At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Re: How to remove washer jets from mitsubishi 380 VRX...
Squeeze the front and back sides of the jets together and push up from underneath hood you may have to remove the hood insolation to be able to get to them.Cheers-Denny
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Question edited for clarity, add maker, add CAPS, remove text speak.
Question moved to Mitsubishi category.
This is not a model we know in North America. You need an auto electrician to connect a pro grade scan tool computer to read the historical code data as to why the Check Engine Light came on. It will also tell which sensor is causing the TCL Light to be stuck on Off.
Be carefull remove the w washer hose on nozzle they break easy try heating that little hose a bit its easyer to remove after you did remove spray air from the outside on the nozzle on the hood or bonnet for u debrie will come out make sure its clean reinstall
And try it
The Aussie-built Mitsubishi 380 sedan rear light assemblies are removed as follows:
Remove inside boot (trunk) lining behind the light assembly to expose two 10mm nuts with captive washers and (deeper towards the outside of the vehicleA) two plastic lugs.
Unscrew the two 10mm nuts. Gently prise the light assembly straight back from the rear of the car. This requires some effort. The plastic lugs remain embedded in the sheet metal while notched mating two steel pins remain attached to the light assembly.
The bulb holders are removed by a partial turn anticlockwise (looking at the holder from the top).
Neither of the answers are actually correct.
Yes you need to press the button PLUS use a number drill or similar in the little hole on the opposite headrest leg @ the same time. The headrest will come out very easily when you do bothe these things @ the same time.
The washer pipe comming from the tank to the jets is probably folding over of touching something between the bonnet and the check the pipe is in place where it folds with the going up and down
×