Question about Car Audio & Video

1 Answer

Car stereo I have a Ford Mondeo (2005) Ghia X with a sony 6 cd autochanger system, the problem is that i cant eject any of the cd's, when i press the load button the readout says 'all cds full' but when i press eject button it says 'no cd' Any help would be welcome as i'm getting a bit fed up with listening to the same 6 cd's for the last 4 mths

Posted by on

  • 1 more comment 
  • kjdq67 Sep 26, 2007

    Thank you but there is no magazine, all 6 discs go into only 1 slot, i can't disconnect it either as i don't have the stereo code

  • Anonymous Mar 09, 2009

    I have the same problem...when I first bought the car (it was 18 months old) just slipped out the cd player...disconnected the power...reconnected it...then it worked. Trouble has happened again and I don't have the tools for removing the cd player...I wonder if there is a fuse I can remove. If not I will have to disconnect the battery. If you do this then you must have the code for the radio. I hope this helps

  • fredrikk_hof
    fredrikk_hof Feb 19, 2013

    It is not sufficiant to remove a fuse. -the radio has a permanent power on anoter circuit. Simplest way is to disconnect the negative from the battery and wait 30 seconds. It workwd well for me .



1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert who has answered 20 questions.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 65 Answers

If you have good skill,open it and move the gears with your fingers until the magazine do some movement,maybe it's not force anything,look for any disc inserted in play position,that's why the magazine don't come out.

Posted on Sep 24, 2007


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I have a Ford Mondeo 2.0 TDCI GHIA with a SONY 6 CD + Radio, I have had a new alternator fitted today, so now it is asking for code, I have put the code in that is in the Audio Guide and still nothing....


When you enter the code on a Ford radio you need to press button number 5 to get the radio to save the code.

If this does not resolve the issue get back to me with some more detail and I will be glad to advise.

Thanks for using FixYa.

Aug 12, 2011 | Car Audio & Video

1 Answer

!) Autochanger plays all CD's but will not eject

They still make blaupunkt car dude its old... I bet the eject springs finely broke. The best way to get your cos back is to take the thing apart.

Aug 11, 2011 | Blaupunkt Car Audio & Video

1 Answer

Unable to play and eject and cd's from sony 6cd in my ford mondeo Mar 2007 model

some mechanical problem inside your stereo cd unit that maybe broken parts, circuits, jam or foreign object

Feb 02, 2011 | Sony Car Audio & Video

1 Answer

Hi, I've just aquired an '09 Ford Mondeo 6000CD RDS EON radio/cd on ebay. Can it be fitted to a Mondeo Ghia on a '52 plate?

It would have been better to find this out first before you bought this unit, but yes it should fit as long as your vehicle has a double din facia fitted, if not you can change the dash

Feb 07, 2010 | Car Audio & Video

2 Answers

Ford mondeo TCDI ghia x but no Sony audio car manual

Try here

Oct 23, 2009 | Car Audio & Video

2 Answers

Ford Mondeo rear brake pads replacement

I have ford mondeo ghia 2002.
when i press the button on the remote-key, I can lock and unlock the powerlock (in the door).
When I press the button un the door, not all doors are locked.

What's the reason?

Sep 17, 2009 | Cars & Trucks

1 Answer

Can't eject cd magazine - E-99 error message

I put a small pin in the reset button a few times and that then got the catridge to eject.

Apr 14, 2009 | Car Audio & Video

2 Answers

Can't eject cd magazine - E-99 error message

I had the same problem. I opened up the unit and found out that there is a plastic gear that moves the loader. When worn the loader can not load tha magazines nor change cd's. I replaced the gear and the cd autochanger worked fine.



Dec 01, 2008 | Kenwood KDC-C717 10-Disc CD Changer

2 Answers

Sony CDX-646 Autochanger: Magazine removal

go to the control socket on the sicd and put 9-12 volts straight in to the two center holes. can't remember which way round but it only works one way and what ever you do it's not gonna blow it up

Feb 04, 2008 | Sony CDX-646 10-Disc CD Changer

Not finding what you are looking for?
Car Audio & Video Logo

Related Topics:

681 people viewed this question

Ask a Question

Usually answered in minutes!

Top Car Audio & Video Experts

xxxxxx xxx

Level 3 Expert

4905 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers


Level 3 Expert

77932 Answers

Are you a Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides