Question about Protron PLTV-32 Television

2 Answers

Protron 32" LCD tv just stopped working....went to turn it on and there was a "pop" noise and no lights came on, no power, tried to plug it in to another outlet and its basically dead!! Any suggestions?? What I am reading that this is a common problem with people, does anyone know if its worth it to fix it, its no more than 2 years old!!!

Posted by on

  • 3 more comments 
  • tonyboat Apr 25, 2009

    My TV just stopped working. I don't believe there was any pop, it just stopped working. Even when I try to turn it on by hand, there is no reaction.

  • Anonymous May 04, 2009

    Protron 32" after three years a poping sound starts when ever the tv is turned on. Is my Tv about to go.

  • Anonymous May 08, 2009

    tv quit after two years of good use. total power loss. this tv was a replacement for a protron that would jump from digital to anolog or other settings for no aparent reason. i have found no solutions to either problem.

  • hangen May 14, 2009

    My 32" LCD Protron just stop working. We were watching and all of a sudden the power went out. tryed different plugs and that didn't work. The tv is just 2 years old.


  • Anonymous May 15, 2009

    Was watching TV and it just went out and won't turn back on. Have tried different outlets and removing and replacing power cord....nothing happens. TV is 2 1/2 years old.

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

I BROUGHT A POWER SUPPLY ON EBAY THE PART # IS FSP194-3F01 POWER SUPPLY PROTRON 3250 I HOPE THAT HELP EASY TO REPLACE COST ABOUT 96.00

Posted on Apr 22, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

You can also order the power supply from www.discount-merchant.com for $69.95, or at www.power-on.com for $59 or at www.ramplus.com for $58.75.

Discount merchant offers price matching. Thats where I am headed to get mine since I live in San Diego and can pick it up locally.

There is always Ebay too

Posted on Nov 24, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My PLTV_3250 just stop work. was on and just went black.


Completely dead,no LED power light indicator at all?Yes,than u check the power source?Yes,than the tv power supply board is the causes and the problems.That the board,where the power a/c cord plug into it.Tries websites like Shopjimmy.com,Ebay.com to buy a whole refurbish power supply board for the replacement.

Dec 03, 2010 | Protron PLTV3250 32 in. LCD Television

1 Answer

My Protron PLTV3250 32 in tv just turned itself off..wont turn back on


Your power supply is dead. You can get one from POWER-ON.COM for about $64.00 including shipping and handling. My 32 inch went dead after only one year and I just got a new power supply and it works fine.

Oct 18, 2009 | Protron PLTV3250 32 in. LCD Television

1 Answer

I have a protron 37 inch lcd that made a small popping noise and went off. It will not turn back on. I have only used this thing for 8 months. Any ideas?


a transistor overheating and cracking in the switch mode power supply can do that,or a high voltage component failure.
open it up and look and see if anything is burnt.

Sep 14, 2009 | Protron PLTV3250 32 in. LCD Television

3 Answers

My protron lcd tv power supply died and i would like to find a new one. it is 120 to 12 volts and 3 amps but has a 4 pin connector


Mine did the same thing right before 4th of July. I was watching tv and it just went off. At first I thought my power had gone out, but the tv was the only thing that was off. I tried to turn it back on, but it was dead as a doornail. :-) When I plug in the power cord the blue light usually comes on or the fan runs, etc. I tried to plug in the power cord and it did nothing, so I was upset thinking I had to get another tv.

I took a gamble that it was the powercord and after searching and searching finally found this website. http://www.lcdpayless.com. I placed my order on Thursday and went out of town for the 4th and I checked my mail today (Monday) and it was there. I plugged it in, the power came on and the tv works perfectly....plus the new cord doesn't have an annoying fan.

The cord is pricey at $117, but it beats buying a new tv. The company accepts returns minus a 20% restocking fee and shipping, so I figured worse case scenario I would only be out of $40+bucks if it didn't work and I had to send it back. So, if you plug your current power cord in and it's not lighting up, it may be your power cord. Hope this helps!!!

Jun 09, 2009 | Protron PLTV-32 Television

2 Answers

Protron pltv3250 32 in. lcd, no power, no lights


You will have to have the set checked by someone to confirm this,
but most likely there is a problem with the TVs internal power supply.

Jan 24, 2009 | Protron PLTV3250 32 in. LCD Television

1 Answer

PROTRON 26 TWO YEARS OLD


Symptoms of a Defective or dying Power supplies on LCD TVs.
1. Light(s) on the front panel are behaving not normal example, blinking, amber color or not steady, fainting, etc.
2. TV not turning ON properly.
3. TV turns OFF by itself.
4. Needs to be unplug to many times to make it work.
5. Humming or high pitch noise heard through speakers or at the back of the TV.

I repair these power supplies. Write to jah2mil@hotmail.com

Jan 20, 2009 | Protron PLTV-26 26 in. HD-Ready LCD...

2 Answers

TV DEAD


hello, the first thing to do is to check the power supply, meaning check the main fuse and burned components,if do not have any electronics repair skills call the repairman, but first carefully open the set and check the all the fuses.

Dec 19, 2008 | Protron PLTV-32 Television

2 Answers

TV just went blank...no indication of power


I fixed the solution by calling the company which is now bankrupt....so I had to search the Internet to find an adapter.

Thanks for offering me your assistance programs.

Jerry

Aug 20, 2008 | Protron PLTV-32 Television

8 Answers

Protron pltv 32 tv


funny that no one's been able to help you, because I accidentally discovered that the power supply cord for my computer worked for my Protron PLTV-32C lcd...  not sure if your model is different in someway, but you may want to try the cord from your own PC first, 
and if it works. 
 

Jan 25, 2008 | Protron PLTV-32 Television

Not finding what you are looking for?
Protron PLTV-32 Television Logo

366 people viewed this question

Ask a Question

Usually answered in minutes!

Top Protron Televison & Video Experts

Jaime Hernandez

Level 3 Expert

2318 Answers

The Knight
The Knight

Level 3 Expert

74136 Answers

Cindy Wells

Level 3 Expert

5103 Answers

Are you a Protron Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...