Question about Philips DCM230/37 iPod Docking Executive 30 Watt Micro Audio System Shelf System
My Philips Docking Entertainment System DCM230/37 works great, except that I can't tune to the exact AM radio station that I want. I had an AM tuner before that you could switch between USA mode (with radio stations stopping on even numbers like AM or MW 620, AM 960, AM 1360, etc) and a foreign mode (with the digital receiver stopping on odd numbers like AM or MW 621, AM 963, AM 1359, etc).
I can't figure out how to switch it to the USA mode; it stops on the odd numbers, not the even numbers where the stations are broadcast.
AM is just another name for MW. The Radio should tune to a strong signal regardless of the frequency the radio is set to. It should also sweep the entire frequency looking for stations. I'm assuming it has a channel scan setting, plus options to set a number for the station. AM/MW are very much dependent on the position of the either internal or external Ariel. If you have the radio in the wrong position or you have some electrical equipment nearby it could block the signal for the station you want, but not affect the others. Which might explain why it can't find the station you want.
Posted on May 05, 2017
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Mine did the same, the station was trying to connect on channel 1 wi-fi where the centre was on channel 11, check under information and wi-fi for both. I then did a restore on the station, put both into installation mode and they found each other after a few mins.
Hope this helps
Posted on Aug 09, 2008
SOURCE: trying to reset programmable stations or clear them to set new ones, cant seem to figure it out after finding a new station and holding the set button awhile or even trying to find a reset button to s
Download the user manual here:
Posted on May 21, 2009
SOURCE: cd stuck in philips dcm 230
I had the same issue today and came up with a solution...maybe not the best, but it worked. I unplugged the unit and then holding it by the sides (which I was sitting down) struck (not too hard) the unit onto my knees. Be sure you are holding the unit with the CD opening facing the floor. You may have to do this a few times, but the CD should start to come out, after which you should be able to grab hold of the disc and pull it gently out. Once I did this, I inserted another CD and everything worked fine. Being the daring type (obviously), I tried the original CD again, and like the first time it got stuck again and I had to repeat the same process. I came to the conclusion that for whatever reason, the CD was bad and tossed it out. Any other CD I put in the unit works just fine. Bottom line, it may be crude, but it works!
Posted on Jul 21, 2010
Tips for a great answer:
Jun 20, 2015 | Philips FWC550 Shelf System
Sep 28, 2014 | Philips DC570/37 iPod Docking Tower 2.1...
b Source buttons
- DISC/USB: toggles between DISC or
RADIO: toggles between FM and AM/
TV: switches to TV mode. The sound
from the TV will output through the
connected speaker system.
AUX/DI: switches to the external device
that is connected to the AUDIO IN-AUX
MP3 LINE-IN: switches to audio device
that is connected to the MP3 LINE-IN
Apr 17, 2011 | Philips HTS 3154 Theater System
Aug 17, 2010 | Philips DCP951/37 Docking Entertainment...
Jun 06, 2010 | Philips DC185 Docking CD Sound Machine ...
May 31, 2009 | Sony STR-D600SS Shelf System
Mar 17, 2009 | Philips DCP951/37 Docking Entertainment...
Mar 01, 2009 | Bose 3 2 1 Series I DVD Home Entertainment...
Jan 09, 2009 | Bose 3 2 1 Series I DVD Home Entertainment...
Dec 02, 2008 | Philips AJ300D Clock Radio with...
491 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: