Question about ASUS AAM6010EV Router

1 Answer


I couldn't find quick setup page for the first connection

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

Gud day, could you tell me the ip address of your asus router the i suggest you a solution

Posted on Sep 24, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

D-Link DSL-2750U N300 ADSL Modem Wireless Router configuration with Hathway


Nov 21, 2012 | D-Link ADSL2/2+ Modem/Wireless Router...

1 Answer

Show me how to connect linksys wireless


The Router configuration is not that much difficult, only few thing you have sure,
1) Correct ADSL Connection User name & password,
2) Chose unique ip address in All host.

Follow the mention bellow instruction to configure and connect to Wifi Router,

  • Plug the network cable ( Mine was Blue ) which comes with the Router Box pack to your computer. The other end goes into any of the Router Ethernet Port ( 1 or 2 or 3 or 4 )
  • Now type in in IE or Firefox or any browser. You will prompted for password which is admin. You must be logged into Linksys Router.
  • Now since your ADSL modem is also having the same IP , we will change the IP address for WRT54G2 Router to
  • Under Setup >Basic Setup look for Network Setup and Change Router IP. Change to and Save changes.
  • Since the IP has changed you will need to close the Browser.
  • Sometimes the IP doesnt change automatically. Do a IPCONFIG / RELEASE and then IPCONFIG / Renew

Making WRT54G2 Router talk to ADSL broadband modem
  • Plugin the Ethernet cable which comes from the Modem into the port on Wrt54g2 router which says Internet.
  • Open Internet Explorer and Type in
  • Type in same password ( admin )
  • You will be in Setup > Basic Setup
  • Take a look at Section , Internet Setup. The current selection should be Automatic Configuration DHCP. Select Static IP instead.
  • Add following details to it. In the first step we backed up All the IP configuration. Use them here
Internet IP Address: . . .
Subnet Mask: . . .
Gateway: . . .
Static DNS 1: . . .
Static DNS 2: . . .
Static DNS 3:

ADSL Modem Settings to Wrt54g2 Router

  • Once Done just save changes and you should be back at same page.
  • Now try to connect any application which talks to internet. You should be able to connect
Configuring for Wireless Connection :Now once your Router is talking with Modem, it is pretty easy to connect on Wireless. The only thing we need to setup here is Security. Lets get WIFI
  • Get to the Lynksys page again. Do all login and regualr stuff.
  • Now look for menu Wireless, click on it. You should land on Basic Wireless Settings.

Basic Wireless Settings

  • Select wireless configuration to Manual .
  • Wireless network mode to Mixed.
  • Give a Wireless Network Name (SSID), make sure its unique.
  • Make Wireless channel selection 11 ( 11 - 2.463 GHZ)
  • Select Wireless SSID Broadcast to Enable
  • Save Settings and you will be back at the same page with changes you made.
Now Lets secure the Router :
  • Go to Wireless Security on the same page.
  • You will need to configure here Security Mode : WPA Personal, WPA Algorithms: TKIP
  • WPA Shared Key is what you will need when you connect to your router without wire. This key does the authentication and keep unwanted people away. Add 8 digit alphanumeric key.
  • As suggested in comments, there is a new mode which you can use : WPA2 with AES
  • Save changes.Just make sure you save that key to a notepad or remember it.

Wrt54g2 wireless security

  • Now last step, Move to next menu Security > Firewall .
  • Uncheck Block Anonymous Internet Requests .
  • Save Settings.

Wrt54g2 firewall settings

  • Remove the blue cable which you had connected with Router.
That's it. Now just turn on your WIFI and Search for the router. The name should be visible. Click to connect. At this stage it will ask you for the Password or Shared Key which we configures just above. It will connect and you will be able to connect to Internet.
That's all Folks. This is how you connect WRT54G2 Linksys router with Adsl Broadband Modem. If you have any questions feel free to comment.

Aug 03, 2011 | Linksys WRT54G2 Wireless Router

1 Answer

Hello. I've setup a LAN of 2 computers, a router and a ADSL modem at home, but when I plug both computers to the DLink 524 router, all the lights become less bright and I can't connect to the router, even...

reset set the modem first. then connect the one system to adsl modem. type in browser. enter user name&password.go to interface setup tab-internet--select bridge mode--save and reboot. now remove that take router connect to system type in browser. enter user name&password.go to interface setup or advance setup in that wan tab or internet tab select dynamic ip and lan page give different network address eg- for router,, save and reboot it will work or just call 08041478653 , 9740575949

Feb 25, 2010 | D-Link AirPlus DI-524 Wireless Router

2 Answers

I need to complet my router setup

Have you secured your Linksys from unauthorized access?
The encryption code protects your wireless router from unauthorized access. The wireless card in your computer/laptop needs to be configured with the router's encryption settings before the computer/laptop can access the router.
For details on configuring the wireless router and the wireless card, please click on this link and follow my instructions :-

Jan 06, 2010 | Linksys Wireless-G WRT54G Router

1 Answer

How to install and will this box allow my desktops(2 of them ) to both be connected to a wireless network?

There are 2 ways to setup Netgear
1. Setup Wizard (which guides you through a setup wizard)
2. Manual Configuration (you need to put all values in router manually)

Here we are not discussing Setup Wizard as Manual configuration is far much easier then auto configuration

To configure (config) Netgear we need to get into router page
To open router config page
1. Open Internet Explorer (Start>>all prog>>Internet Explorer)
2. Type in address bar
3. In username box type admin (where it says gateway requires username & password)
4. In password box type password (word password itself)
After this you will find Netgear ADSL Wireless Router Setup page

Here we need to select Basic Settings (as shown below)

after this you will find next page as


Here in this page (Basic Settings Page)

Does your internet connection requires login, Select Yes
Select Encapculation as PPPoE
Login is Username as provided by your ISP
Password is your password for broadband connection as provided by your ISP
Keep Idle timeout as 0

after this simply press apply without changing anything else

Now We Need to click on ADSL Settings Page

Now on ADSL Setting Page We got only 3 options

Multiplexing Method Should be LLC-Based
VCI 35

now just press apply again

By this time your router should be only (you can check it by opening any website on Internet Explorer or by router status option on netgear page)

To Config Wireless

Click on Wireless Option (on left hand side blue panel)


It should display next page as


Here in this page

Wireless Network Name (SSID) Alpha-Numeric name which would be displayed as your wireless network name

Region Here Select Your Region

Channel: Select whichever channel give you best sighal (9, 11, 13 are recommended)

Keep the TIck on Enable Wireless Access Point

Keep the Tick on Allow Broadcast of Name (SSID)

Can Untick Wireless Isolation

Then Jump to Security Options

Select WPA-PSK (Wi-Fi Protected Access Pre Shared Key)

then in WPA-PSK Security Encryption type in anything of your own choice but alphabets and numbers both should be there and make it between 8 to 63 characters long.
WPA-PSK Security Encryption Key is your password for wireless network

Now Press Apply and your router is ready for wireless too

After doing this you can change MTU (Maximum Transmit Unit) size to 1400 from WAN Setup Option

You can find WAN Setup Option in same blue panel on left hand side of screen


Here you just need to change MTU to 1400 and need not to change any other setting


Now its all done and router is ready to send wireless signal to your system/laptop

Nov 26, 2009 | NetGear WGR614 Wireless Router

1 Answer

How to instal D-link

Read the "Quick Install Guide" that came with the router.

Or, connect an Ethernet cable between your ADSL/Cable modem to the 'WAN' port on the router.

Connect another Ethernet cable between LAN port #1 on the router and your computer.

Turn the router on.

Restart your computer.

Click Start
Click Run
Type CMD and press ENTER
Type IPCONFIG and press ENTER
Look for a line like:

Default Gateway . . . . . . . . . :

Start Internet Explorer.
Type and press ENTER.

Login to the router's web-interface.

Run the "Wired Setup Wizard".
Run the "Wireless Setup Wizard".

Nov 16, 2009 | D-Link DIR-655 Wireless Router

2 Answers

Asus WL 520gu can't connect internet

1, connect your wireless router with cable to your laptop,
2. Login into your Asus-WL520gu and setup your wireless how you want it to run." do not bother with putting your username settings in there"
3. In your Asus-WL-520gu after setting up your wireless turn the DHCP off in it.
4. Now connect the cable that you have connected to your laptop to your router instead of your laptop.
""You should now be able to connect to the wireless with your settings. and connect anything ells you want to the other 4 ports on the back of you wireless router"" note: do not connect anything to the WAN port as it is used for DSL modems; and not Routers with ADSL modem.
when connecting a router to a router - the one that is connecting you to the internet needs DHCP turned on because it is the one that will be giving you IPs and Gateway settings - the other router such as wireless router after setting it up needs its DHCP turned off - other wise you will have 2 routers trying to do the same thing with ip's and gateways. And you should never connect a modem router to the WAN port as it is a modem router and NOT just a DSL-modem. The WAN port is intended for DSL-modems only. Not only consumers but also many technicians make that mistake

Aug 23, 2009 | ASUS WIRELESS ROUTER |WL-520G - RT...

1 Answer

Connecting 2 routers (ASUS WL-500W and D-Link DSL-G604T Wireless)

This will give you a "Double NAT" setup. Meaning, Your D-Link router is connected to the external internet address assigned to you by your internet service provider. More than likely this is a DHCP address you do not control. Your D-Link router is then translating the address to the 192.168.1.x network. This is the first NAT translation. You are then connecting the ASUS router to DLINK, causing a second NAT translation. (Internet ADSL --> D-Link WAN Port --> D-Link Lan Port --> ASUS WAN Port --> ASUS Lan Port to computer/server/etc. ) If both of your routers are giving out DHCP addresses, then this is all that is required.

Nov 22, 2008 | ASUS WL-500W Router (WL500W)

1 Answer

Cannot through ASUS WL-530G connect to internet

I've settle my problem. Set the correct VPI and VCI provided by ISP.

Nov 12, 2008 | ASUS WL-530g Router

1 Answer

Internet connection

Connect a computer to one of the lan ports 1-4.
Connect the adsl modem to "internet" or "wan" port of hub.
Open the hub's configuration page in your browser, usually this is Under Setup->Basic Setup, set the configuration for "Internet Connection Type " to "Automatic Configuration - DHCP". Under Network Setup, enable the hub's internal DHCP server so your lan hosts can get their ip's from the hub. Each local computer should have DHCP enabled. Your adsl modem must support DHCP for this to work, some do not. If it still doesnt work, try setting "PPPoE" instead of DHCP.

May 14, 2008 | Linksys Wireless-G WRT54GL Router

Not finding what you are looking for?
ASUS AAM6010EV Router Logo

Related Topics:

153 people viewed this question

Ask a Question

Usually answered in minutes!

Top ASUS Routers Experts

Christopher Thrash

Level 3 Expert

425 Answers

Martin Murray

Level 3 Expert

1614 Answers

Sudeep Chatterjee
Sudeep Chatterjee

Level 3 Expert

3267 Answers

Are you an ASUS Router Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides