Question about Canon Office Equipment & Supplies

1 Answer

ERROR MESSAGE SAYING CHECK 5100 - Canon Office Equipment & Supplies

Posted by on

  • nina424 Apr 21, 2009

    Thank you so much for the advice!

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 385 Answers

Hi,
Check your cartridges are good, must be sat correctly.

check that the timing strip is in the center

1. clean **** strip film
2. clean **** strip film sensor
It is located at the back of head carriage, use a contact cleaner.

check something is not blocking the carriage.( usual suspect )


To reset
1. Turn off printer
2. Hold down Resume button and press Power button.
3. Keep holding down Power button and let Resume button go.
4. Press Resume button 2 times then let BOTH buttons go.
5. Green lights will flash and then stop blinking.
6. When green lights are solid, press the Resume button 4 times.
7. Press the Power button and the printer should turn off, if not,
press the Power button once more.
8. Your printer should respond as normal..
Or, press reset( or resume) button 4 times then power.

Hope this helps
Regards
Richard.

Posted on Apr 21, 2009

  • Richard Finney
    Richard Finney Apr 21, 2009

    No problemo



    Hope it helps you



    Regards

    Richard.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Fax-jx201 check 5100 problum


my fax machine FAX-JX201.what is the check 5100 error message.

May 19, 2012 | Office Equipment & Supplies

1 Answer

I get an error message on startup on my Acer Aspire 5100, it says Realtek RTL8139(x)/8130/810x PCI Fast Ethernet Controller v2.13 (020326) PXE-E61: Media test failure, check cable PXE-M0F: Exiting PXE...


It is beacuse your Hard drive is not detected on the computer properly.
Try resetting BIOS.
If that doesnt work, Check whether your hard drive is good.

Nov 28, 2010 | Acer Aspire 5100 Notebook

1 Answer

I have an error code 5100. It started grabbing the paper wrong and a piece got jammed. I removed it and then it says error 5100. I have turned it off and on a few times and it is still there.


This error message is displayed by the printer when paper is jammed in one or more locations. In such a case, users are recommended to remove the jammed paper from the specified location. The entire paper path must be checked for any pieces of paper. To stop the message, open and close the top most cover of the printer. Lastly, verify the flags and the sensors. If the problem persists, the cause of the error message could be a broken sensor or sensor lever.

Nov 04, 2010 | Canon PIXMA MP470 All-in-One Printer

1 Answer

Check printer 5100 error message.


error code 5100 means print head temperature rise error. In other word the print head is overheated. First,turn off your printer for some minutes (it recommended to take about 30 secs or more) and let it's cooled down. Turn on again. If the problem still persist,try to check whether the print head is good or not by comparing with another print head. Be carefully,sometimes this problem is caused by short circuitry inside the print head.

Jan 03, 2010 | Canon PIXMA MP530 All-In-One InkJet...

1 Answer

Canon i255 printer error 5100


5100 is a carriage error. check the timing strip for contamination (plastic strip about 1/4" in width). Check for obstructions.
more information on this error can be found at http://www.fixyourownprinter.com/forums/laser/25975

Jul 12, 2009 | Canon MultiPASS F60 All-In-One InkJet...

2 Answers

I get ERROR 5100 message for my i350 printer...of course it will not print. How is this fixed? Please help.


I had the error code 5100 for my canon pixma ip6220d printer and all it was a pen in the track of the cartridges. I've been looking for that pen for awhile too. So I would say look for something in the way of the cartridges. Hope this helps everyone.

Aug 03, 2008 | Office Equipment & Supplies

1 Answer

I850 printer error message 5100


GO ONLINE AND TYPE IN

CANON 850i PRINTER ERROR MESSAGE 5100

ENTER

ROD

Jun 19, 2008 | Canon i850 InkJet Photo Printer

1 Answer

Rundll error message


What type of Lexmark did you uninstall? When you review your add/remove programs, is it still there?

Feb 09, 2008 | Kodak EASYSHARE 5100 All-In-One Printer

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

106 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

old marine
old marine

Level 3 Expert

1985 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...