Status light have a Motorola H350 bluetooth. package says status light can be disabled, how is this done?

Putting H350 into Google gives me lots of links to the Motorola Bluetooth handset.
It's passkey is 0000.
If this does not answer your query, please advise.

Hi,
Turn your H350 on by pressing and holding the black "Talk" button on the side of your headset. Hold it until the blue status starts to flash. To turn the H350 off, simply hold the talk button until the headset turns off.

Pair your headset with your cell phone by entering into your cell phone's bluetooth menu--Menu > Settings > Connection > Bluetooth Link > Setup (see Resources below).

Put your Motorola H350 into pairing mode by holding the "Talk" with the device turned off. Hold the button until the status light on the side of your headset begins to flash, and turns back into a solid blue.

Back in your phone's bluetooth menu, choose the option to "Search/Discover" bluetooth devices. And when your phone recognizes your H350, select the headset and enter "0000" as the passcode.


Thank You

Motorola H350 is a Bluetooth headset device. Free yourself from confining wires and immerse yourself in music with wireless Bluetooth stereo headphones! You can comfortably enjoy your favorite music without messing with annoying wires!

To pair your bluetooth with your new phone...
Step one: make sure bluetooth is fully charged. While off, press down and hold the mulitifunction key on the bluetooth until light remains on.
Step two: put your phone in discoverable mode and click on add new device to search.
The phone will then find the bluetooth.

I LOVE YOOOU! OMG thankyouuuuso muchh

Holding both volume buttons for about 4 seconds shuts the blink off, but it comes back if powered off and back on again, making it hard not to look like a cut price extra from Dr. Who (Torchwood)

Within your phone you can remove the device. Enter your menu. Find connections. See bluetooth -enter, Device history-enter- select-your Motorola H350 is listed. Go to options and delete. All done. Have a nice day!
Please vote.........

The headset is fully charged when the light goes out. The two buttons on the side are for volume up and down. Press both at the same time and it mutes the headset.

1. SWITCH ON THE POWERBUTTON BTHS AND PRESS THE PUSHBUTTON FOR A FEW SECONDS UNTIL THE
LIGHT STOPS BLINKING.
NOW YOU CAN SEARCH FOR THE BTHS. AFTER SEARCHING PAIR IT ,PASSSWORD IS 0000.

you hold the button with the boom closed and as soon as the light stops blinking you realease the button and open the boom, the light should remain on and steady. promt your cell phone to find it and the code is 0000