Question about Computers & Internet

1 Answer

Adjustments monitor m problems adjustments

Posted by on

  • 2 more comments 
  • mano99665 Apr 22, 2009

    I did that. the problem is i turn on the monitor there us a black around the inside of the screen. I adjust it with the buttons on the monitor and then it is ok, but when I restart my computer I have to adjust it again there is no place to click apply so it will stay like I want it. Im doing this for a friend I told her to get a big monitor like mine I have a 24inch one no problem.hope you can help us



    Manny

  • mano99665 Apr 22, 2009

    via on screen menu. They are push buttons on the monitor to move the black lines. I get it just right, but as soon as i restart the computer it go's right back to the same black lines. I'm losing about 3 inches from side to side and 2 inches up and down.



    Manny



  • mano99665 Apr 22, 2009

    Thank You that is what it is doing resetting each time off/on. there are not being saved.



    Thank You Manny

  • Kenny Wilson May 11, 2010

    Can you please state what is wrong with your monitor?

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

  • Expert
  • 192 Answers

Hi there.

What exactly is the problem?

If you need to adjust the screen, right-click anywhere on the desktop and then click properties, you can then adjust screen settings.

Hope that helps. If not, describe the problem you are having, and I'll do my best to help.

Tim

Posted on Apr 22, 2009

  • Timothy Farley Apr 22, 2009

    Ok, you can try changing the resolution via the display settings. Or another thing you could try, is changing the refresh rate for the monitor, advanced settings in the display settings.



    The controls you are using to move the black lines, are they via an on-screen menu (on the monitor), or like knob controls (which you turn)?

  • Timothy Farley Apr 22, 2009

    Ok, that means the monitor is resetting each time it turns off/on. Either, the settings aren't being saved properly, or the monitor is faulty

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why does my monitor keeps adjusting to the 4bit color only and I can not adjust the resolution


Color bit depthe is not the monitor problem, it is the video card problem, make sure you have correct video card driver installed.

Failed TV and Monitors: http://s807.photobucket.com/home/budm/allalbums

Sep 28, 2010 | HP Compaq FS7600 17" CRT Monitor

1 Answer

Adjust color bright&contrast


there will be adjustable in monitor menu when u click menu on your monitor there it will show adjusting contrast and brightness
after doing above still having a problem......there will be internal monitor problem call hardware engg

Sep 24, 2010 | Computers & Internet

1 Answer

My LG 17" CRT monitor , screen is blinking rapidly with slightly dark shadow. pl. help


If it is an older monitor, this may just be a sign of aging. It is possible that the adjustment knobs and buttons on the front, bottom, or side of the monitor may have been moved. Try adjusting those to see if you can tone out the problem. Also check to make sure the monitor cable is secure to both the monitor and the computer. You may also try plugging the monitor's power cable into a different outlet. Finally, you could try adjusting your video properties in Windows, but that's probably not the problem unless you have been in there before.

Jul 20, 2010 | LG Flatron F700P 17" CRT Monitor

2 Answers

My monitor keeps saying auto adjustment in progress


Hello Friend,
This is automatically adjusting your Screen.Horizontal/vertical manual manual adjustment and Focus adjustment can Solve the Problem.Turn off auto feature. I hope your Problem can be Solved by going to this link for Detailed Instruction of your Monitor...
Thanks for Contacting FixYa...Keep Using..

May 11, 2010 | HP w2207 Monitor

1 Answer

Hansol710p 17"Monitor color adjustment problem


wich is factory colour profile from hansol 710p ? thanks in advance p.s. jovica.tasic@hotmail.com

Jul 25, 2009 | Hansol 710 P Monitor

1 Answer

Tilting Problem with monitor


Screen position adjustment

To optimize the viewing position, you can adjust the monitor tilt by using
both of your hands to hold the edges of the monitor.
The monitor can be adjusted to 15 degrees up or 5 degrees down.

Jun 06, 2009 | Acer 22" X223w LCD Monitor

1 Answer

How to angle the monitor


I have Model X203H & had the same problem. The support CD explained how to adjust the monitor:

Screen position adjustment
To optimize the viewing position, you can adjust the monitor tilt by using
both of your hands to hold the edges of the monitor.
The monitor can be adjusted to 15 degrees up or 5 degrees down.

Apr 16, 2009 | Acer 22" X223w LCD Monitor

1 Answer

Need to Auto Adjust Envision 20" monitor every time


yes it may be a memory problem inside the monitor replace the memory from technical person
or refer the manual with the monitor some trick may given so that push menu twotimes or operate like mobole button

Nov 09, 2008 | Proview PX-986 19" CRT Monitor

3 Answers

Problem with Studioworks 563 monitor


LG Studioworks 563N Monitor horizontal width is exceeding out of screen and not able to adjust it along with pincushion through menu. IRF S630A Transistor replaced, no effect. Pl. help.

Nov 18, 2007 | LG Studioworks 563N 15" CRT Monitor

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

48 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...