Question about Hotpoint 24 in. FDW60 Free-standing Dishwasher

1 Answer

Hotpoint aquarius dishwashers keeps stopping half way through wash flashing between the 40 and 60 temp light. How can I fix this please

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 11 Answers

Control panel is sensitive on this model. Mine did the same and machine would not wash to the programme, stopped half way or would not set at all. Switch off machine and unplug from the mains. Leave for 10 minutes. Plug back in and switch the machine to your required programme. You should find this solves the problem. It worked for me.
Failing that, go to the Hotpoint website, find the customer service number and ask if there is anything else you can do to solve the problem yourself. That is what I did and I followed their advice. It saved me the cost of a service call out and they were very helpful. Good luck

Posted on Jun 12, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi we have a Hotpoint Aquarius FDAL28 dishwasher. Machine turns on, drains and fills but then 3 lights keep flashing and washer stops programme. Any ideas what problem could be?


Depending on which lights are flashing, there is either a problem with the electronic control module, or the pump is stuck or has a motor failure. You can see which by comparing which lights are flashing with the pattern on this page of error codes:

http://www.ukwhitegoods.co.uk/help/fault-codes/dishwasher-fault-codes/3293-hotpoint-fdl-series-dishwasher-fault-codes

Jul 15, 2017 | Hotpoint Washing Machines

2 Answers

Lights flashing


temp solution, switch on and off at wall socket with on/off switch in and out, untill only on/off switch is lit, then use wall switch for power on off. worked for me.

Jul 13, 2010 | Hotpoint Aquarius WF000 Front Load Washer

2 Answers

My hotpoint Aquarius Dishwasher starts up bu only runs a few moments before stopping with 2 lights flashing " wash " " drying "


I had the problem of flashing lights and water did not pump out.Found a piece of bacon in drain pump wedged between impellor and pump body...cleaned it out...problem solved..

Mar 18, 2010 | Hotpoint 24 in. FDW60 Free-standing...

1 Answer

I have a hotpoint aquarius WF250 1500 spin. The


Hi,

I've just had this exact same problem. Can you tell me if you have had any success with fixing it please?

Thanks!

Dan

Sep 17, 2009 | Hotpoint Aquarius WF000 Front Load Washer

1 Answer

Hotpoint Aquarius SDW60 Dishwasher


i have had this dishwasher sdw60 for 18 months and it just keeps beeping, i have cleaned it ,turned it off at the mains it just dont wont to work. please help.

Aug 22, 2009 | Hotpoint 24 in. FDW60 Free-standing...

2 Answers

Hotpoint Aquarius Wf740 F-08 just before rinse and spin.


Hi my Hotpoint WF740 keeps flashin H20. Does anyone know why please?

Jan 15, 2009 | Hotpoint Aquarius WF000 Front Load Washer

2 Answers

Hotpoint aquarius fdw60


My Hotpoint FDW60 dishwasher - I select new programme (normal 55 degree wash) and it defaults to 45 degree wash green light flashing and just making a whirring sound but nothing else happens. I have tried pressing the restart button, holding it in until I get the continuous sound and then restarting the programme but the same thing happens

Sep 17, 2008 | Hotpoint 24 in. FDW60 Free-standing...

1 Answer

Wf540g flashing lights power and half load


I have a hotpoint wf440 with the same fault. An engineer called and said it was a defective computer board. He said it would cost £90 for the part. I found it at http://www.emwelec.co.uk/ for under £50. I have ordered it and will fit when it arrives and let you know!!

Sep 03, 2006 | Hotpoint Aquarius WF000 Front Load Washer

Not finding what you are looking for?
Hotpoint 24 in. FDW60 Free-standing Dishwasher Logo

509 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hotpoint Dishwashers Experts

AcmeUK

Level 1 Expert

25 Answers

yadayada
yadayada

Level 3 Expert

76164 Answers

Brad Brown

Level 3 Expert

15693 Answers

Are you a Hotpoint Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...