate the service center near your area.

Thanks for understanding. Please let me know if your require any clarifications.

Mar 21, 2011 | Sony Cyber-shot DSC-W110 Digital Camera

1 Answer

My Cyber Shot DSC W55 when i open it the lens keeps moving forward and backward and then something shows on the screen which says First "ACCESS" then the next one is "Turn The power off and...


Hi,


Error: TURN THE POWER OFF AND ON AGAIN or Access is displayed on the LCD screen when the Lens Mechanism is stuck or when affected by any malfunction. If turning the power on and off again does not resolve the error message, try doing a power reset and Initialize option.

Performing a manual power reset

Turn off the camera.

Remove the battery pack.

Press and hold the power button for 30 seconds.

Allow the camera to remain without power for 60 seconds.

Reinsert the battery pack.

Turn on the camera.

To reset the Camera back to factory default, select the INITIALIZE Option from the SET UP1 Menu of the Camera to OK.This will set the user defined settings back to factory default. The images and videos will not get deleted.


If the issue persists, service may be required.


Thanks for contacting FixYa.

Feb 24, 2011 | Sony Cyber-shot DSC-W55 Digital Camera

1 Answer

It put access than after it starts beeping and appears turn the power off and on again


Hi,


Error: TURN THE POWER OFF AND ON AGAIN is displayed on the LCD screen when the Lens Mechanism is stuck or when affected by any malfunction. If turning the power on and off again does not resolve the error message, try doing a power reset and Initialize option.

Performing a manual power reset

Turn off the camera.

Remove the battery pack.

Press and hold the power button for 30 seconds.

Allow the camera to remain without power for 60 seconds.

Reinsert the battery pack.

Turn on the camera.

To reset the Camera back to factory default, select the INITIALIZE Option from the SET UP1 Menu of the Camera to OK.This will set the user defined settings back to factory default. The images and videos will not get deleted.


If the issue persists, service may be required.


Thanks for contacting FixYa.

Dec 12, 2010 | Sony Cyber-shot DSC-W35 Digital Camera

2 Answers

Turn the power off and on again message


Hi,


Error: TURN THE POWER OFF AND ON AGAIN is displayed on the LCD screen when the Lens Mechanism is stuck or when affected by any malfunction. If turning the power on and off again does not resolve the error message, try doing a power reset and Initialize option.

Performing a manual power reset

Turn off the camera.

Remove the battery pack.

Press and hold the power button for 30 seconds.

Allow the camera to remain without power for 60 seconds.

Reinsert the battery pack.

Turn on the camera.

To reset the Camera back to factory default, select the INITIALIZE Option from the Main Settigs 1 Menu of the Camera to OK.This will set the user defined settings back to factory default. The images and videos will not get deleted.


If the issue persists, service may be required.


Thanks for contacting FixYa

Feb 15, 2010 | Sony Cyber-shot DSC-W170 Digital Camera

1 Answer

Sony Cyber Shots camera, turn the power off and on again problem


Hi,


Error: TURN THE POWER OFF AND ON AGAIN is displayed on the LCD screen when the Lens Mechanism is stuck or when affected by any malfunction. If turning the power on and off again does not resolve the error message, try doing a power reset and Initialize option.

Performing a manual power reset

Turn off the camera.

Remove the battery pack.

Press and hold the power button for 30 seconds.

Allow the camera to remain without power for 60 seconds.

Reinsert the battery pack.

Turn on the camera.

To reset the Camera back to factory default, select the INITIALIZE Option from the Main Settings Menu of the Camera to OK. This will set the user defined settings back to factory default. The images and videos will not get deleted.


If the issue persists, service may be required.


Thanks,

KenSolutions

FixYa

Sep 13, 2009 | Sony Cyber-shot DSC-W80 Digital Camera

1 Answer

Black screen


Hi,

Turn the power off and on again message is displayed when the Lens mechanism is stuck or when there is an internal malfunction. To resolve the issue, try turning off and on the power for few times. If the issue persists, try power resetting the Camera.
To power reset the Camera, remove the battery from the Camera. Press and hold the power button of the Camera for 30 seconds. Remain the Camera without power for 60 seconds and reinsert the battery to check the operation.
You can also try Initializing the Camera by selecting the INITIALIZE option from the SETUP1 Menu of the Camera.
If the issue persists, service may be required.

Thanks for using FixYa

Nov 24, 2008 | Sony Cyber-shot DSC-W55 Digital Camera

1 Answer

Software problem


I'm sorry that the Camera is displaying the error message. "TURN THE POWER OFF AND ON AGAIN" displays on the LCD screen when the Lens Mechanism is stuck or when affected by any malfunction. If turning the power on and off again does not resolve the error message, try doing a power reset. Please follow the below steps to perform a power reset.
  • Turn off the camera.
  • Remove the battery pack.
  • Press and hold the power button for 30 seconds.
  • Allow the camera to remain without power for 60 seconds.
  • Reinsert the battery pack.
  • Turn on the camera.

Also try initializing the Camera if you're able to access the Menu items on the Camera. The Initialize option will be available under Setup or Main settings Sub Menus.


If the issue persists again, service is required. Please click hear to locate the service center near your area.

Thanks for understanding. Please let me know if your require any further assistance.

Jun 23, 2008 | Sony Cyber-shot DSC-N1 Digital Camera

Not finding what you are looking for?
Sony Cyber-shot  DSC-W55 Digital Camera Logo

697 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Cameras Experts

kakima

Level 3 Expert

102366 Answers

james laughton
james laughton

Level 3 Expert

2168 Answers

JonSnell Electronic
JonSnell Electronic

Level 3 Expert

22111 Answers

Are you a Sony Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...