Question about Kenmore HE2 Plus Front Load Washer

1 Answer

Kenmore heavy duty 80 serier washer belt came off dont know how to put it back on

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 15,935 Answers

For replacement parts - head on over to PartSelect.com or RepairClinic.com and enter in your full model number for a full parts listing.
I recommend both sites because ...


FixYa has no affiliation with either site - I have been using and recommending them for years - trouble free.

PartSelect has a great schematic database for locating the part on your unit and great "testimonials" for each part that often times includes HOW-TO information.
RepairClinic has pictures of each part they sell and also a great how-to and troubleshooting for basic repairs.


If your unit has never been serviced - there should still be an original service manual enclosed in plastic taped to the inside of the shell.
In the service manual are Error codes, maintenance procedures, and troubleshooting steps you can follow.


Anything too complicated or beyond your scope should be handled by a professional.

If you think you want to tackle the repair - and have gotten stuck on a step - reply to your question and I will be glad to help you out.




Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question##^^&$$#

Posted on Oct 01, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Is there a belt on a kenmore ultra fabric care heavy duty 80 series


No. What is the problem you are having? Let me guess, it's not spinning or agitating?!
What is the model number listed under the lid?

Nov 03, 2012 | Kenmore 24032\24036 Top Load Washer

1 Answer

I have an old kenmore washer, on which I cannot find the model number. It needs a new drive belt. The only information that I have is that it is marked as a Kenmore Heavy Duty 80, and inside the door is...


Go to a local Sears or Whirlpool store and tell them you have an old "belt drive" Kenmore washer that needs a new belt. All of these were built by Whirlpool Corporation and I believe used a common belt.

Good luck.

Mar 25, 2011 | Washing Machines

1 Answer

Kenmore heavy duty washer leak oil out while putting belt on where do I put oil in at and what kind of oil


It sounds like your tansmission seal is leaking. I don't know of any washer you put oil in.

Jan 06, 2010 | Kenmore 23822 Top Load Washer

1 Answer

How to install belt on kenmore 80 series heavy duty washer


Please see the following, this should help.

http://www.american-appliance.com/catalog/newsdesk_info.php?newsPath=16&newsdesk_id=144&osCsid=d2b8394d06bc35392915545cfaf1e677


Dec 09, 2009 | Kenmore Washing Machines

1 Answer

Kenmore washers, heavy duty 80 series, no spin


Hello, Your problem is going to be with your lid switch, this is located normally either in the control panel or about half way down on the right side under the lid. This is a safety feature to stop you opening the lid while the machine is in a high spin. Once you have located the switch trace the wires back to the wire harness in the control panel. Disconnect the lid switch from the wire harness and with an ohms meter check for condinuity on pin 1 & 3 (the 2 outside pins not the middle this is a ground) You should find you have no condinuity and should replace this switch. If you have any other questions or concerns please feel free to comment again. Good Luck!! Mike

Oct 14, 2009 | Kenmore 24032\24036 Top Load Washer

1 Answer

I bought a used Kenmore Series 29821 Heavy Duty 80


Should be a drain pipe, so you dont have to pull out your exit hose from the standpipe behind by shifting your washer. But this has to have a good stopper. It is usually concealed in the front behind the panel.

Mar 26, 2009 | Fisher Paykel EcoSmart GWL15

1 Answer

Kenmore series 80 washer only works on heavy duty cycle.


bad transmission,,check voltage...below 110 with load and water pressure switch or hose defective..

Dec 24, 2008 | Kenmore 24902 Top Load Washer

Not finding what you are looking for?
Kenmore HE2 Plus Front Load Washer Logo

124 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Sal DeAngelo

Level 3 Expert

2180 Answers

fordexpert

Level 3 Expert

5520 Answers

Ed Mac

Level 3 Expert

731 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...