Question about Siemens Gigaset 4000 Phone

3 Answers

Siemens Gigaset 4200

I have been using above 4200 giga set for quite a while but when tried to switch hand sets one of them gone in to the 'Searching mood and displaying 'Searching' and flashing all the time but bring back to normal working mood. Any body has any sugestion?

Posted by on

  • Urlauber Mar 10, 2008

    I had three functioning phones - Siemens Gigaset 4215 BASE, SL35 and 4000 handsets and wanted to add an additional 4200 handset. Followed the instructions to turn off base and hold reset button for 20 seconds while applying power. Now only the Base unit works.

×

Ad

3 Answers

Pelase.. can i help me? i have a phone gigase 4430 and handset 4400. the base and hanset don`t work after procedure of reset (Hold down the page/registration key on the bottom of the base and keep it held down while you apply power to the base. After applying power, keeping the button down, count to 20. Then release the button and get each handset.)
Any body has any sugestion?.. PLEASE HELP MEE
dodge1800@yahoo.com.ar.
thanks in advance!

Posted on Aug 23, 2008

Ad

Pelase.. can i help me? i have a phone gigase 4430 and handset 4400. the base and hanset don`t work after procedure of reset (Hold down the page/registration key on the bottom of the base and keep it held down while you apply power to the base. After applying power, keeping the button down, count to 20. Then release the button and get each handset.)
Any body has any sugestion?.. PLEASE HELP MEE
dodge1800@yahoo.com.ar.
thanks in advance!

Posted on Aug 23, 2008

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 106 Answers

Hello, Yes this happens when you add a additional handset to the system when all the intercom numbers are full. When registering a new handset, it "kicks out" on of the other handsets when it registers. The only way to correct that problem is to default your base and register each handset again, one by one. You won't lose your handset settings, but you will lose your messages and greetings, so check them before doing so. To default your unit, get all your handsets and go to your base. Unplug the power from your base. Hold down the page/registration key on the bottom of the base and keep it held down while you apply power to the base. After applying power, keeping the button down, count to 20. Then release the button and get each handset. Register each handset, and they will number themselves 1 through 4. If you need additional assistance, service or need to purchase another handset or base (you can register each handset to up to four bases to increase your range, this is unique feature in the cordless industry), you can go to www.cordlessrepair.com for all your Siemens cordless needs. Good Luck ! Let us know how it goes, we have a testimonial page on the website for people to leave comments on the technical tips or assistance they receive from our technicians.

Posted on Jan 11, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Siemens Gigaset 4200 Cordless keep searching for base


The handset should be returned to the charging station, let it set for a few seconds. If this is a satellite phone, make sure the main phone "base unit" is connected to phone outlet and plugged in. After the phone has established its physical connection with the base again you can remove it and use it like normal.

May 18, 2012 | Siemens Gigaset 4200 Cordless Expansion...

1 Answer

Handset won't work


I went through this exercise with a Siemens Gigaset 8800. The solution is to DE-register the handset first. Then register it with your base. This function can likely be accessed in the handset menu. The phone you purchased is apparently still registered to the previous user's base.

May 23, 2009 | Siemens Gigaset 4200 Cordless Expansion...

1 Answer

The screen on the hand set displays searching


PIN restore Gigaset 4010/4015 base
If the PIN code forgotten your Siemens Gigaset 4010 / 4015 base (Classic / Comfort / Micro) then follow these steps to create the reset:

* Take the power cord out
* Press the button and on the bottom of the base and hold
* Insert the adapter into the outlet, hold the base button
* Wait 30 seconds, keep the button pressed
* Wait 10 more seconds and remove the adpter from the outlet
* Put the adapter back in

The unit is now reset and the PIN code is 0000.

Mar 22, 2009 | Siemens Gigaset 4015 Cordless Phone

1 Answer

Cd30 handset the word searching keeps flashing unable to use phone


I have a problem with my Siemens Gigaset 4200 Hand held it continuously flashes searching for single and can't seem to find one.

Please Help Me. Beast68

Aug 21, 2008 | Lands Phones

3 Answers

Problem Siemens Gigaset 4000 and 4200


You did get spiked from the power company, and your system needs repair. Go to www.cordlessrepair.com for help.

Jun 23, 2008 | Siemens Gigaset 4000 Phone

1 Answer

Problem Siemens Gigaset 4000 and 4200


If you had a storm, and the only handset that works shows line in use, then your base has gone bad and needs repair. The reason the phones are flashing base 1 or something to that effect is because they don't see the base anymore, which typically means no phones will see your base, so its odd that one phone is actually seeing the base. Either way, you can try re-registering the phones to the base, but if you get the line in use after they register (if they will register), then your base is bad. If they won't register, your base is bad. For additional assistance you can go to www.cordlessrepair.com

Jun 15, 2008 | Lands Phones

1 Answer

Help with siemens giga set4200


Hello, it sounds as if your base has gotten corrupt somehow. You can try defaulting it, but keep in mind you will lose all your messages, and will need to re-register your handsets if it works. To do so, get all your handsets together near you base. Unplug the power from your base and turn the base over. Push and hold down the Page/Registration key and keep it held down while you plug the power back in. Keep the key held down for at least 15 seconds, then release and begin registering your handsets. If you need help, I can email you a "cheat sheet" on doing so. You can contact me at www.cordlessrepair.com Good Luck !

Nov 05, 2007 | Siemens Gigaset 4000 Phone

1 Answer

No Power to Cordeless Phone


I have been using siemens gigaset4215 for quite a while if worked well. Couple of days back when I tried to change name and intercom number on two hand sets one working well but other continue displaying 'Searching' and flashing. I tried but could not bring it to normal working mood. Any body has any sugestion?

Aug 14, 2007 | Siemens Gigaset 4000 Phone

3 Answers

My phone can not reset


I am having the exact same issue! I tested the jack with another phone and it works. It is something in the phone. I suspect there is a "clear" button somewhere - but can't find the owners manual.

Dec 13, 2006 | Siemens Gigaset 4200 Cordless Expansion...

Not finding what you are looking for?
Siemens Gigaset 4000 Phone Logo

1,143 people viewed this question

Ask a Question

Usually answered in minutes!

Top Siemens Lands Phones Experts

Cindy Wells

Level 3 Expert

5613 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Kolbrun...

Level 3 Expert

1215 Answers

Are you a Siemens Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...