Question about Mitsubishi WS-55807 TV

1 Answer

TV covergence issue maybe

Hi I have a problem, I want to get a price quote. I am very sure I need convergence piece for my tv. The problem is that my telvision can't converge. I go to menu and nothing and press button then nothings happen. Then after awhile of being in the menu the tv freezes. I don't have the original remote but I have a remote that has all the keys. I also want to know how adjust the convergence at the bottom of the tv as well Oh yes and one more thing I was reading online about how to make 100 inch tv out of a smaller tv. I was wondering if could use my rear projection parts to do this.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert who has answered 1,000 questions.

  • Master
  • 1,153 Answers
Re: TV covergence issue maybe

All but one answer is here on the threads, read solutions for your set. the 100in tv you will have to call MCM at 1-800-543-4330 ask about the Sima 60-110" projection screens.

Posted on Oct 01, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Hi there, my tv will not allow me to converge the picture. ill push auto converge and it stops and reads "auto converge cannot be completed because a senor was unresponsive. its gotten really bad and...

The convergence chip is already faulty try to replace it. Remove the back cover of your tv but be sure to unplug it before opening it, you will see the convergence chip attached to a large aluminum plate this plate is the heat sink be careful when replacing the convergence chip because you may accidentally damage the pcb and cause much serious damage to the tv. Or try to contact a technician to do it for you and save you from stress good day and best regards.

Aug 11, 2011 | RCA P61310 TV

1 Answer

I changed my two IC chips and three resistances on my Hitachi TV to fix color alignments. Now the problems is that yellow and blue double image are seen at the bottom of my screen with no much effect on...

Ur tv still have dead resistors parts,test all 12 resistors parts around the 2 STK convergence ICS and changes some more dead resistors parts or changes all 12 resistors parts for sure.If tv still have the same problems after tested and replaces more resistors parts or all 12 resistors parts.Than some how when u handling and replacing the 2 STK convergence ICS and resoldering the 2 STK covergence ICS u short it out the 2 STK convergence ICS by resoldering without proper grounding ur self not to allow for static electricity to kill the 2 STK convergence ICS or u using a soldering iron to high of a wattage for doing soldering ICS work.

Apr 23, 2011 | Hitachi 43FDX01B TV

1 Answer

Sony kp51ws510 convergence problem

dry a degausing coil.. maybe try the yoke deflection .. its nasty i know.. but if it dosent work.. maybe u need a new tube.. not worth it in my opinion.. price of a new tv.

Dec 16, 2009 | RCA F35317 35" TV

1 Answer

I have a 52inch rca projectin tv model hd52w59 i

Ur convergence it dead,U know how to solder?Buy a covergence kit,replace what in that kit.Tries these Websites,Tv Repair,

Sep 30, 2009 | RCA Standard (CRT) Televisions

1 Answer

Hitachi convergence issues


This is a convergence issue

Try to visit this site


Jul 08, 2009 | Hitachi 60EX38B TV

1 Answer

Colors out of porportion, maybe a bulb went out

When you have a 3-d effect. this is called convergence. Is the picture disorted or bowed in. if the picture is bowed in then this is an indicaTION of complete loss of power to covergence curcit. I always check to see if you have the convergence option in the setup menu if you do not then i suggest reading the fl231 problem in the tips and tricks sectionl

Mar 15, 2009 | RCA HD52W58 52" TV

1 Answer

Seeing multiple images

Found this on a search:

It is fairly involved so make sandwiches instead of cooking ;-)

May 30, 2008 | Hitachi 43FDX01B TV

1 Answer

43FDX01B convergence

Maybe you don't require a new one; take a look at this procedure:

It's worth shot at that price-

May 26, 2008 | Hitachi 43FDX01B TV

1 Answer

Auto Converge

If the message "sensor is unresponsive" crops up then the problem is definitely electronic and lies somewhere in a loop that starts near the tube base, goes to the main board and back to the tube base. However, you can try to do a manual converge by adjusting the ring permanent magnets on the neck of the tube (right behind the scanning coils) while something is being displayed. Normally these magnets are secured with a clear glue to minimize drift. Use a heat gun to soften the glue and then turn the ring magnets around until you are happy with the picture. As you know, this part of the TV has some pretty dangerous high voltages so try to keep your left hand in your back pocket while doing these adjustments with your right. Good luck.

Jan 18, 2008 | RCA HD56W58 56" TV

1 Answer

Bending Picture

Convergence issues can be one or more of three different this case i would think it might be what is known as covergence power board.+ convergence amp board. both items very fixable and easy to replace. It would be difficult to determine however because if its the ssb board... then much more difficult to replace.

Sep 08, 2007 | RCA HD52W58 52" TV

Not finding what you are looking for?
Mitsubishi WS-55807 TV Logo

Related Topics:

65 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Standard (CRT) Televisions Experts

The Knight
The Knight

Level 3 Expert

66413 Answers

matt martin
matt martin

Level 3 Expert

1187 Answers


Level 3 Expert

6993 Answers

Are you a Mitsubishi Standard (CRT) Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides