Question about ElectroVoice Microphones

Open Question

EV Lavalier Microphone Clip

The clip for my Lavalier BL VHF Lavalier Microphone clip broke. How do I get a replacement clip? Model Number D4NBL-1.

Posted by on

5 Suggested Answers

  • 125 Answers

SOURCE: I need a replacement for a Shure WL93 lavalier

Try Ebay:

Posted on Apr 04, 2009

  • 5603 Answers

SOURCE: My Samson HM40 clip is broken

Much of the plastic used on music stuff is ABS and one can SOMETIMES glue it with the black ABS plumbing glue from the home improvement stores. Try to build up a fillet with several coats.

I for instance repaired the music rack brackets for a Tyros keyboard that takes a lot of strain using this glue. Your must have reasonably good "fitup" of the break.

Posted on Sep 30, 2009

  • 40 Answers

SOURCE: What are the hazards a sound engineer can get from

Here is some very general info, however for more detailed info, I need more information on what your using it for. Speechs, Play, Vocals, Bands? Inside or Outside venue?

For Vocals you should have no problems with a Wireless Handheld SM58, they work over a large range, however still have a limit. Make sure the receivers are always close enough to the mics to hold a reliable connection.

Wireless Lapel Mics (Clip-on) are more troublesome, as they are generally consenser mics which are more susceptible to feedback. You also need to place them somewhere in range of the person's mouth, whist avoiding placing somewhere where you will get alot of fabric movement whist moving around, or you will hear that very loudly FOH. You also need to deal with body-packs and wires.

Leturn mics are generally easier to deal with than Lapel, however again are Condenser and more feedback prone.

I would reccomend the SM58 where possible, as it is much easier to work with, and you are more likely to get a better sound with less work.

Posted on Mar 25, 2010

  • 611 Answers

SOURCE: My problem regarding my Samson

Call Samson to get a replacement or repair.

Posted on Feb 14, 2011

  • 3018 Answers

SOURCE: telex ht200 is fatter microphone

Here you go. I would use something like this. This has a 1.75" (44mm) diameter.
You can also go here scroll down to page 5 and you can use this - $15.00 Telex ELM-22S Black Lapel Mic, Shure TA4F w/ Mic Clip -- That clip is the same diameter as your mic and is made by Telex.

Posted on Mar 22, 2011

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


1 Points

Related Questions:

1 Answer

Shure SM93 lavalier microphone will not work

Make certain phantom power is turned on. The SM93 reqjuires phantom power from the mixer.

Sep 24, 2013 | Shure SM93 Micro-Lavalier Consumer...

1 Answer

I have a shure horn mic 98H . the clip broke. can it be repaired?

Go to, look under support and it will give you price list and return instructions.

Jul 01, 2012 | Shure BETA 98H/C Microphone

1 Answer

Telex ht200 is fatter microphone and I am looking for a microphone clip to mount it on a microphone stand. Universal clips are too skinny - they will not fit around the mic. Does anyone know where I cn get...

Here you go. I would use something like this. This has a 1.75" (44mm) diameter.
You can also go here scroll down to page 5 and you can use this - $15.00 Telex ELM-22S Black Lapel Mic, Shure TA4F w/ Mic Clip -- That clip is the same diameter as your mic and is made by Telex.

Mar 22, 2011 | Telex HT-200 Handheld Microphone...

1 Answer

How do I order a mic clip for the wireless mic. The one I have broke.

Contact Bosch/EV (formerly Telex) via website or call them. They're in Burnsville Minnesota and their customer service is excellent.

Feb 25, 2011 | Telex WT-55 Belt Pack Transmitter (027)...

2 Answers

I belong to a local church and they have a TELEX WWT-55 unit which is missing the Belt clip. Any suggestions as to where I can find one. Area is West of Boston Ma. Natick or Framingham. Appreciate any...

Telex is an Electrovoice product, based in Minneapolis MN. Check their website for customer service, and a phone number. They are always happy to help.
If the product is older and has no replacement from the manufacturer, you may need to search online for auction sites that may sell older systems.
God Luck.

Feb 21, 2011 | Telex WT-55 Belt Pack Transmitter (027)...

2 Answers

Is there a way to open up a Shure Beta 58A?

Once you remove the grill, there is a C-Clip that holds the cartridge down into the handle. Use some c-clip pliers to pull the c-clip out of the handle. The c-clip will remain around the post on the cartridge, but that's ok.

Feb 27, 2010 | Shure Beta 58A Professional Microphone

1 Answer

Replacement lavalier transmitters

The ATW-R12 is not made any more. We here at Pro Line Music are Audiotechnica Dealers. I would need to know what frequences the transmitters are to see if there is another unit that can match thoes frequences. call 215-736-8055

Jan 02, 2010 | Audio Technica ATW-R12 DIVERSITY RECEIVER...

1 Answer

Instrument mic - clip has snapped off

I'd recommend or Applied sells a universal clamp for their Wi5 wireless microphone system that works for brass, woodwinds and stringed instruments.

May 25, 2009 | Samson AH1/ HM40 Professional Microphone

1 Answer

My congregation has a four year old sound system

here is a contact number for the manufacture. 1-800-392-3497
ask for electro voice parts
tell them the model number and make
and a description of the part you need.

Feb 25, 2009 | ElectroVoice Electro Voice HTU2D-767A...

Not finding what you are looking for?
Microphones Logo

Related Topics:

98 people viewed this question

Ask a Question

Usually answered in minutes!

Top ElectroVoice Microphones Experts


Level 2 Expert

611 Answers

Ben Armstrong

Level 2 Expert

332 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you an ElectroVoice Microphone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides