Question about Samsung TXN2726 27" TV

1 Answer

Samsung TXN2726 TV Does not turn on

I have a samsung TXN2726 TV. It stopped suddenly, when I was watching a movie. That's it.. it does not turn on after that. I tried unplugging the tv for 2 days. It still does not turn on. When I plug it into the power outlet, it gives a ding/tuck sound thats it. Pressing the on/off button on the TV does not do anything. No green light in the front. Also it does not give the customary Sound (little music) it gives when I press the power button to switch on. How can fix this? Any help is greatly appreciated.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert who has answered 1,000 questions.

  • Master
  • 1,139 Answers
Re: Samsung TXN2726 TV Does not turn on

This denotes a power supply problem. The trouble could be in the low voltage or the high voltage supply. You will need a schematic and at least a multimeter to even beging to troubleshoot this problem. If you do not have a background in electronics. I would suggest taking the set to a TV repair shop.

Posted on Sep 22, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Channels for Samsung tv

Reset the set to its factory setting. Unplug it from AC mains and replug it after 10 minutes or so. Make an auto tunte to it.

May 08, 2012 | Samsung TXN2726 27" TV

1 Answer

How do I auto tune my 54cm Samsung Plano TV to receive TV satations? I have misplaced my manual>

You should try going to and look for a tab labeled support or downloads. From there, after answering a couple of questions, you should be able to find the users manual that you can download for free.

Apr 28, 2011 | Samsung TXN2726 27" TV

1 Answer

Universal - remocon settings

I need the code for the Sumsung Universal Remocon for my Samsung TV model TXN2726. It is an older TV 2003 model. It was given to us recently but the remote needs to be programmed and we weren't given the programming code.

Jan 20, 2009 | Samsung TXL2767 27" TV

1 Answer

Poor sound

Well the problem is with the coupling capacitor in speaker circuit. Usually it will be a 220Mfd series in between the Audio IC and speaker

May 11, 2008 | Samsung TXN2726 27" TV

1 Answer

York Coil Problem - TXN2726 27 TV

The part you want is called a "yoke", and not a "York". This is the electromagnetic coil that fits on to the neck of the CRT, and makes the magnetic field from the scan amplfiers to scan the the beam.

I don't know if you realize that when changing the yoke, the purity and convergence alignment will have to be done on the set. This is a job task that requires skill and a lot of practice. Not many service techs are very good at this type of setup. There are specific calibration patterns used for this type of setup. When changing the yoke, it is very common that the ring magnet assembly (convergenc and purity magnets) that is behind the yoke must also be changed. Some yokes come with this assembly together, depending on the model of yoke.

Some manufactures do not sell the yoke separately from the CRT. When the CRT is replaced, it comes with the yoke and magnetic assembly.

An interesting question would be is, how did you determine that the yoke is actualy bad??? It is extremely rare that this type of part fails.

Parts for CRT type sets are getting very scarce. Because the market for spare parts for CRT sets is decreasing very quickly, the clone part manufactures are also not making the generic type dedicated parts.

A way to have parts for your TV set would be to search for a used set that can be used for spare parts. You will have to hope that the same parts you need are also not defective in the used set.

In my opinion, if the yoke is actualy bad, I would be shopping for a new set rather than go through all this trouble. The LCD TV sets are excellent. There is no way that your CRT set will ever be able to perform like the new LCD sets.

Jerry G.

Apr 16, 2008 | Samsung TXN2726 27" TV

1 Answer

Old Samsung portable TV

Obviously the problem is with the SMPS unit, could be a faulty switching transistor.

Oct 11, 2007 | Samsung TXN2726 27" TV

1 Answer

Samsung TXN2726 Televison Remote

hiya sounds like the remote has de-registerd it self with the telly. all you need to do is find out the infered codes for that telly and do the [set] - [TV]combo with the numbers after.

Oct 02, 2007 | RCA 36V550T 36" TV

1 Answer


If you can get into the menu, and know the proper password, then you can change the parental control setting. If not then the memory chip may have to be replaced. Stargazer

Aug 05, 2007 | Samsung TXN2726 27" TV

Not finding what you are looking for?
Samsung TXN2726 27" TV Logo

Related Topics:

1,356 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Standard (CRT) Televisions Experts

The Knight
The Knight

Level 3 Expert

66456 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

Are you a Samsung Standard (CRT) Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides