Question about Computers & Internet

1 Answer

Hi guys, i sold a compaq mainboard as asecond hand hw, but the seller did't have a mb-cd or manual. Maybe ican get a drawing about that board? best regards herebrt

Posted by on

  • Jerry May 11, 2010

    If you can provide the compaq model, we can provide you with more information.

  • Lee Hodgson
    Lee Hodgson May 11, 2010

    yes we do need the model number please

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 177 Answers

On The Mainboard is a model number

Google "Chipset Divers + (the model number)"

You will find it in no time!......If you don't, post a reply and the model number and I'll get it for you k!

Posted on Apr 21, 2009

  • C. Christensen
    C. Christensen Apr 21, 2009

    On The Mainboard is a model number



    Google "Chipset Divers + (the model number)"



    You will find it in no time!......If you don't, post a reply and the model number and I'll get it for you k!

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Are manuals and/or parts available, md6250cp


I can only suggest that you go to this webpage
http://support.memorex.com/
and either contact support, or use ask a question form for pukka information (assuming I am correct in thinking that this model is manufactured and sold by Memorex)
Other than that, I can only suggest buying/asking a the seller a second hand machine that comes with a manual.
Manuals for Memorex portable CD players do exist, but not it seems for the MD6250CP, I don't how similar they are. Meorex support might be able to answer this too.

24.September.2015

Sep 24, 2015 | Audio Players & Recorders

1 Answer

I lost my mother board CD sis 963LUA


Hello try the site here:

http://www.asrock.com/mb/SiS/K7S41GX/?cat=Download

Please select your windows system.

Some of the files maybe needs to be unziped, before you install them.

Or this site:

http://www.foxconnchannel.com/ProductDetail.aspx?T=Motherboard&U=en-us0000111

The drivers should fit the mainboard.

If not, visit the mainboards or the pc`s homepage in search for the drivers.

Good luck.

Jan 31, 2013 | Computers & Internet

1 Answer

Need to know the exact value of capacitor about msi 848p neo2-v .the capacitor beside processor b'coz i want to replace it since the motherboard is not my hand. somebody know the pls tell me.. th


Hello here is the homepage:

http://www.msi.com/product/mb/848P%20Neo2-V.html#/?div=Manual

The value is printed in on the capasitors.
You can unsolder them but, mark the location where it goes
and remember plus and minus.
This will probably cost the same, as a new mainboard to renew them all.

A electronic repair shop, can order the capasitors for you.

A brand new mainboard, is sold today for around 100 dollars, in a online shop.
Your mainboard has socket lga775, so you don`t need to buy a new cpu, but you probably have to buy a new windows, and ram modules as well.

Good luck

Jan 13, 2013 | MSI 848P Neo2V Intel 848P Socket 775 ATX...

1 Answer

I have motherboard Compaq #277498-001 and can't find power sw


Not sure of your particular MB, but most always the switch is a pair of pins in an array where the front panel LEDs and reset and power switch are.
This array of pins is almost always at the lower right hand side of MB. Assume the components side is facing you and the expansion slots are at your left hand, (where you add extra cards like video etc). then look at the lower right side or bottom edge, mostly right at the edge of the board. Should be an a double row of pins, at least 8 maybe up to 12. Look real close next to these and you may see print indicating which pair do what. PS = power switch. RS = reset, HD = Hard drive LED PLED = power led light.Spk internal beep speaker etc. (Note LEDs require correct polarity to work) Sometimes no print there.. Then you need the manual to decipher pin pairs. Or experiment. All you need to do is make the connection momentarily (like push button) with a small screw driver tip to start it, while looking for correct pins.
If no power on check your power supply connections on the MB. Or suspect either MB or Power supply issue.

Mar 24, 2012 | Compaq ( 277498-001) Motherboard

1 Answer

I have a GF615M-P33V2 - how can I get Windows Server 2003 drivers and software? Also, IDE CD/DVD only work intermittently. Is there any way I can connect a CD, DVD and a floppy. I've already an IDE HD...


Hi, the download site is here:

http://www.msi.com/product/mb/GF615M-P33.html#/?div=Driver&os=All

But there is no drivers for windows 2003.
The 32 bit driver for windows xp will sometimes work
if it is a 32 bit system.
You can buy an external floppy drive and a cd/dvd drive to
connect the usb.
But the mainboard has a connector for the floppy drive.
Try to install the chipset drivers first and unzip the file before installation.

Consider to buy a mainboard compatible with windows server 2003
I will recomend a ASUS mainboard.

Sep 17, 2011 | MSI GF615M-P31 AM3 NVIDIA GeForce 6150SE &...

1 Answer

TA790XE Ver 6.0 Have been running a 9650+ for a couple years. bought a 1090T and installed it. Bios is the newest and recognizes the CPU. Win 7 boots to the point the desktop starts and then goes to a...


Hi, here you can see a list of cpu that your mainboard supports:

http://www.biostar.com.tw/app/en/mb/cpu_support.php?S_ID=417

You maybe have to download a manual.
It will show you how to unlock all the cores at the cpu.
That means you have to enter the bios to make a setting
so the bios can work with the new cpu.

Aug 31, 2011 | Biostar TA790XE 6x AMD 790X Socket AM2 MB...

1 Answer

Need manual


Not exactly the standard MB spec sheet, but this may give you what you need.

http://h18000.www1.hp.com/products/quickspecs/12426_na/12426_na.HTML

Sep 09, 2009 | Intel Motherboard

1 Answer

Laptop dows not charge.


No, you have to replace fried charge controller IC with exact one, or it'll not work.

Jan 02, 2009 | HP Compaq nc6320 Notebook

1 Answer

Using Instructions


Maytag UK
44(0)1737231000
Fax 44(0)1737778822
tell then you are trying to identify a part and they will fax a drawing to you.

Oct 16, 2008 | Admiral AW22 Top Load Washer

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

21 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...