Question about Standard (CRT) Televisions

1 Answer


The tv went off on its own,when you power on the led comes on for seconds and goes off.There is a hissing sound heard from the chopper transformer.i checked powersupply and replaced,STR REGULATOR,OPTO COUPLER,MAINCAP,RECTIER,ERROR AMP and several surge caps in the powersupply.i isolated proccesor ic and the led would come on normal.i checked 5V,8V and 12V regulators and still nothing.all the secondary voltages are missing including the B+.Kindly assist.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert who has answered 500 questions.

  • Expert
  • 556 Answers

It was not necessry to replace so many parts if you go as per proper procedure.please proceed as 1 isolate horizontal output section from power supply & make power supply ok. 2 if it becomes ok check hor osc,driver&h/output section. 3 if it is ok connect power input to hor.section which was isolated. 4 check for loose contact or print. 5 put on tv .

Posted on Sep 22, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

We have an JVC AV-27020 tv that only turns on from being plugged in. Once on it stays for about a minute or two before it shuts off. What do we do? Please help!!

t.s.s. log for jvc televisions -
JVC, AV32D200, Dead, Television will not turn on. ... rectifier diodes D922, or D923 the voltage never pops up as soon as the TV is plugged in. ..... deflection collapse after 30 seconds vertical IC okay 9volt regulator being pulled down to 3 ... JVC,AV27020, SYSTEM CONTROL, AV27020 Tech only getting a blue screen no ...

180125 T.V WILL NOT STAY ON: JVC AV-27F702 27" TV
Detail: I HAVE A T.V. THAT WILL ONLY STAY ON FOR ABOUT 5 SECONDS BEFORE ... a friend, was working when it left his house, I have place on tv stand,plugged it in, ... My jvc av-32890 makes a click and shuts off 95% of the time. ... JVC AV-27020 TV Blinking LED, Static Electricity on tube but no sound and image.

Nov 08, 2015 | JVC Standard (CRT) Televisions

1 Answer

I have a JVC TV AV-21DTG2 the TV goes on protection mode as soon as I switch on the mains power

The power supply regulator section circuit has to be troubleshooted. There might be some shorted component/s. It is a skilled work. You must have sound knoledge in electronics to do this work.

Apr 24, 2012 | JVC AV-32D305 32" TV

1 Answer

JVC AV-K21T: TV goes off by itself

U know how to solder right?Take the backcover off take back of the handle screw driver taps where the part said it flickker or video back on, resolder that.

Sep 27, 2009 | JVC AV-20D303 20" TV

2 Answers

My jvc av-32d302 tv has sound but i cant get an image i get just a black screen. if i unplug it and plug it in real quick i get a snow image for a second and then it goes black

There is a problem in the power supply, a defective voltage regulator or a bad capacitor. It is a good idea to call your tv repair shop and ask on what a repair would run.

Sep 10, 2009 | JVC AV-32D302 TV

1 Answer

Tv went Black and wont come on now?

Sounds like you were having a power failure in the community,, we call it a brown out. just turn it off and unplug it,, I'm not sure if this is what the problem is.. I had this to happen years ago on a magnvox console.. I will check and see what I can find out for your model tv..

Aug 22, 2009 | JVC AV-27260 27" TV

1 Answer

My tv went dead during a lightning storm. I heard

The sound could have come from one of your power capacitors. You could tell if one of them is no longer operational by looking at them; they will be burned, or blistered, or will be bulging. If this is a CRT type of TV ensure that you only look inside if you are fully aware of how to deal with the lethal voltages that are stored on the inside of the unit.

Aug 09, 2009 | JVC AV-32850 TV

1 Answer

Tv will not recognize channels to save, goes to black screen

If you want to get the original remote for this model (AV-30W776), you can find it at this JVC parts ditrubutor:

JVC AV-30W776 Replacement Part Remote Control

Jan 09, 2009 | JVC AV-30W776 30" TV

1 Answer


try resoldering vertical ic pins

Apr 19, 2008 | JVC AV-32260 32" TV

1 Answer

Blue Screen

I don't have a solution, but wanting to know if you ever resolved your problem? I'm having the same issue with my JVC 32" model # AV-32D500.


Jan 12, 2008 | JVC AV-32D500 32" TV

1 Answer

JVC TV model# AV-32920 No Power


Feb 21, 2007 | JVC AV-32920 32" TV

Not finding what you are looking for?
Standard (CRT) Televisions Logo

Related Topics:

339 people viewed this question

Ask a Question

Usually answered in minutes!

Top Standard (CRT) Televisions Experts

The Knight
The Knight

Level 3 Expert

66352 Answers

matt martin
matt martin

Level 3 Expert

1187 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Standard (CRT) Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides