Question about McCulloch 10" Electric Pole / Chain Saw
The pole on my McCulough MCP1510 electric pole chainsaw snapped and I can't find a replacement.
Looks like you will have to make one to fit if no replacement is available.
Posted on Jul 08, 2009
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Oct 10, 2016 | Remington Electric Chain Saw
Oct 14, 2015 | Remington 10" Electric Pole Saw Repl....
1. Remove battery from chain saw.
2. Separate main handle from chain saw
power head by pressing both release
buttons on main handle and pulling
apart. The release buttons are just in
front of the trigger.
3. Align rib on chain saw power head with
groove in power head adapter on pole.
4. Slide power head into power head
adapter until units "snap" together.
IMPORTANT: Both release
buttons on power head adapter must be
5. Align rib on handle adapter on pole
with groove in main handle.
6. Slide main handle into handle adapter
until units "snap" together.
IMPORTANT: Both release buttons
on main handle must be fully
7. Slide battery onto main handle until
release buttons "snap" together.
Be sure the battery is charged.
To extend the pole:
1. Loosen the clamping
lever. Pole will slide
2. Pull inner pole section out to desired
length of extension.
3. To lock pole in position, tighten clamping
Sep 12, 2011 | Remington Cordless 18-Volt 8-Inch Cordless...
Sep 08, 2011 | Garden
May 11, 2010 | Remington Electric Pole Saw
Dec 28, 2009 | McCulloch 10" Electric Pole / Chain Saw
Oct 03, 2009 | Remington Electric Pole Saw
Aug 23, 2009 | Remington Polesaw Wizard
227 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: