Question about Toshiba E-Studio 161 Copier

1 Answer

Konica 3135 error code f 43 ( exposure lamp)

Copier display reads call the service co. Error code F 43. did some research - says it is an exposure lamp. Any way to by pass this and get machine to work. I am going to sell it but need it to work before I do. If it is, how do you change the lamp?

If anyone can help me - thank you. Put Konica problem in the subject line when responding.
Thanks

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 40 Answers

The exposure lamp is located in the scanning area beneath the glass. If you choose to do it yourself you can purchase a lamp here
https://www.interlight.biz/light-bulb/252254045&ID=FROOGLE-US
You can get the manual here
http://www.service-manual.net
Be sure to follow the steps closely it is easy to do more damage than good in that area if you try to wing it. Good Luck

Posted on Apr 20, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I fix error code p51 on Konica 3135 copier


P51 means "key switch OPEN", look to the right side check the continuity of the Sw.

Dec 04, 2014 | Konica Minolta Konica 2125 3135 4145...

1 Answer

Whats the problem if code C04 come from Minolta EP1083


The error code is displayed in 2 section on the display on the zoom dosplay and the number display.
C0400 Exposure lamp malfunction.
C0410 Exposure lamp thermistor malfunction.
Verify the exposure lamp continuity and the thermistor continuity.To reset error code open the copier and press the reset microswitch located on the rear PWB panel ,close the machine front door.

Jun 02, 2013 | Office Equipment & Supplies

1 Answer

Mu minolta is displaying c40 error


C40XX refer the exposure lamp,exposure lamp thermistor or thermofuse.Please read the correct error code:400,410,420.

Mar 13, 2011 | Minolta EP1030/1030F CS/PRO Copier

1 Answer

Konica 3135 autofeeder F60 error


this error code means the interlock switch ms301 has failed or it could be the radf control board or the harness for ms301 it is almost impossible to find parts for these machines now. they are on the konica obsolete list sorry and good luck

Dec 03, 2009 | Office Equipment & Supplies

1 Answer

Ricoh copier 3813 - error e


E codes are displayed in the copy counter.To display both digits of the E code press the enter key.
E11 exposure lamp error.Possible causes exposure lamp open thermofuse open.
E12 exposure lamp error Ac drive board defective or main board defective.

Oct 26, 2009 | Ricoh Aficio 450 Copier

1 Answer

Error mesege Showing E1


The E codes E1-E7 are displayed in the copy counter.To display both digits of the E code press the ENTER key.When the machine detect E13 condition E1 is displayed in the copy counter.Hold down the enter key and 13 is displayed.
E 11 - Exposure lamp error.In this case check the exposure lamp continuity,the thermofuse is open or power suplly board defective.
E 12 -Exposure lamp error .AC drive defective,main board defective
E 13 - Zero cross signal error.Main control or DC power board defective.
To clear the service code turn OFF/ON the machine.

Sep 09, 2009 | Ricoh Office Equipment & Supplies

2 Answers

Konica bizhub C351 with a C9401 error code


The output from the CCD Sensor is a predetermined
value or less during CCD Sensor gain
adjustment.

1
Check the flat cable for proper connection and
correct or change as necessary.

2
Change PWB-C.

Aug 03, 2009 | Konica Minolta bizhub C351 All-In-One...

1 Answer

Konica 3135 Copier Code F 36


Well, I'm sorry to say that you're going to need a tech for this problem. You have a fuser problem...either a blown fuse, heater lamp, thermistor, or something...whatever the cause, the fuser is not heating up. And the code can only be reset within service mode, once the problem is repaired.

Feb 25, 2009 | Konica Minolta Office Equipment & Supplies

1 Answer

Code error 06-43 et 06-40 copieur xerox 5837


Dear sir; Thank you to bring out the question to refresh my memory, I hope is correct! the error code 06-43 or 40 that all belong to optical problem, my suggestion ;
1, remove the glass plateform
2, check the exposure lamp continuaty, if nocontinuaty replace it.
3, check the exposure thermos fuse continuaty,if no continuaty replace it.
GOOD LUCK, if you need more help let me know
HAVE A HAPPY HOLIDAY !!!

Dec 17, 2008 | Xerox 5830 Copier

Not finding what you are looking for?
Toshiba E-Studio 161 Copier Logo

Related Topics:

302 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toshiba Office Equipment & Supplies Experts

Branko Djurdjevic
Branko Djurdjevic

Level 2 Expert

102 Answers

CheckitRight
CheckitRight

Level 3 Expert

1362 Answers

pkwc

Level 2 Expert

254 Answers

Are you a Toshiba Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...