Question about Cameras

1 Answer

When i hit power it does not turn on

Even when the battery is on the canon vm-e2 and i hit the power button it does not work

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 111 Answers

Two possible solutions.

1. Your battery is dead and is not taking a charge. Replace the battery.
2. Blow some compressed air into the battery chamber to be sure there's no debri or dust messing with your connection. Be careful not to blow compressed air on the lens or in the camera body other than the battery compartment area

Posted on Apr 21, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I transfer a video from the canon VM-E2 camcorder on to a VHS tape?


No adapter needed only hook up the a/v out of the VM-E2 to the in of the VHS recorder

Nov 10, 2015 | Canon Video Cameras

1 Answer

Video adaptor giving beep code on post Asus M/B M2NPV-VM 1 long then 2 short beeps also has a usb over current issue at post but has no usb pluged in. please help me decifer this. thanks in advance troy


This is a fix that worked for me, however I cannot tell you why or even feel that I had done anything which would constitue this as a fix. I leave my PC on 24-7 and came in one morning and it was locked up. Couldn't get a video screen, not even reset worked so I threw the power switch on the back of the power supply. Turned the switch back on and pushed the power up button. The MoBo started 1 long and 2 short beeps, repeating. I pushed the reset button and same thing. I again turned the power supply off, then on again and same thing with the beeps. So this time I turned the power supply off then also un-plugged the power cord to the power supply. I left it that way for maybe 10 minutes, while I did a few other things. I plugged the power cord back in, turned the power supply back on and hit the power up button. My PC booted up...no problem. ???

Point is - this issue as reported by others may just be a hardware or bios fluke and needs a power reset or maybe even clearing the bios and restarting. Reseating the memory sticks, use just one memory stick and rotate the memory sticks to sort out the possible bad one and reseating the processor may also help.

Oct 12, 2010 | ASUS M2NPV-VM Motherboard

2 Answers

New battery in my 2+ year old E2.


its a good possibility that you could have received a bad battery or maybe even over charged the device. I would consider returning the battery for another and if problem still exist you should consult Palm about the nature of your problem

Nov 16, 2009 | Palm Tungsten E2 Handheld

1 Answer

Canovision 8 VM-E2


My camcorder went broke for ever......... sorry!

Aug 15, 2009 | Canon Cameras

1 Answer

Power button will not turn pda on or off


hi thanks for using fixya!

Try to remove and install back again the battery. Then try to turn the power on again.

If you need further assistance, let me know.

Apr 22, 2009 | Palm Tungsten E2 Handheld

1 Answer

Tungsten E2 wont power on


Turn it on pressing the reset at the same time or take out battery and unplug/plug the battery. Your battery may have died. If this is helpful, post as such. If it is a fixya, post as such. I had an E2, can tell you alot about it. TY

Jan 23, 2009 | Palm Tungsten E2 Handheld

1 Answer

Palm tungsten e2 will not turn on, replaced batttery,


Plug you E2 into your PC for 8 hours to slow charge. Press reset button on back and later in life your E2 will come on by itself.

Dec 23, 2008 | Palm Tungsten E2 Handheld

1 Answer

Palm will not turn on


have you tried a hard reset?


Todo a hard reset, First press and hold the power button, while holding the power button use the tip of the stylus to gently press and release the reset button. wait for the logo to appear then release the power button.



when you see the message that warns you about erasing all of the info on your hand held press up on the 5way navigator to finish the reset

Dec 21, 2008 | Palm Tungsten E2 Handheld

2 Answers

Won't turn on I press the power button


Press the reset button on the back of the unit with the stylus tip.

Apr 23, 2008 | Palm Tungsten E2 Handheld

1 Answer

Doesn't turn on


Hi Giia: Have you fixed this problem yet? Most likely it is not your fault. There is a very small bug on E2 Palms which causes this to occur. (very rare). Else yes it could be battery problem.

Sep 12, 2007 | Palm Tungsten E2 (Multilingual) Handheld

Not finding what you are looking for?
Cameras Logo

Related Topics:

80 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cameras Experts

kakima

Level 3 Expert

102366 Answers

Steve

Level 3 Expert

3287 Answers

yadayada
yadayada

Level 3 Expert

75117 Answers

Are you a Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...