Question about RCA P52960 52" Rear Projection Television

1 Answer

Hello, my son accidentally broke the plexiglass screen on my rca p52960 tv. was wondering how to take unit apart. any help would be appreciated.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 111 Answers

If your tv still works, then this will be worth it. Turn the set around and remove the screws that hold the particle backing on. From there, drain the high voltage from the flyback. You'll also need to be very careful not to damage the reflective piece inside. This can be removed also, but be very careful. If you loosen the chassis, you should be able to access the front plexiglass panel. If you have any doubts about doing any of this, please consider taking this in to someone who is certified. Remember: working on tv sets can be VERY dangerous. Especially if you don't know how to drain the 2nd anode. HIGH VOLTAGE!!!

Posted on May 24, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Broken front plexiglass rca 52 inch tv


Hello
Contact the nearest authorised service center for RCA at your town.

Mar 06, 2012 | RCA D52W20 52" Rear Projection HDTV-Ready...

1 Answer

Where can i get a plexiglass screen?


I have a P46921 46 in rear projection television. I brought it in and they told me it was the processor board (main control board with programming) that wasn't letting the TV turn on and was quite an expensive repair. I now have the parts back and was wondering if someone could use them. I know that some people were looking for the actual screen found behind the plexiglass or what looks like plexiglass. I have all the parts and was told that it worked beautifully until it decided it wouldn't turn on again. Anyone interested, please drop me an email at jforest7@gmail.com.

Thanks.

Oct 11, 2010 | RCA P46921 46" Rear Projection Television

1 Answer

Broken plexiglass screen


If your TV is anything like mine (which I expect it is, since they’re the same brand), all you have to do is use a T-20 screwdriver bit to remove all the screws from the back of the frame around the plexiglass. Once the screws are out, the frame just pops up and the plexiglass is easily removable.

Mar 20, 2010 | RCA D52W20 52" Rear Projection HDTV-Ready...

2 Answers

My rca p52960 tv will not turn on at all. What can


I would disconect the front control panel you can do it by opening the back of the unit on top of the light box there is a couple plugs just unplug the one going to the front panel then try to turn it on with the remote

Jan 25, 2010 | RCA P52960 52" Rear Projection Television

1 Answer

Could use some help with a "bowed" picture on my RCA P52960


Is the convcergence ( Alignment) also off which gives the TV a 3D look around items on the screen? If so replace the STK730-130 on the convergence power supply

Jun 23, 2009 | RCA P52960 52" Rear Projection Television

1 Answer

Broken protective plexiglass ...


it is not tecomended that you remove this especally around children. i say this but i personally have one like that but i have no children. the other reson is the screens are easy damaged and they are 250 to replace. You can get another front plexi these are known as the supersheild. or if you can find the right size plexi glass it might find another option. It can be watched but like i said it will just lead to more problems without plexi

Nov 02, 2008 | RCA HD52W59 HDTV Projection Television

2 Answers

Problem with RCA P52960


unplug tv from wall then turn back on

Aug 14, 2008 | RCA P52960 52" Rear Projection Television

1 Answer

Rear projection tv broke


try resoldering the vertical output IC. This is a common problem the tubes blank out but sound and on screen displays still work 90% of the time its the solder connections on the vertical IC that causes it.

Mar 24, 2008 | RCA P52960 52" Rear Projection Television

1 Answer

RCA P52960


try a combonation of buttons on front of tv-- hold vol up & chan up fo four seconds?? try menu & vol up for four seconds,etc. Consult o/manual?

Sep 05, 2007 | RCA P52960 52" Rear Projection Television

Not finding what you are looking for?
RCA P52960 52" Rear Projection Television Logo

148 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74383 Answers

matt martin
matt martin

Level 3 Expert

1212 Answers

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

Are you a RCA Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...