Question about Bushnell Velocity Speed Gun

1 Answer

Dropped my bushnell 1500 Mode button will not work and cannot get

Dropped my Bushnell 1500 Now mode button will not work and I cannot get a reading of any type.

Posted by on

  • shar4par Apr 21, 2009

    I should have specified that the Bushnell 1500 is a PinSeeker

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

  • Expert
  • 133 Answers

Try this...while holding your thumb on the battery door, shake the unit a little....if you hear a rattle, then a lens has broken off...(rangefinder is dead) If it doesn't rattle then you have knocked it way out of alignment. It might work on a STOP sign (because its reflective) but nothing else. Send it to bushnell for repair.

Bushnell Repair Center
8500 Marshall Drive
Lenexa, KS 66214

Send $10 for return shipping and handling.
Explain your problem.


Posted on Apr 24, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Blurred numbers on Bushnell range finder.What's the problem?


Bushnell V3 display question - Toronto Golf Nuts - Greater Toronto ...

www.torontogolfnuts.com > Golf Discussion Forum > Golf Gear & Equipment
Apr 8, 2014 - 22 posts - ‎3 authors
Bushnell V3 display question Golf Gear & Equipment. ... When I start it, the numbers are clear but it does not stay like that the whole time. ... Yea I used that and turned all the way counterclockwise (all the way clockwise was very blurry). .... to read and drive and has a real problem using my rangefinder.

Bushnell blurry display Rangefinders Questions & Answers (with ...

www.fixya.com > Forum > Tags > blurry display > Rangefinders display the display appears but does not display yardage Here is the link to the instruction manual if you need it; ... Sight target needs adjustment When i look ...

DIY Fix For A Malfunctioning Rangefinder On The Cheap

fardevice.com/diy-fix-for-a-malfunctioning-rangefinder/ 4 Common Malfunctioning Rangefinder Encountered (and How to Fix Them), or blank ... Bushnell Tour V3 Jolt Standard Edition Golf Laser Rangefinder .... This could be rooted to a blurry focus lens or laser output, so it's really important to ...

Bushnell - I am having difficulty seeing through my scope, all images ...

bushnell.com/global/customer.../i-am-having-difficulty-seeing-through-my-scope,-al I am having difficulty seeing through my scope, all images seem blurry. How can I properly focus ... What battery does my rangefinder take? All my pictures are ...

Bushnell Golf - Bushnell Golf

bushnellgolf.com/ The undisputed #1 Laser Rangefinder in golf ... Bushnell Tour Domination. The #1 Rangefinder in Professional Golf For Over A Decade. Learn More. The #1 ...

Bushnell Tour Z6 Laser Rangefinder - Review - MyGolfSpy.com

https://www.mygolfspy.com/bushnell-tour-z6-laser-rangefinder-review/ 6 posts - ‎4 authors
The Final Contender In The Rangefinder Round Up: The Bushnell Tour Z6 ... Our second entrant is the Callaway RAZR Rangefinder dropped a .... I have near perfect eyesight, but when target is clear, number is blurred and vice ...

Blurry vision Range finders - GPS/Range Finders/Mobile Apps - GolfWRX

www.golfwrx.com > ... > Equipment > GPS/Range Finders/Mobile Apps May 14, 2015 - 5 posts - ‎5 authors
What causes a range finder to have blurry vision through lens? Im looking to purchase a used Bushnell tour v2 in a couple minutes and I've ... Which Laser Rangefinder
24 posts
2 Aug 2014
Pro 1M Slope = Bad, Bushnell = Good
22 posts
1 Aug 2013
Problems with Bushnell Pinseeker 1500?
28 posts
24 Jan 2009
More results from www.golfwrx.com

Jan 07, 2017 | Bushnell Optics

2 Answers

Bushnell range finder #200800 dated 5/97


http://bushnell.com/manuals/rangefinders/20-0880_YP_Compact_800.pdf

Jun 28, 2010 | Bushnell Yardage Pro 800 Compact...

1 Answer

I dropped it in a lake. it has water inside and of course does not work. What happe


If your rangefinder sez "WATERPROOF" on the on it.....Send it in and you will get it repaired. No cost to you.

Bushnell Repair Centre
8500 Marshall Drive
Lenexa, KS 66214

or call 800.423.3537

MTG

Jun 21, 2009 | Bushnell PinSeeker 1500 20-5103...

1 Answer

The unit I have has stopped giving me readings. When I look through the viewfinder, I see the pin but there are no distance readings. Depressing the button on top doesn't work.


Bushnell will honor the warranty if the unit doesn't look like its been dropped. The warranty on these units is two years. If everything is kosher....then sent it in. They will replace it with a new one. You can go to their website and get all the service center info. They will ask that you send in 10 bucks for return shipping.

mtg

Jun 01, 2009 | Bushnell Tour V2 Pinseeker Laser...

1 Answer

Bushnell 1500 pinseeker with slope+/- to go from M to Yards


Hold down the "MODE" button until the "M" starts to flash......touch the mode button again till the "Y" flashes........then touch the "FIRE" button on top.....(square button) Then it will be set to read in yards....not meters.

mtg

May 16, 2009 | Bushnell Pinseeker 1500 Rangefinder

1 Answer

I cannot get anyu distance information; the display is blank. Where can I sent it in for repairs??


Your best bet is to go to; www.bushnell.com or call them at; 1-800-423-3527, they should be able to assist you as they stand by their products.
Good luck. :)

May 04, 2009 | Bushnell PinSeeker 1500 20-5103...

1 Answer

My pinseeker 1500 reads the same distance no matter what the distance really is. Has new batteries. Could it be out of alignment? ROB


If it's reading the same no matter what you shoot at, the problem is the cpu board inside has lost its programming. Bushnell can reprogram it for $20.00...If you've dropped it a few times it might need an alignment.$50 If you don't use the eyepiece cap....(you got those little oily looking wiggles in the display) you will need a LCD too..$15

MTG

Apr 23, 2009 | Bushnell PinSeeker 1500 20-5103...

1 Answer

Will not turn on at all.


your unit has a broken battery holder. The batttery is not touching the contacts. When you dropped it you more than likely knocked the unit out of alignment also. Send it in to Bushnell for repairs

Dec 26, 2008 | Bushnell PinSeeker 1500 20-5103...

1 Answer

Don't know what the ''Mode'' button is used for? Thanks


This mode hones in on the flag. Click it off when you are measuring distances to a bunker, tree, etc.

Nov 23, 2008 | Bushnell Pinseeker 1500 Rangefinder

1 Answer

Bushnell Pinseeker 1500 Laser Rangefinder


All these units need an alignment....Vibration and dropping are slow death to Pinseekers.

Jul 18, 2008 | Bushnell Pinseeker 1500 Rangefinder

Not finding what you are looking for?
Bushnell Velocity Speed Gun Logo

261 people viewed this question

Ask a Question

Usually answered in minutes!

Top Bushnell Baseball & Softball Experts

NOEL
NOEL

Level 3 Expert

7485 Answers

kakima

Level 3 Expert

102366 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14380 Answers

Are you a Bushnell Baseball and Softball Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...