Sharp 42In when I'm watching a sports channel the scores on the bottom or top are cut off. Ive tried to change view mode, but that doesn't seem to work

does the remote have a mode button on it?

my 55 sanyo can be changed with the remote

my remote says pix shape on it

Just called Sony about this same problem...taking your CABLE BOX remote, push the # key on the bottom right of the remote (it also says HD Zoom on mine). You can cycle through 4 or 5 zoom options...make sure you are on an HD channel to see the changes. :)

Change the video output to wide screen

change aspect 

It sounds like you're watching wide screen content on a 4:3 tv, so the screen may be zoomed in so that the bars that would normally be on the top and bottom are not showing. Because the picture is zoomed in, images that would be at the top and bottom are off the screen. If you're watching from a home receiver (Uverse, DirecTv, Xfinity, etc.) you need to change the video settings to let the receiver know that your TV's aspect ratio is 4:3 (full screen) and not 16:9 (widescreen). Also, if your channel lineup has the option of watching CNN on a standard definition channel, that would also help because the shape of the image would be what your tv was designed for. If you watch 16:9 programs, you will have to choose letter box mode (bars on top and bottom because the shape of the widescreen image does not match the shape of your tv), pillar box mode (bars on either side) zoomed, or stretched. Stretched will make the shape of everything appear distorted, as it squeezes a widescreen image on the sides to make it narrow enough, so that everyone will have tall and skinny heads like an old Kung Fu movie. The sharpest picture would likely be to watch 16:9 (hi def) content in letterbox mode (bars on top and bottom) so at least you get the proper aspect ratio that the sports were recorded in, and it comes from a sharper source (HD vs SD). I would just deal with the bars, because even with a widescreen tv, there will sometimes be bars because that's how programs are sometimes recorded, for different visual impact or cinematic effect.

If you need further help, I’m available over the phone at https://www.6ya.com/expert/reginald_bec291de192ca44f

Try changing the "aspect raio" or "view mode" for the TV. It seems like you are in a panoramic mode

Look on your remote and see if there is a "Format" button, press this to cycle through the different format options, and find one that fits.

If there is not a Format button on your remote, try looking in the setup menus and see if there is an option for formatting or zoom.

Try your setting on your cable box (Screen position)
also maybe wide mode try switching to wide zoom good luck

Download the service manual and you'll find that there's a service mode that allows you to adjust convergence. Also, there's some adjustment knobs behind the right front speaker assembly

skilled,senior tech needed to access servicer mode and check/adjust geometry/convergence. if unresponsive,then replace convergence and re-check geometry and alignment.