Question about Computers & Internet

1 Answer

Incline stuck @ 10 but reads as if it's on 0 incline. doesn't want to decline

I was on the treadmill and it was as "10" on incline, the middle of one of the programs. It appears to be stuck at this incline. When you try to lower it by pressing the decrease incline, it begins to beep as it is shows that it is already at an incline of 0. I checked this site (I believe it was this site) on the weekend and someone stated that you need to calibrate (recalibrate) the machine but I can't find where it says this anymore. can someone help. thanks. (appears to be no excercise equipment expert - sorry).

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 39 Answers

I don't know what model you have, but on some treadmills in the front there is an adjustment by a t-bit screw for calibration. You may want to try and unplug it and have someone hold the incline button while you replug it. Sometimes the program gets a glitch and a fresh restart from being unplugged corrects it. If you could list your model and brand I could be more detail specific.

Posted on Aug 12, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Proform 590Qs treadmill stuck on incline


You've to check the incline and decline limit switches also the incline motor
If you wish to get some details about treadmill repair and service ; check the site linked here. Pull up older posts.
http://electro-medical.blogspot.com/

Sep 01, 2016 | Proform Exercise & Fitness

1 Answer

Incline stuck


Run the software calibration for fix it.go under the HOOD motor and follow the steps or use the owner manual
God bless you

Jul 26, 2013 | ProForm 775 CT Treadmill

1 Answer

My Tunturi j800 is stuck in the incline position. Other than that, it works great! How can I get it down? The screen reads that it's at 0% incline.


RUN THE SOFTWARE CALIBRATION FOR DIAGNOSE, TROUBLESHOOTING AND FIX IT.

2) you can lube the gear, shaft+ adjust the potentiometer+see the relais contact are clean it.

sincerely. God bless you

May 02, 2012 | Tunturi Exercise & Fitness

1 Answer

When starting my treadmill the incline just starts all by itself, all the way up, sounds like it would keep going if it could, then it declines, its stuck in this loop. the belt never starts and I cannot...


This sounds like the treadmill is running an incline calibration. It will run to fully inclined, then to minimum incline.
It should not do this every time you want to operate the machine, but they will do it automatically if the operation of the machine is stopped by the power being interrupted..

Jan 26, 2011 | HEALTHRIDER S600 Treadmill Motor Control...

2 Answers

My nordic track treadmill won't decline


My wife had the same problem with her treadmill. I turned the beast on it's side, and unscrewed the plastic casing that houses the motor, computer, and all the electronics to the treadmill. I unplugged the incline/decline motor. Then on the bottom of the treadmill the long threaded rod that causes the incline needed to be moved. So I unbolted it from the catch, and manually screwed the rod back in with a wrench. Now the treadmill works fantastically, of course the incline/decline mechanism has been disabled, but I would rather have a treadmill with the incline disabled than have one always on 100% incline. Hope you found this helpful :)

Jan 05, 2010 | NordicTrack Exercise & Fitness

1 Answer

Incline on treadmill is acting strange


Open the motor cover. There should be a service sheet in there.
Read Option 2 & try it.

May 12, 2009 | Proform XP 542S TREADMILL Drive Motor

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

247 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...