Question about Washing Machines

1 Answer

Cloth too wet when washing cycle complete

I have a 2 1/2 year old HE4t Kenmore Elite Front Loader. The washer does not seem to be spinning out the load (i.e. cloth are still very damp) liek it use to. The washer is not over loaded.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 423 Answers

When a front load washer is not spinning properly (it is very, very hard to overload a properly operating front load washing machine) you have a problem that can not be solved easily. Besides making sure the washer is level and stable (no rocking on its feet), changing the controls on the front or making other adjustments will not fix it.

It will require a service technician to take a close look at it, open up the washer and possibly even listening to the machine as it washes, drains and (attempts to) spin.

I hope this information is helpful. I wish I had better news or more guidance.

Posted on Apr 20, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Stop frequently on spin and rinse cycle F6 code


I have a Kenmore Elite he4t front load washer that was working fine and then we moved and now it stops washing midstream and flashes an F and a H. I have to pause and restart then it will stop washing again after a few minutes and flash the same codes again. I reset again and then it stops with 1 minute left and will not drain.

Apr 06, 2010 | Kenmore Elite 45986 Front Load Washer

1 Answer

F 02 reading on front loader washer.


I found several helpful sites from owners who had the same problem and they got the issues resolved, will try what they advised and if that don’t work I’ll call a service technician.

Oct 01, 2009 | Kenmore Elite 45986 Front Load Washer

1 Answer

Kenmore HE4T won't stop on the Spin Cycle. Stays


Replaced the relays with the 16Amp rated ones from Digitel.

Aug 15, 2009 | Kenmore Elite 45986 Front Load Washer

1 Answer

Kenmore Elite Washer 110.24992300 spin problems


The pressure switch is mis-reporting the water level to the ECU.

Test/replace the pressure switch.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.

May 29, 2009 | Kenmore 24032\24036 Top Load Washer

3 Answers

Kenmore Elite HE4t washer won't spin


The motor controller board is likely bad.


Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.

Jan 06, 2009 | Kenmore Elite 45986 Front Load Washer

1 Answer

F Code for the Kenmore Elite he4t Front Load Washer (3 years old)


Hi! ricksmith
What is the first three digits of the model number.
The he4t I have reference to does not have a "F" code error. Most of the codes are two digit, PF, F1 to F9 etc.
You could try: Pressing Pause/Cancel two times to clear code. As well as unplug for 20 seconds. Do you have power fluctuations in your area.
InMrFixIt

Aug 27, 2008 | Kenmore Elite HE4 Electric Dryer

2 Answers

Kenmore front loader washer model 11042822201 won't drain and spin


As I have not received a response, I'm assuming these hints have taken care of your problem. If you have any more troubles, feel free to drop me a note back.

Jun 30, 2008 | Kenmore Elite 45986 Front Load Washer

1 Answer

Clanking noise during spin cycle


I was told by 3 technicians that my washer had shot bearings and this is a common problem for the Kenmore Elite Front loader.

Sears knows it and will not do anything about it except try to sell you a new washer since it costs $800 to replace the unit with the bearings.

Jan 02, 2008 | Kenmore Elite 45986 Front Load Washer

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

167 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

yadayada
yadayada

Level 3 Expert

80608 Answers

Brad Brown

Level 3 Expert

17328 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...