Question about Samsung HLP4663W 46" Rear Projection HDTV

1 Answer

Color wheel blue people after replacing.Reset factory setiings.Still blue

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 51 Answers

Wrong color wheel..there are 2 colorwheels.you will need to remove a jumper wire...jumper is inside an opening abut 3/4 inch under label.

Posted on May 06, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Geek Squad broke my Television


Try these settings:

Picture Mode: Movie
Contrast: 100
Brightness: 44
Sharpness: 20
Color: 50
Tint: 50
Backlight: 7
Color Tone Warm1
Digital NR Auto

Detailed Settings
Black Adjust Low
Dynamic Contrast Low
Gamma -1
Color Space Auto
Edge Enhancement On
xvYCC Off

White Balance
R-Offset 21
G-Offset 20
B-Offset 21
R-Gain 0
G-Gain 21
B-Gain 26

My Color Control
Pink 20
Green 15
Blue 15
White 15
Auto Motion Plus 120hz: Low

Feb 28, 2014 | Samsung UN55C6500VFXZA 55in Led Hdtv 1080p...

1 Answer

Touch screen not working, wifi isn't either and the flah isfor the camera is not working


reset it to factory setiing
but before going for so
backup your data with google/external memory card

Feb 01, 2014 | LG P925

1 Answer

I have replaced a color wheel for a DLP Samsung TV but some colors does not appear making every face turned blue with less definition


Hello luis_crocchi,

Welcome, and thank you for using FixYa!

To answer your question: You have replaced the color wheel, but the light engine (jet) will probably need to be replaced also.
You will also have to have the color wheel and jet tuned (timed) back to factory specs by a TV Repairman as well. If timing and lighting are out of sync, the picture will be also.

Have a great day!

Sep 12, 2011 | Televison & Video

1 Answer

Just replaced color wheel for samsung hlp 5063W and my on screen color is wrong. how do I reset on screen colors to original factory settings?


You may have to do a reset in service mode....sorry - don't have the guide but it should be in the usermanual for this model.

Aug 27, 2011 | Samsung HL-P5063W 50" Rear Projection HDTV

1 Answer

How do i fix the color on my tv?? Very blue


Reset it to factory colors setting,turn colors down to -5 or 40 percent should be normal,still very blue than ur video backlight board is dying must replaced.

Dec 15, 2009 | Panasonic TC-32LX85 LCD TV

1 Answer

Akai LCT2701TD Color problem


Fault at its main digital board. Short circuited component/s at it. Contact any service technician; or the authorized service center. If you wish to get some details; check the site linked here. Pull up older posts.
http://electronicshelponline.blogspot.com/
In most cases, the main board might have to be replaced. If so, a software [firmware] update too might be necessary.
Before going further; try a hard reset first. If it does not help you, replace the main digital board. There are two methods to reset TVs. The first is simple to do; a Hard Reset. The other is somewhat skilled; is a Factory Reset (System Reset). To make it a hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so. If you do this by overnight is better. This procedure will make it a hard reset. If you want to make it a system reset [Factory Reset]; you have to enter its service mode option, and select the factory reset option. If you wish to get some details; visit the site linked here.

Apr 23, 2017 | Akai LCT2701TD Television

1 Answer

Color wheel


could be a jumper on the DMD board that must be removed, look for a small sticker that points to the jumper, or it could be a setting in the factory mode, mute-182-power will get you in there, check the settings for the color wheel

Jul 17, 2008 | Samsung HLP4663W 46" Rear Projection HDTV

4 Answers

Color is bad after installing color wheel in samsung dlp tv


Most times color does not to be reset. If you have a very ugly green or blue picture, then you did not pull the jumper on the dm board. This jumper must be removed when a bering type color wheel has be replaced with a new airless bering color wheel.

Mar 31, 2008 | Samsung DLP HL-P4663W 46" Rear Projection...

2 Answers

Samsung dlp color issue


I just had a service tech out and replaced the color wheel. now i have the same issue with the color...the people all look blue. He told me that now the the digital board is bad. It's the board were all of the connections go. I'm not convinced, as I remember reading something about color settings needing to be adjusted after color wheel replacement.

Mar 28, 2008 | Samsung HL-P6163W 61" TV

Not finding what you are looking for?
Samsung HLP4663W 46" Rear Projection HDTV Logo

Related Topics:

145 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74136 Answers

Henry  Thomas
Henry Thomas

Level 3 Expert

1074 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1667 Answers

Are you a Samsung Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...