Question about NorStar M7310 Corded Phone

2 Answers

Norstar M7310- buttons don't produce tone anymore

We think the power went out, and now both of our office Norstar M7310 phones don't produce a tone (or the correct tone?) on an active call anymore.

This is a problem because to call our voice mail or any "press this number" system we can dial in the number- but the other system doesn't recognize the tone. It is definitely our phones and not the systems.

Please help!

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 60 Answers

Have you tried un plugging then plugging them back in to reset them, if not you may have to power cycle the main system.

Posted on Jul 28, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 18 Answers

Its the problem from the system.

Go to the programming of Norstar by Feature **266344 and the password is 266344.
Go to line datd or line and make dialling made as Tone.
It will fix ur problem.


















Posted on Jul 12, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Nortel m7310 cant use touch tone


Try Feature 808 before pressing the touchtone digit - it tells the Norstar to send Long Tones to the remote system.

Jul 22, 2013 | Nortel Meridian M7310 Business Phone...

1 Answer

Turn off paging button for norstar m7310


On each phone, press Feature *1 and the OK soft key. This will clear the button.

Jan 18, 2013 | NorStar Meridian M7310 Phone

1 Answer

How do I activate the handsfree mute button on Norstar M7310? When I push outside line, then handsfree, I get dial tone, but cannot dial outside number. When call is incoming, after answering, I cannot...


familirize with devices user manual whether has feature functions requested. Second, ascertain that device was least malfunctioning since acquired. normally, familirising with innovative devices makes expertise in functionality.

Jul 20, 2011 | NorStar Meridian M7310 Phone

1 Answer

I recently got moved from my regular office to a different office. how can i use same phone extension in new office? we are using norstar m7310 phones.


Should be simple ... just change the pair you used in the former office to the new office in your punch down closet.

Aug 10, 2010 | NorStar Meridian M7310 Phone

1 Answer

All buttons dial the same line.


Check to see if the one touch button for the cash office is stuck down, sometimes the corner will stick but is hard to notice its down.

Apr 10, 2010 | NorStar M7310 Corded Phone

2 Answers

Meridian Norstar M7310 -- Phone's buttons seem disabled.


Sounds like a stuck button!

Look for the button that is depressed... or the button that has that person that the set is always calling and remove that button with a key/ small knife/ screwdriver or something.

When you take this button off the set, I bet that your set will start working again.

Clean that button, maybe there is something spilled on it.

Good Luck.

Jun 21, 2009 | NorStar Meridian M7310 Phone

1 Answer

Setting Pulse/Tone


We have a problem with the m7310 norstar phones, since power went, we lost all configurations, and we cannot restore them back, extensions cannot call out they are disabled, please help us with the admin or system coordinator manual

Oct 13, 2008 | NorStar M7310 Corded Phone

2 Answers

Norstar m7310 phone


Rushy: I assume you have a KSU which controls the entire system. The KSU is cabled to each line number provided by your local phone company. Once you have this line established it now makes contact with your phone set via dedicated cabling to each telephone set.. With all this hardware in place you can now program the line keys on each set for either one touch dialing or line access for your dial tone. Program guides can be aquired through GOOGLE by entering " Norstar m7310 program guide".Thank You. Jerry

Feb 08, 2008 | NorStar Meridian M7310 Phone

Not finding what you are looking for?
NorStar M7310 Corded Phone Logo

370 people viewed this question

Ask a Question

Usually answered in minutes!

Top NorStar Lands Phones Experts

george  peters
george peters

Level 3 Expert

860 Answers

kakima

Level 3 Expert

102366 Answers

dan4261

Level 1 Expert

14 Answers

Are you a NorStar Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...