Question about Flat Panel Televisions
Sir The plasma goes in stand by mode, kindly give me the solution?
SOURCE: philips 42pf9946/12
The plasma display screen is made of a matrix of elements connected to cables along the side and top. On your unit, some of these many, tiny connections are making contact intermittantly thus losing the elements in that area. These contacts are held in place with just pressure and if that is disturbed, you lose that line of elements. Try squeezing the cabinet of the TV on the outside at the top in the area of the loss and see if that makes a difference. May have to go inside and see if the contact assembly is disturbed or warped or something.
Posted on Dec 31, 2007
Hi to all, My 42" Panasonic plasma have the same problem. It turned itself off and now red light flashes 7 times, than after short pause 7 times again. And so on. Any ideas what is wrong??
Posted on Oct 23, 2008
SOURCE: my philips 42 inch plasma
Hi. Try, in back yours tv on left side of the power corde connector have on hole, inside of this hole have one main switch, using one insulated stick and sheck if this switch is off ( may be not ) but try. If you heva esperience take out the back cover and check the fuse on power board. Good lock
Posted on Jan 29, 2009
Tips for a great answer:
Oct 31, 2013 | Hitachi 42HDT50 42 in. HD-Ready Plasma...
Dec 18, 2011 | Pioneer PDP-4270HD 42 in. Plasma...
Sep 02, 2009 | Philips 42PF9631D 42 in. Plasma Television
Feb 27, 2009 | Philips 42PF7320A 42 in. Plasma HDTV
Aug 09, 2008 | Pioneer PureVision PDP-4340HD 43 in....
Mar 08, 2008 | LG 50PX4DR 50 in. Plasma TV
Apr 14, 2007 | Panasonic TH-42PD50U 42 in. Plasma EDTV
304 people viewed this question
Usually answered in minutes!