My screen is not accurate and I see it hard to see the words

Not inowing the program you're using makes it hard to explain, but if you are using Word or some well known word processing program, it has a place at the top of the screen to click and increase size. It has a block labeled Font. Just click n that and increase the number.

that is called STALLing, (not arguing word, but is more accurate)
most cars stall for 1 reason
never doing a tuneup. 99% true on all older cars.
when the warranty runs dry , most folks end the service.
is that you?

if unlucky it 1% , it can be over 50 reasons.
we do the tests and not attempt to try all 50 causes and parts.

The best way to adjust the screen is to adjust the screen resolution until you get a correctly proportioned image.
First display an image such as a square or a circle on the screen.
Go to Control panel - Display - Settings tab and start with 1024 X 768 screen resolution adjustment
click Apply and the check your image.
Repeat the adjust screen resolution select the next highest screen resolution setting, repeat thia process until you get the best image.

Hi i'm Rain.
You can try a system restore to restore the icon.
This restore may also restore your drive to the state it was before the problem accured.

1. Click start
2. click all programs
3. click accessories
4. click system tools
5. click system restore

Follow the on screen instructions .
Pick a date before the problem accured then click next. allow the computer to restore its self.
when finnished the computer will reboot .
allow the computer to finnish restoration.
You will see a notice that system restore is complete. close and check to see if problem is repaired.

need more info. make? model? dlp or lcd? just by what you said, i'd say main board; but the more info provided, the more accurate the diagnosis.

tap and hold on align target until it moves to next corner or next step, if you are using windows 6 or 6.5 you should be very much accurate on taping and holding to align the screen.

http://www.notebookera.com/

The time on the phone system has been reset, but you must refresh your system.

1. Press menu button

2. Press the time/day button, which displays current time & day--wait for it to time out (in other words, the screen clears and returns to menu).

3. Press exit.

Repeat steps 2 & 3 to display your clock and check time.

THIS REFRESHES YOUR CLOCK TO THE ACCURATE, CELL-TOWER TIME.

Hi there within the envelopes and labels print function within MS Word you will be able to set the correct label and sizes. If this doesn't work then adjust the margins.

This problem is nothing to do with your printer as you are sending a command to it and the printer is doing what you told it to do. Check the settings first.

Thanks J