Question about NEC Electra Elite 32D-1 Corded Phone
We currently have 6 lines with this phone system; 3 that ring and 3 that do not ring. I want to cancel 1 line that rings and 2 that do not ring. Will the phone system need any programming in order to do this, or will it work as normal if i cancel the phone lines?
The phone system will still work but if you use 9 to dial out, it will still try and grab the lines. You should have them removed from trunk programming in order to do so. ldtsnj,com can help
Posted on Jun 16, 2009
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Feb 19, 2015 | BT Lands Phones
Jun 23, 2011 | NorStar M7310 Corded Phone
The green lights next to the line or pool buttons show the current Line Ringing settings for all
lines or pools assigned to the extension. (If a line or pool is not assigned to a button, the green
light next to that button is off.) The following ringing options can be shown by the green light
next to the line or pool button:
? Immediate Ring - on steady
? Delayed Ring - flashes slowly
? No Ring - flutters quickly
3) Press the line or pool button until the button light shows the correct setting (the setting for the
currently selected line or pool also appears on the display).
4) Continue programming, or exit programming mode.
For incoming calls, the line selection (hunt sequence) is set by the local service provider). For outgoing calls....again....it depends on the system. For the Partner ACS:
1) Press FEAURE 00, SYSTEM PROG, SYSTEM PROG, CENTRAL PROG at extension 10 or 11.
2) Enter the number of the extension to be programmed for Automatic Line Selection.
3) Press **.
4) Press the line, pool, or INTERCOM buttons in the desired order. The valid entries for Automatic
Line Selection depend upon the type of extension:
? Key Extension: Outside system lines, Left Intercom (the factory setting)
? Pooled Extension: Pool 880 button 1, button 2, Left Intercom, Right Intercom (the factory
setting), Pools 881-883, individual lines
For each button pressed, a display similar to the following appears:
Automatic Line Selection
5) To exit Automatic Line Selection, press **.
6) Press CENTRAL PROG and enter a new extension number, or exit programming mode.
Changing line ringing and line selection are tasks that are normally reserved for the Administrator of the telephone system.
Jan 06, 2011 | Lucent 18D Corded Phone
Mar 11, 2010 | NorStar M7310 Corded Phone
Jan 29, 2010 | Nortel Norstar 16-Line PBX Speakerphone
Dec 02, 2009 | Panasonic KX-T7630 Corded Phone
Mar 05, 2009 | Samsung Prostar 816 Phone
Jan 15, 2009 | NorStar M7310 Corded Phone
Dec 08, 2008 | NorStar M7310 Corded Phone
Dec 02, 2008 | NorStar M7310 Corded Phone
Oct 25, 2013 | NEC Electra Elite 32D-1 Corded Phone
91 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: