Question about NewAir ACP-1000E Portable Air Conditioner

1 Answer

The unit turns on but the fan won't blow. Is it the fan motor?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 374 Answers

Hi! there,
well,if you think the unit turns as well as the compressor is running,no blowing of air,blower and fans are coupled at this type, if you hear hamming of blower fan,the capacitor is not working or theres no supply source on starting circuit.check capacitor disconnecting it besure switch breaker is off ,check performance using multitester,on resistance attached test rod to the two terminal of capacitor and tester set to 100k,if tester pointer deflect,then reverse the polarity of tester if deflect and sudden the pointer going back to original position,capacitor is good.if not go back the capacitor is busted,if not deflect its also defective.replace capacitor,have a nice day

Posted on Apr 21, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Fan started blowing on a/c won't turn off


If the blower motor runs in the off position, check the fan relay.

Aug 23, 2012 | 2008 Nissan Rogue

1 Answer

Chevrolet Suburban Fan Won't Blow


check ac control unit if you replaced blower module and if your sure fan works

Jul 09, 2012 | 2005 Chevrolet Suburban 1500

1 Answer

Heater won't blow


Check your blower motor resistor connection.Turn switch and fan on then wiggle the resistor pigtail fan should turn on if not replace resistor.These get to hot and usally melt the pigtail and loose their connection.

Jan 13, 2012 | 1998 GMC Savana

1 Answer

The compressor is working fine as well as the unit, but the fan isn't turning, therefore no cold air is blowing out.


What I would do is yank the innards out and look for signs of why the motor won't turn. I would oil the motor using zoomspout oil. If it is original to the unit and the compressor is ok I would say the capacitor is fine. If it is a replacement fan motor already in there take a look at it's replacement cap. They swell up and fail. Look for trash jamming the motor blade, or the motor mount itself could be broken . Usually their are 3 motor mounts. It only take one motor mount broken to bind up the motor.
themobilian_2962.jpg

Sep 04, 2011 | Fedders Heating & Cooling

1 Answer

I HAVE A CARRIER CENTRAL AIR, THE OUTSIDE FAN IS BLOWING INWARD AND WON'T SHUT OFF WHEN THE FURNACE SHUTS OFF AFTER TEMP IS REACHED


Check the t-stat to make sure that the "fan" switch is st to auto. If not the fan is in the "on" position and is always on. Otherwise, It sounds like your "Central Air" is a packaged unit(Furnace and air all one unit outside the home) and the fan relay inside the unit is stuck. This need to be replaced. It is the rectangular unit with the leads from the fan motor attached to it.

Jul 29, 2011 | Heating & Cooling

1 Answer

Heating works fine...The air conditioning compresser out side comes on and the fan works..But the inside fan won't come on to push the cold air??


Good observations-- let's see if we can go a bit deeper now-

Yes-- You have to have the inside air fan working,-- in order to blow the COLD air at the coil-- into the room.
So-- Can you trace the wire back from the motor to a terminal block, or remove the terminal block cover, and measure some voltages?
Is the wire into the motor, reading line voltage (120Volts-- or 240 volts-- what is the plus that the unit is plugged int, supplying?)

No- Voltage-- No Fan!-
If you have voltage-- but no fan turning:
Is the shaft frozen?-- can you spin the blade wit your hand?

How old is the unit?-- and has the fan motor worked recently?

Help me help you get to the next trouble shooting point-
Mack B

Jul 04, 2011 | Heating & Cooling

1 Answer

My Coleman Evcon heating and air unit will not blow air


bad blower motor. recommend a new blower motor and capacitor.

May 28, 2010 | Coleman Heating & Cooling

1 Answer

I have goodman CKL49-1, air is not blowing, the


Your evaporator fan motor has quit. You need to find out if it is a relay or the fan motor. These systems come in various different setups. Updraft (vertical) or lay down (horizontal) you have to gain access to the motor and get it out. Turn off all power to the unit, look for any breakers at the panel. open the panel usually the same panel to access the filters. The motor and squirrel cage fan, will come out as one. look closely for rails at the top to slide the motor and cage out. Your wiring should unplug from the top close to the capacitor. you then can unbolt the motor - take pictures so you can reassemble it. Take the motor to a local HVAC store for a match. Be sure you get a new capacitor to go with the new motor.

May 04, 2010 | Goodman CKL36AR36 Air Conditioner

2 Answers

Blower motor wont start


Every air conditioner is equipped with at least two motors, the compressor and the fan motor. It is possible for the fan motor to be defective and the compressor to be running. If this is the case the unit will appear to be running and may even sound "normal" but no air is blowing out the front or back of the unit. If, after removing the cover of the unit you discover the fan blade is very stiff and difficult to rotate, the fan motor should be replaced. If the fan blade turns freely the circuit powering the fan motor will require electrical troubleshooting. It may be necessary to have a qualified technician locate the cause of the problem, which may be either a problem with the capacitor, the selector switch or the motor itself.

Jun 06, 2009 | Goodman CKL42AR42 Air Conditioner

1 Answer

Fan Stops blowing air


Isthis a window unit? It sounds like it. There could be a problem with your fan switch or the fan motor itself? Multi-speed motors can lose one speed at a time. It really sounds like the fan motor is bad. If the compressor starts in the cool mode, and the fan doesn't, the fan motor could be locked up. See, if you can spin the motor by hand? If you can, then something is bad within the motor. Now, if the motor has a capacitor, check for a loose or burned wire. Good luck.

May 18, 2008 | Maytag Heating & Cooling

Not finding what you are looking for?
NewAir ACP-1000E Portable Air Conditioner Logo

495 people viewed this question

Ask a Question

Usually answered in minutes!

Top NewAir Heating & Cooling Experts

Donni Steen

Level 3 Expert

659 Answers

L Pfaff
L Pfaff

Level 3 Expert

11573 Answers

Tom Chichester

Level 3 Expert

33282 Answers

Are you a NewAir Heating and Cooling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...