Question about Maytag MDB5100A Dishwasher

2 Answers

Indesit DI 620 dishwasher lights 2 and 4 flashing

Lights 2 and 4 flashing - can't start machine. This fault not covered in manual.

Posted by on

  • ms clueless May 17, 2009

    I tried this & surprisingly it worked, I dont have a cancel button, but pressed drain/off button.
    thanks

×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Lights 2 and 4 flashing - can't start machine. This fault not covered in manual.

Posted on May 30, 2010

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 71 Answers

You can reset it by pressing the following sequence:Push. heated dry, then Normal. twice. After press cancel

Posted on Apr 21, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have an hotpoint sdw60 dish washer that is flashing 2 yellow lights, these are numbers 5 and 7 (fast and dry 40c) and (delicate 50c) can anybody tell me what this means.thankyou


Hotpoint Indesit dishwasher flashing lights fault error codes ...

? 15:08
www.youtube.com/watch?v=FRLbrBPHcnE
May 3, 2015 - Uploaded by how-2-repair.com
http://www.how-to-repair.com/help/hotpoint-aquarius-fdm-dishwasher-flashing-lights-and-there-fault-codes ...

Oct 02, 2015 | Hotpoint Dishwashers

1 Answer

Indesit DI 450 fault codes


Hi,
Doyou have your Owner's Manual? If you do, look on page 11, your filter needs to be cleaned out.
First, unplug your machine, then take out your tray. Find the screws and remove coverings. That should take care of your problem, if you get it thoroghly cleaned! Let us know what happens!!

Jul 29, 2014 | Indesit Dishwashers

1 Answer

The wash light Indesit DI 67 dish washer is flashhing ?


Try pressing the start button in for 5 seconds, doing this cancells the old program and starts a new one.

Dec 12, 2009 | Indesit 24 in. DI67 Free-standing...

1 Answer

Indesit DI 620 which won't drain water


this appliance is a built in dishwasher and may have somthing jamming the pump,this can only be acessed from the bottom and may require the appliance being removed,also check that there is not a blockage at he sink.

Apr 19, 2009 | Indesit 23 in. DV62 IX Built-in Dishwasher

1 Answer

Indesit dishwasher DI 450 stops after 10 mins


my disher washer dls 535 starts programme then lights 2 and 3 start flashing and does not work

Nov 19, 2008 | Indesit 18 in. D41 Slim-Line Free-standing...

2 Answers

Indesit IDL40 Slim line


Pull the machine out and tip it carefully to one side, if water comes out from the base then the problem is the union on the upper feed pipe. Remove the top inner dish rack and twist the star shaped nut clockwise gently! Make sure you have got as much of the water out as possible, stand the unit back up and turn put it into cycle.

Apr 12, 2008 | Indesit 18 in. D41 Slim-Line Free-standing...

1 Answer

Indesit dishwasher


machine is flooded in base
means you have a leak in dishwasher
dismantle check feed pipe to top basked probable faulty feed pipe replace if so

Feb 23, 2008 | Dishwashers

1 Answer

Green light flashing


hello to all
i am in naples italy and just fixed my machine.
idl 600 second and forth light blinking after fill up and then it drains the water out.
this is a clogged filter alarm but if the filter is not clogged its the heating element bad.
the element has a thermostat that heats the water to about 90 degrees c.
in my case the element was burned open and checking this with a ohm meter it showed no resistance.
normally it should be about 100 ohms.
the mother board were the lights are does a check on all systems and if anything fails in this case the heater element then it goes into alarm and pumps out the water.
total cost here near naples italy was 28 euro for the heating element and i replaced it my self.
feel free to e-mail me if this is allowed at ralphcarlmagno@yahoo.com
hope this helps a lot of friends
ralph retired USAF


Feb 18, 2008 | Indesit 24 in. IDL500 Built-In Dishwasher

1 Answer

Indesit IDL40, 2nd & 3rd light flashing


It can also be that the pressure is too week. If you look a tthe manual it mentions this exact symptom. I know because i ve a similar issue. cheers

Dec 13, 2007 | Indesit 18 in. D41 Slim-Line Free-standing...

1 Answer

Indesit idl 705 Dishwasher


Having read another users fault (LUNNY) that has same fault. They got engr out and it was a blocked pump. Where is the pupmp located on this model as I have the same fault and want to resolve it asap.

Aug 24, 2006 | Indesit 24 in. IDL700 Built-In Dishwasher

Not finding what you are looking for?
Maytag MDB5100A Dishwasher Logo

2,171 people viewed this question

Ask a Question

Usually answered in minutes!

Top Maytag Dishwashers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Charles T Nevin
Charles T Nevin

Level 3 Expert

4070 Answers

Mike

Level 3 Expert

4340 Answers

Are you a Maytag Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...