What if color right have the blue frame paint i

Long side frame left side rear it has heat cooling fins. Could me black and has wires going to it bolted to frame. Follow the wires from the stator on the right side of the eng case..

what year is it ?

Did you check the frame rail by your left toe? it may have been painted over.

go to an online oem parts seller, ie cheap cycle parts, and compare the part number for the frame

Get a manual and buy all the color and gauge of wire you will need.also connect kit with male/ female connectors to ease taking her apart again . Wire drigram like map,, just follow and do one section at a time.did a 3cly 350 Kawasaki all blue wire,4hours.15years old.easier than it looks!

2. Places,, on the front between the left and right upper a-arms theres a brace,, should be stamped on top flat spot,,,behind winch if you have one,, and. Onthe frame around the foot pedal on driver side L side ,,, may have to do some cleaning to see

Sand it down and repaint

Hi. Depending on your skill level the starting point would be check "ALL" the fuses with a test light/multimeter. Next point would probably be check the starter itself, Again with a test light or multimeter you should have the main positive to the starter - make sure you have good battery voltage and check this whilst attempting to crank. Then the crank feed itself which is the small wire to the starter solenoid, Again check for good voltage whilst attempting to crank. If there is voltage on both then make sure the starter has a good earth by using the starter motor body as the earth whilst testing the main feed at the starter. If you have good main feed and crank the starter has failed. If not you need to post your test results for further help, Jon

make sure your ground wire is making good connection cannot be any paint between wire and frame ground. good luck

having same prob with my preditor 500 any advice