Question about Samsung 50" Slim-Depth DLP HDTV

2 Answers

On and off chaos

My tv turns on, stays on for a few seconds then turns black and finally powers off..the three lights that are next to the tvs buttons keep flickering...wtf do i do

Posted by on

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    New Friend:

    An expert that has 1 follower.

  • Expert
  • 58 Answers

Replace the lamp

Posted on Apr 23, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 2 Answers

I had the same problem and ended up replacing the main board. It was an easy fix and took about 10 minutes. The part number I purchased was BP44-01001A. I researched this problem for a few weeks and never saw a solution. I first purchased the sub board without success. My second purchase was the part number listed above and it worked. Since the television is a few years old, it's hard to find that part. You'll need to just check with the different places on the web that offer and hope they have it in stock.
By the way...the part ended up costing $116 with shipping. Hope this helps.

Posted on Mar 08, 2013

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need remote code for Vizio D32h-CO. No remote for TV. Have Dish remote


For my universal remote control's manual, all of the VIZIO codes are:

11758
13758
12757

Also, remember that you can have the remote scan for codes on its own. On the remote just hold the "TV" control button (should be at the top near the power button) and the power button turns on. Then hold the power button too, and it shuts back off; keep holding until it turns back on and then it will stay on. Then, point the remote at the TV (it should be on) and press the power button every three seconds. It will test a code every two or three seconds. When your TV finally shuts itself off in response, you've got the right code and the remote should work.

Jan 18, 2018 | Vizio Televison & Video

1 Answer

Need to program samsung tv universal remote. How do I do it?


For my universal remote control's manual, all of the Samsung codes are:

12051
10178

Also, remember that you can have the remote scan for codes on its own. On the remote just hold the "TV" control button (should be at the top near the power button) and the power button turns on. Then hold the power button too, and it shuts back off; keep holding until it turns back on and then it will stay on. Then, point the remote at the TV (it should be on) and press the power button every three seconds. It will test a code every two or three seconds. When your TV finally shuts itself off in response, you've got the right code and the remote should work.

Jan 18, 2018 | Samsung Televison & Video

1 Answer

Printer does not print


Instructions
    • 1 Switch the Canon MX310 off using the "Power" button, then push the "Stop/Reset" button on the control panel. Hold the button down for about five seconds.
    • 2 Push the "Power" button while holding "Stop/Reset." Hold down both buttons for five seconds.
    • 3 Release "Stop/Reset" while holding down the "Power" button.
    • 4 Push "Stop/Reset" twice while continuing to hold the "Power" button. Release the "Power" button. The power light will turn green.
    • 5 Once the light is steady green, push "Stop/Reset." Wait about three seconds and push it again. Wait three more seconds and push it one final time, for a total of three times. The power light will turn orange.
    • 6 Push the "Power" button, then lift the MX310 cover open.
    • 7 Remove both ink cartridges and wait 10 seconds. Replace the cartridges and close the MX310 cover. Wait 30 seconds.
    • 8 Push the "Power" button. Wait a few seconds to allow the printer to fully power down, then switch the Canon MX310 back on using the "Power" button.

Jul 23, 2014 | Canon PIXMA MX310 All-In-One Printer

1 Answer

Programming the remote to my tv do not no the tv code


The code can either be automatically found or you can look it up online. To automatically program it follow these steps:

Turn on the TV, and then point the remote control toward the TV. Then press and hold the TV button and the OK button at the same time for two seconds. Then all of the buttons will light up for two seconds, then only numbers 1-12 will stay lit.
Then press the CH+ button to send a series of off commands to your TV. Continue pressing until your TV turns off.

Note
Give enough time for the TV to respond to the off command after you press each button. Some TVs take more time to react to off commands than other TVs.

Press the TV button to save the code and to exit. All the buttons on the remote control will blink three times to confirm the code.


If this does not work then repeat the steps up to the point where the 1-12 buttons light up. Then go to this site and find your TVs code, there will most likely be a few codes for your TV, try each one until one works:

http://www.maxconsole.net/forums/archive/index.php/t-13852.html

After you enter the code, press CH+ again until your TV turns off.

That's it, you shouldn't have a problem anymore. Good luck.

Feb 13, 2010 | Microsoft Xbox 360 Universal Media Remote

1 Answer

Picture does not stay on when set is turned on


its a switch fault, you need to get a tecnition but cheaper buying a new tv,hope this help

Jan 24, 2010 | Philips Magnavox 27MT5405 TV

2 Answers

Won't come on


hy i got a toshiba 42" LCD tv ,when i press the power boton
iget the red light,& it stay that way ontil i pressthe power back off
thanks for any help

Jun 26, 2008 | Toshiba 62HM95 62" HDTV

3 Answers

TV turns on then off no picture


I was watching my tv and it just automatically turn off, everytime since then i turn it on it goes off in seconds without picture or sound comes.

Mar 20, 2006 | RCA D52W19 52" Rear Projection Television

Not finding what you are looking for?
Samsung 50" Slim-Depth DLP HDTV Logo

350 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Televison & Video Experts

The Knight
The Knight

Level 3 Expert

75169 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1689 Answers

Are you a Samsung Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...