Question about GE Profile Spectra JGB910 Gas Kitchen Range
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
F0 - F1 - F7
Stuck keypad may mean relay is turned on.
Determine if problem is with the Key Panel or Control by:
1. Pushing CLEAR/OFF pad.
2. Disconnecting Ribbon Cable from control and waiting at least 32 seconds to see if Code recurs
If code recurs, problem is in the control. Replace control.
If code does not recur, problem is with the Key Panel.
Posted on Oct 20, 2007
SOURCE: ge oven profile spectra xl44
Welcome to fixya.
I'm Huuum and happy to assist you,
You asked, is there anyway to bypass the oven lock or bypass the self cleaning mode to get oven working?
Why do you need to do this?
If the door lock is stuck in closed position and preventing you from using the range?
You may free this by following this procedure.
Threat it like an error code.
This can reset the system.
Turn the breaker off to cut the power for 5 minutes.
Then restart the breaker and try the range.
It's like rebooting your computer when its acting strange!
Usually it corrects most problems!.
Or they are sometimes just a glitch.
If this does not remedy the problem, then the lock switch itself is bad and if you think you can bypass it then you may as well change it. Same labor!!.
Let me know how it works out.
Please remember to leave a rating.
Posted on Sep 25, 2008
SOURCE: Bake ignitor Location
Hi Kurt, welcome to FixYA!
In the diagram below, Part #28 is your ovwn ignitor. (See the red markings to highlight it)
It is located underneath the oven floor, and the floor should come out by removing the two screws located in the bottom rear of the oven cavity. Take out the racks, take out those two screws, and lift the oven bottom up from the rear, then disengage the front lip and lift it out. I hope this is helpful info and thanks for allowing us to be of service to you.
Posted on Dec 23, 2008
Hi I have a older GE that the oven won't light. It is a gas range that is electric ignited. The top burners do work but the oven will not light. Is it pricey to have this fixed?
Posted on Jun 08, 2009
Tips for a great answer:
Oct 03, 2010 | GE Profile Spectra JGBP90 Gas Kitchen...
Mar 09, 2010 | GE Profile Spectra JGBP90 Gas Kitchen...
Nov 22, 2009 | GE Profile Spectra JGBP90 Gas Kitchen...
Sep 30, 2009 | GE Profile Spectra JGBP90 Gas Kitchen...
Sep 15, 2009 | GE Profile Spectra JGBP90 Gas Kitchen...
Jul 24, 2009 | GE Profile Spectra JGBP90 Gas Kitchen...
Jun 29, 2009 | GE Profile Spectra JGBP90 Gas Kitchen...
Feb 09, 2009 | GE Profile Spectra JGBP90 Gas Kitchen...
Dec 03, 2008 | GE Profile Spectra JGBP90 Gas Kitchen...
Dec 02, 2008 | GE Profile Spectra JGBP90 Gas Kitchen...
83 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: