Question about LG WFT1071TP Top Load Washer

1 Answer

LG wft7014pp wont drain rinse nor spin

After a wash cycle the machine just quits working. I have tried spinning an empty drum and that works perfectly but as soon as I put a load it ceases to work. I have opened the drain pipe and cleaned some blockage but that has not solved my problem.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert that got 5 achievements.


    An expert who has written 2 tips or uploaded 1 video tip.


    An expert who has answered 20 questions.

  • Contributor
  • 62 Answers
Re: LG wft7014pp wont drain rinse nor spin

Do you have a drip-dry this cancels the spin cycle unless you select it yourself

Posted on Jan 03, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Oko 72630. Why is it stuck on rinse cycle?

Could be several reasons:
- Selected the "Night cycle" program (means standing with the drum full of water, reason: too much noise in the spin cycle)
- Set to the "Rinse hold" (means standing with the drum full of water, reason: wrinkles on the clothes)

According to your description I think that this is not a failure otherwise error E20 will be appears on display.

Once the washing programme has come to an end, END illuminates on the programme progress display.
If RINSE HOLD was selected, the display beside the START/ PAUSE button flashes.
1. After a rinse hold, the water must first be pumped out:
- Either press the START/PAUSE button (the water is pumped out and the washing is spun according to the completed programme;
After the START/PAUSE button is pressed again, the spin speed can still also be changed during spinning), or
- Turn the programme selector to PUMP OUT and press the START/PAUSE button (the water is pumped out without spinning),or
- Turn the programme selector to SPIN or SHORT SPIN and press theSTART/PAUSE button (the water is pumped out and the washing is spun or gently spun).
At the end of this programme step, the END indicator will illuminate.
2. Open the door.
As soon as the DOOR indicator lights up green, the door can be opened.


Aug 15, 2015 | AEG Washing Machines

1 Answer

Machine worked fine to start with . Then stopped. Will fill water but drum wont turn on a wash cycle. And wont spin on spin cycle.But Belt seems fine. Can you help.

The pump needs to be replaced. The pump controls the agitation for the wash cycle, also controls the tub for draining & spinning after the wash & rinse cycle. The belt has nothing to do with it. Pump is very simple to remove & replace, and not too expensive, it's plastic.

Jun 03, 2015 | Washing Machines

1 Answer

AEG Lavamat 74689 Update wont pump out

Possible that the program timer is faulty as it fails to switch on the pump in the required sequence. You can clean the contacts, check the power to the pump, trace the pump power line to the timer which can confirm the case. In such cases the timer must be replaced.

Jan 02, 2013 | Washing Machines

1 Answer

Keeps flashing SE

I recently had this happen but with no error message on my model, the rinse symbol just kept flashing and nothing was happening. I tried running a spin cycle or rinse and spin. The rinse & spin started but stopped when it got to spin. I finally determined that the water was not draining out. I ended up emptying a bucket and a half of water out of the emergency valve near the floor (which spills water everywhere) and found a lint ball that was plugging it. After this I tried running just a spin cycle and it worked.

Mar 30, 2009 | Samsung Washing Machines

2 Answers

Machine fills and agitates, but won't drain

Please empty your machine and run the machine empty. If the washer goes through the whole cycle without any clothes. Please let me know

Jan 19, 2009 | Kenmore 24032\24036 Top Load Washer

1 Answer

Wont drain, wont empty, wont go onto rinse, drain or spin during

The filter on this machine is behind the flat at bottom right of machine. Tilt machine back before unscrewing to avoid spillage. If filter is clear get back to me and will explore other possibilities.

Nov 16, 2008 | Washing Machines

3 Answers

LG Top loader not draining water to rinse and spin


Jun 09, 2008 | LG WFT1071TP Top Load Washer

2 Answers

Bosch classixx 1000 washing machine - stops on spin

Washing machine stops at the spin cycle - light flashes. Have to drain water out manually. Happened last week and was then able to run an empty rinse cycle. Machine worked normally for another week. Same problem today but have had to drain water manually from the drum after trying an empty 90 wash and rinse cycle (both stopped on the Spin and flashed). Any ideas? Thanks. x

Apr 29, 2008 | Bosch Classixx WVF 240S Front Load Washer...

1 Answer

LG WD-8013F wont spin

Hi deppgirl,
I checked the lint filter at the front bottom left hand side and it was full of junk.  Once emptied it worked a treat.  Pull the flap down and turn the large knob anti-clockwise and pull to remove.  Good luck.

Mar 29, 2008 | Washing Machines

Not finding what you are looking for?
LG WFT1071TP Top Load Washer Logo

638 people viewed this question

Ask a Question

Usually answered in minutes!

Top LG Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a LG Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides