Question about Epson Stylus Multifunction Inkjet Printer/ Copier/ Scanner

2 Answers

HOW TO LOAD PAPER INTO EPSON SX 100

INSTRUCTIONS SUPPLIED TOO VAGUE TO BE OF ANY USE.

CANNOT SEE ANY TYPE OF PAPER SLIDE OR CHUTE

CAN ANYONE TELL ME HOW TO LOAD THE PAPER?

Posted by on

  • Anonymous Apr 29, 2009

    I can not work out how to load paper. I'M I REALLY THAT STUPID???

  • Anonymous May 10, 2009

    paper won't feed, paper not loaded correctly keeps coming up. I've tried always.

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Vice President:

    An expert whose answer got voted for 100 times.

    Governor:

    An expert whose answer got voted for 20 times.

    Corporal:

    An expert that has over 10 points.

  • Expert
  • 1 Answer

Hey!! I just had the same problem, was feeling pretty stupid! You've prob already figured it out but just incase any one else is looking for an answer...

When you look into where you're supposed to load the paper there is a grey thing about halfway over. This is the guide. It doesnt tell you properly in the instructions you need to move it but you do. It doesnt slide very easily.. thats why I thought it was just a part of the printer. But if you push it back it'll slide easier. Anyways move this all the way to the left, load your paper then bring it back to the right as close to the paper as you can

Posted on Jul 03, 2009

  • 1 more comment 
  • vbranton
    vbranton Jan 15, 2012

    Really appreciate you taking the time, very helpful. :)

  • Anne Nov 03, 2012

    Thank you! you save my life

  • iloveboys
    iloveboys Feb 10, 2014

    This is still relevant. we spent hours. thanks. google. much. thanks

×

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 29 Answers

Fiend your solution direct from EPSON. Here is your solution...
HOW TO LOAD PAPER INTO EPSON SX 100 - 79d0c86.jpg
http://www.epson.com/printer/prob676ijt65/solution

tiuy9

Posted on Sep 04, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Paper not feeding for epson nx400


Check the following:


  • If paper doesn't feed, remove it from the sheet feeder. Reload it against the right side, behind the tab, then press in the tab on the edge guide and slide it against the paper. Make sure the paper is not above the arrow mark inside the edge guide.

  • If multiple pages feed at once, remove the paper from the sheet feeder, fan the edges to separate the sheets, then reload it.

  • If the paper doesn't eject fully, you may have set the wrong paper size. Press the c:\users\home\appdata\local\temp\msohtmlclip1\01\clip_image001.gif Stop button, then open the scanner and remove the paper. Select the correct paper size when you reprint.

  • If it's wrinkled when it ejects, the paper may be damp or too thin. Load new paper.

  • Make sure you use new, smooth, high-quality paper, that is not curled, creased, old, or too thin. Make sure to load it printable side up.

  • Do not load paper with holes punched in it for insertion in a binder.

  • Make sure you load only up to the recommended number of sheets. If you're printing on both sides of the paper, try loading fewer sheets.


Paper type

Load up to
this many sheets

Plain paper

Approximately 120

Epson Bright White Paper
Epson Presentation Paper Matte

80

Epson Photo Paper Glossy
Epson Premium Photo Paper Glossy
Epson Ultra Premium Photo Paper Glossy
Epson Premium Photo Paper Semi-gloss

20

Epson Premium Presentation Paper Matte
Epson Premium Presentation Paper Matte Double-Sided
Epson Photo Quality Self-Adhesive Sheets
Epson Iron-On Cool Peel Transfer Paper

1


If the paper jams, do the following:

1. Gently pull any jammed paper out from the output tray or sheet feeder.

2. To eject the jammed paper, try turning the Epson Stylus NX400 off and then back on.

If that doesn't work and paper is stuck inside, turn off the Epson Stylus NX400. Open the scanner, remove the jammed paper and torn pieces, close the scanner, and turn the Epson Stylus NX400 back on.

Aug 17, 2012 | Epson Stylus NX400 InkJet Printer

1 Answer

EPSON PX660 Display load paper but when i load paper the feeder does not roll/pick up paper the paper


Make sure it's not jammed with paper then follow these instructions for loading paper.Power unit offOpen the paper support, then slide out the extension.
Open the front cover. Next, slide out the front tray extension.Make sure that the tray lever is in up position.Slide the edge guide to the left.Fan a stack of paper, then tap it on a flat surface to even the edges.Load the paper with the printable side up, against the right side of the sheet feeder and place it behind the tabs. The printable side is often white and brighter then the other side... if using non-standard A4.Slide the edge guid against the left edge of the paper, but not too tightly.Power unit back on.

Nov 17, 2011 | Office Equipment & Supplies

1 Answer

Hello can you assist I can not figure out why the CX8310 Epson printer won't allow me to feed paper into it.


  • If paper doesn't feed, remove it from the sheet feeder. Reload it against the right edge, behind the tabs, then slide the left edge guide against the paper. Make sure the paper is not in front of the feeder guard.
  • If multiple pages feed at once, remove the paper from the sheet feeder, fan the edges to separate the sheets, then reload it.
  • Don't load too many sheets at once (up to 20 sheets of photo paper, 80 sheets of Premium Bright White paper, or 100 sheets of plain paper).

    Sep 11, 2010 | Epson Stylus CX3810 All-In-One InkJet...

    1 Answer

    Paper not feeding properly


    Follow these steps to reload paper:

    1. Remove the paper and make sure it's not curled or wrinkled.

    2. Fan the stack to make sure the sheets are separated.

    3. Open the paper support and pull up the extension.

    4. Extend the output tray.

      pm_paperload_217_er.gif

    5. Flip the feeder guard forward. Squeeze the edge guide and slide it left.

      pm_paperload_218_er.gif

    6. Insert paper, printable side up and short edge first, against the right side and beneath the tab.

      pm_paperload_219_er.gif

      You can load up to 100 sheets of 20 lb plain paper or up to 20 sheets of photo paper.

    7. Slide the edge guide to the edge of the paper, but not too tightly.

      pm_paperload_220_er.gif

      Follow these guidelines when loading paper:

      • Do not load paper above the arrow on the edge guide.

      • If multiple pages feed at once, remove the paper from the sheet feeder, fan the edges to separate the sheets, then reload it.

      • If you're printing on both sides of the paper, try loading fewer sheets.

      • If it's wrinkled when it ejects, the paper may be damp or too thin.

      • Do not load paper with holes punched in it for insertion in a binder.

      • Load the printable side face-up. It's often brighter or whiter than the other side.

      • Load letterhead or preprinted paper top edge first.

      • If you experience paper feeding problems, try loading fewer sheets.

      • If you're using special paper, check the package for special loading instructions.
    Follow these steps to reload paper in the Automatic Document Feeder:

    1. Remove the paper and make sure it's not curled or wrinkled.

    2. Tap the originals on a flat surface to even the edges.

    3. Move the edge guides outward.

      pm_paperload_223_er.gif

    4. Insert the originals face-up. You can load up to 30 letter-size sheets at a time. If you load legal-size sheets, insert only 10 sheets at a time. Make sure the originals are not creased or folded and do not have tape, staples, or other materials that could obstruct the feeder.

      pm_paperload_224_er.gif

    5. Slide the edge guides against the originals.

      pm_paperload_214_er.gif

    Feb 27, 2010 | Epson Stylus CX9400 Photo Printer

    1 Answer

    Epson stylus sx515w paper will not feed properly


    pls make sure that you loaded the paper correctly.
    Open the paper support and pull up the extensions. Open the output tray and pull out the extensions. Then flip up the paper stopper on the last extension, unless you’re printing on legal-size paper. . Flip the feeder guard up, out of the way, then squeeze the edge guide and slide it left. Insert paper, printable side up, against the right side and beneath the tab. Load paper short edge first, no matter which way your document faces.
    Load letterhead or pre-printed paper top edge first.
    Do not load paper with holes punched in it.
    Do not load transparencies.
    Do not load paper above the paper.4.3.4.jpg arrow on the edge guide.
    Check the paper package for any additional loading instructions. 5. Slide the edge guide to the edge of the paper, but not too tightly. if you put the paper correctly and still not feeding the paper correctly, that means the rollers of the printer is broken

    Feb 12, 2010 | Epson Office Equipment & Supplies

    1 Answer

    Epson R1800 message needs servicing


    Go to computer tool stores, and search the tool that have the name " Auto Reset chip" or "cartridge chip" or "resseter chip" for your epson type , example : "resseter chip for epson t10" . this tool is a lot of selling at any computer stores in the world . In my city (Jakarta - Indonesia) in the selling price just -/+ $. 5 , this tool easy to use and will be described by seller.

    The tool like this I have long used since 2002 for epson printer c41 sx and c43 sx....

    Many ways to overcome the problems, but it's the most practical ways " to Reset Waste Ink Pad Counter of Everything Epson Type"
    rsseter-2.jpg

    Aug 14, 2009 | Epson Office Equipment & Supplies

    1 Answer

    How to copy with Epson SX 100 pleaae?


    first of all on the printer.then place the document to be copied (the orignal)on the scanner glass.then press the option button copy on the printer.then press in which mode you want.if you want the document to be copied in colour press the colour button on the printer.if you want the document to be copied in black press the black button on the printer.and place the blank paper in the paper tray ,thats all.

    Feb 25, 2009 | Epson Stylus Multifunction Inkjet Printer/...

    Not finding what you are looking for?
    Epson Stylus Multifunction Inkjet Printer/ Copier/ Scanner Logo

    Related Topics:

    7,656 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Epson Office Equipment & Supplies Experts

    Les Dickinson
    Les Dickinson

    Level 3 Expert

    18391 Answers

    Doctor PC
    Doctor PC

    Level 3 Expert

    7733 Answers

    mukhtar21 shaikh
    mukhtar21 shaikh

    Level 3 Expert

    2017 Answers

    Are you an Epson Office Equipment and Supply Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...